This commits adds the hairpin get capabilities function.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit adds the support for creating Tx hairpin queues.
Hairpin queue is a queue that is created using DevX and only used
by the HW.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Currently all Tx queues are created using Verbs.
This commit modify the naming so it will not include verbs,
since in next commit a new type will be introduce (hairpin)
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit adds the support for creating Rx hairpin queues.
Hairpin queue is a queue that is created using DevX and only used
by the HW. This results in that all the data part of the RQ is not being
used.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit query and store the hairpin capabilities from the device.
Those capabilities will be used when creating the hairpin queue.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit introduce hairpin queue type.
The hairpin queue in build from Rx queue binded to Tx queue.
It is used to offload traffic coming from the wire and redirect it back
to the wire.
There are 3 new functions:
- rte_eth_dev_hairpin_capability_get
- rte_eth_rx_hairpin_queue_setup
- rte_eth_tx_hairpin_queue_setup
In order to use the queue, there is a need to create rte_flow
with queue / RSS action that targets one or more of the Rx queues.
Signed-off-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The queue state defines are internal to the DPDK.
This commit moves them to a private header file.
Signed-off-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Adding support to parse higig2 header in RTE flow for octeontx2.
And added devargs to configure port for higig2.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding support to configure specific switch types like high2 and dsa
on a port. When this switch type is configured, it is expected that
all the traffic on that port should be of specific type only.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
LBK interface does not support any flow control related
HW configurations.
Skip flow control set requests on LBK bound ethports.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
VF index needs to be checked against maxvf count
before incrementing it for preparing pf_func.
Fixes: 520270d518 ("net/octeontx2: support PF and VF action")
Cc: stable@dpdk.org
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
New MTU value is not propagated to vport in HW when MTU update request
is sent while ports are stopped.
This patch fixes the logic error for above mentioned condition.
Fixes: d121a6b5f7 ("net/qede: fix VF MTU update")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Reviewed-by: Rasesh Mody <rmody@marvell.com>
In our testing we have identified a critical FW bug. Performance
is degraded significantly for certain packet sizes with 8.40.25.0 FW.
This patch updates the FW to version 8.40.33.0. The updated FW has a
fix to performance issue.
The patch also adds initialization for FW overlay RAM as part of
hardware initialization which is required by the new FW.
Fixes: 3b307c55f2 ("net/qede/base: update FW to 8.40.25.0")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Add checking of l4_csum_checked and frag flags before checking the
l4_csum_error flag.
In case of IP fragment/unchecked L4 csum - add PKT_RX_L4_CKSUM_UNKNOWN
flag to the indicated mbuf.
Fixes: 1173fca25a ("ena: add polling-mode driver")
Cc: stable@dpdk.org
Signed-off-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Maciej Bielski <mba@semihalf.com>
Reviewed-by: Michal Krawczyk <mk@semihalf.com>
Flow director rule can't be created when the flow table is nearly full.
The patch fixed this issue to enable created flows reaching the maximum
number.
Fixes: 1a2fc1799f ("net/ice: reject duplicated flow for flow director")
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
This patch corrects key_len and queues check. The key_len and queues
are not supported to configure for RSS in rte_flow.
Fixes: 5ad3db8d4b ("net/ice: enable advanced RSS")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
A new gtp flow's profile will capture other profile's non-gtp ptypes
which is unexpected. For example, a RSS flow for inner IP / UDP on
regular tunnel packet's behaviour will be changed by a following GTP RSS
rule where inner IP is the only inputset, since all tunnel ptypes have
been shifted from the first profile to the second one.
The patch fixes the issue by correcting the ptype mapping that prevents
the ptype shift.
Fixes: d1c2f76b44 ("net/ice/base: support GTP and PPPoE protocols")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Simei Su <simei.su@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
This patch corrects logic error for checking rss->types to match
pattern in RSS action parser.
Fixes: 5ad3db8d4b ("net/ice: enable advanced RSS")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Port validation should be prior to getting device data
to avoid segment fault. This patch fixed the segment fault
caused by invalid port using.
Fixes: 6d72657ce3 ("net/bonding: add other aggregator modes")
Fixes: 112891cd27 ("net/bonding: add dedicated HW queues for LACP control")
Cc: stable@dpdk.org
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Acked-by: Chas Williams <chas3@att.com>
Rx queue for LRO is created using DevX. Flows created on this queue
must use the DV flow engine.
