The length of the longest header name is used to adjust the padding
of the header row automatically, instead of fixed length.
The previous length (10) was too short for vdev_netvsc.
Fixes: 6086ab3bb3 ("net/vdev_netvsc: introduce Hyper-V platform driver")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The font size of the header row is reduced in order to shrink
the column size of the tables.
It is required for the NICs features table which is too large to fit
in the page width.
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
I will not be directly working on the DPDK project anymore.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The drivers directory contains some sub-directories
for each kind of device (or bus, mem):
net, crypto, event, raw
They are not suffixed with "dev" because it is obvious.
For consistency, the sub-directory drivers/bbdev/
is renamed to drivers/baseband/.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
If we receive messages that don't have a callback registered for
them, and we haven't finished initialization yet, it can be reasonably
inferred that we shouldn't have gotten the message in the first
place. Therefore, send requester a special message telling them to
ignore response to this request, as if this process wasn't there.
Since it is not possible for primary process to receive any messages
during initialization, this change in practice only applies to
secondary processes.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
When sending IPC messages, prevent new sockets from initializing.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Currently, filter value is hardcoded and disconnected from actual
value returned by eal_mp_socket_path(). Fix this to generate filter
value by deriving it from eal_mp_socket_path() instead.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Currently, primary process initialization is finalized by setting
the RTE_MAGIC value in the shared config. However, it is not
possible to check whether secondary process initialization has
completed. Add such a value to internal config.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Unlocking the action list before sending message and locking it
again afterwards introduces a window where a response might
arrive before we have a chance to start waiting on a condition,
resulting in timeouts on valid messages.
Fixes: 783b6e5497 ("eal: add synchronous multi-process communication")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
The array pointers were used without index.
Fixes: b9083ea5e0 ("net/dpaa: further push mode optimizations")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
rte_cycles.h shall be included instead of rte_cycles_64.h
dpaa_eventdev.c:32:27:
fatal error: rte_cycles_64.h: No such file or directory
Fixes: 9caac5dd1e ("event/dpaa: introduce PMD")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Rather than trying to use meson's build-in detection for libpcap, and
having to special-case cross-building, just check for the presence of
pcap.h and the pcap library.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add remaining subdirectories in the app folder to the meson build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
All other apps in the app folder use "-" rather than "_" to separate words
in the app name, so rename proc_info to be consistent.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Since most apps are built in largely the same way, generalize the logic
into a foreach loop in app/meson.build file.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch fixes the build dependency of various
dpaaX components, when the dpaa or fslmc bus is disabled,
or VFIO is disabled.
Fixes: 1ee9569576 ("config: enable dpaaX drivers for generic ARMv8")
Cc: stable@dpdk.org
Reported-by: Yongseok Koh <yskoh@mellanox.com>
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The dynamic link is broken for ARM platform because the dependencies
of the DPAA PMD are not declared.
Fixes: 83c82e15e1 ("app/testpmd: support loopback config for DPAA")
Cc: stable@dpdk.org
Reported-by: Marco Varlese <mvarlese@suse.de>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch fixes the compilation problem with rte_smp_mb,
when there is else clause following it, as in test_barrier.c.
Fixes: 05c3fd7110 ("eal/ppc: atomic operations for IBM Power")
Cc: stable@dpdk.org
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
The ip_pipeline and qos_meter example apps now use experimental APIs so
this fact needs to be flagged in their meson.build files.
Fixes: c06ddf9698 ("meter: add configuration profile")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds support for meter configuration profiles.
Benefits: simplified configuration procedure, improved performance.
Q1: What is the configuration profile and why does it make sense?
A1: The configuration profile represents the set of configuration
parameters for a given meter object, such as the rates and sizes for
the token buckets. The configuration profile concept makes sense when
many meter objects share the same configuration, which is the typical
usage model: thousands of traffic flows are each individually metered
according to just a few service levels (i.e. profiles).
Q2: How is the configuration profile improving the performance?
A2: The performance improvement is achieved by reducing the memory
footprint of a meter object, which results in better cache utilization
for the typical case when large arrays of meter objects are used. The
internal data structures stored for each meter object contain:
a) Constant fields: Low level translation of the configuration
parameters that does not change post-configuration. This is
really duplicated for all meters that use the same
configuration. This is the configuration profile data that is
moved away from the meter object. Current size (implementation
dependent): srTCM = 32 bytes, trTCM = 32 bytes.
b) Variable fields: Time stamps and running counters that change
during the on-going traffic metering process. Current size
(implementation dependent): srTCM = 24 bytes, trTCM = 32 bytes.
Therefore, by moving the constant fields to a separate profile
data structure shared by all the meters with the same
configuration, the size of the meter object is reduced by ~50%.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Add template release notes for DPDK 18.05 with inline
comments and explanations of the various sections.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Fixes: 924e84f873 ("aesni_mb: add driver for multi buffer based crypto")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Remove reference to Fedora 18 which is EOL-ed, reword
surrounding sentences to read correctly.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Ethdev APIs to add callback return the callback object as "void *",
update return type to actual object type
"struct rte_eth_rxtx_callback *"
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Announce internal PMD API change in the function to set the default MAC
address. The objective is to be able to notify errors occurring in the
PMD.
Link: https://dpdk.org/dev/patchwork/patch/32284/
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