This patch adds check of dv_flow_en=1 when configuring LRO support
on device spawn.
Documentation is updated accordingly.
Fixes: 175f1c21d0 ("net/mlx5: check conditions to enable LRO")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
In non-pipeline mode, switch should be used as FDIR'S backup.
The patch fixed rule can't be created when FDIR'S flow table is full.
Fixes: 7615a68950 ("net/ice: rework for generic flow enabling")
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
When PHY reset is blocked as is the case when BMC is connected via NC-SI
do not set GO_LINKD bit in PHY power management register in dev_stop as
this will disconnect the PHY. Also, in dev_close clear the GO_LINKD
bit only if PHY reset is not blocked
Fixes: 3af34dec0b ("igb: force phy power up/down")
Cc: stable@dpdk.org
Signed-off-by: Shweta Choudaha <shweta.choudaha@att.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
The original packet type table's hw-ptype index to sw-ptype
mapping is wrong. This patch fixed the issue.
Fixes: ab9dccf09a ("net/ice: support packet type getting")
Cc: stable@dpdk.org
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
There's a corner case that all the Rx queue mbufs are allocated but none
of them is used, this patch fixes mbuf free for this case.
Fixes: b6719f8a04 ("fm10k: release mbuf for vector Rx")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Anna Lukin <annal@silicom.co.il>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
For the public APIs of DPDK libraries we run checks for correct use of
experimental tags, and also do dynamic generation of the version file to
its window's equivalent. Although must drivers don't export APIs, some do,
so these checks are relevant and should be copied from lib/meson.build to
drivers/meson.build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Call check-experimental-syms.sh script as part of the meson build to ensure
that all functions are correctly tagged.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The check-experimental-syms.sh script was finding the map-list-symbol.sh
script using $RTE_SDK, which is the variable set when using the "make"
build system. To make this script more independent, we just use the current
path of the script as the location to find its companion script.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Session contexts are used for temporary storage when processing a
packet.
If packets for the same session are to be processed simultaneously on
multiple cores, separate contexts must be used.
Note: with openssl 1.1.1 EVP_CIPHER_CTX can no longer be defined as a
variable on the stack: it must be allocated. This in turn reduces the
performance.
Fixes: d61f70b4c9 ("crypto/libcrypto: add driver for OpenSSL library")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
This patch usages the anti replay window size to config
the anti replay checking in decap path for lookaside
IPSEC offload
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Right now majority of lib mode functional tests enable
library mode with '-w N' option.
It worked till recently, as legacy mode didn't support replay window.
Now it changed.
To fix - use '-l' option to enable library mode explicitly.
Fixes: 9297844520 ("examples/ipsec-secgw: add scripts for functional test")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The rte_security lib has introduced replay_win_sz,
so it can be removed from the rte_ipsec lib.
The relevant tests, app are also update to reflect
the usages.
Note that esn and anti-replay fileds were earlier used
only for ipsec library, they were enabling the libipsec
by default. With this change esn and anti-replay setting
will not automatically enabled libipsec.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
At present the ipsec xfrom is missing the important step
to configure the anti replay window size.
The newly added field will also help in to enable or disable
the anti replay checking, if available in offload by means
of non-zero or zero value.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
As per RFC4868, SHA-256 should use 128 bits of ICV.
Fixes: b5350285ce ("examples/ipsec-secgw: support SHA256 HMAC")
Cc: stable@dpdk.org
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The protocol aware ipsec descriptor has been modified to
use ctr_initial value of 1 and salt configured for ipsec SA.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
As per RFC3686, the initial aes-ctr counter value should be '1' for use
in ipsec. The patches changes SEC descriptor for using correct counter
value. In addition, it drops a redundant parameter for passing IV while
creating the descriptor.
This patch adds changes for all NXP crypto PMDs
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch throw the warning when using truncated digest
len for SHA256 case.
As per RFC4868, SHA-256 should use 128 bits of ICV.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch enables short buffer and 12 bit IV AES-CTR cases
for dpaax_sec pmds.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch add support for AES-128-GCM, when used in
lookaside protocol offload case.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
These are supported when using protocol offload mode or when
in chain mode.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
These are supported when using protocol offload mode or in chain mode.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
set the pdcp capa_flags to 0 by default.
Fixes: a1173d5559 ("crypto/dpaa_sec: support PDCP offload")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
