Update the testpmd doc as there are new HW VLAN commands/options.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
This patch adds information to testpmd_funcs.rst file,
about limited number of vlan_ids possible to be enabled
in a filter. This is limited to the maximum number of entries
possible in the VFTA table.
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The patch introduces following commands.
- port attach [ident]
- port detach [port_id]
- attach: attaching a port
- detach: detaching a port
- ident: pci address of physical device.
Or device name and parameters of virtual device.
(ex. 0000:02:00.0, eth_pcap0,iface=eth0)
- port_id: port identifier
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch adds a new section for describing port hotplug framework.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
This documentation covers implementation details, features and limitations,
configuration, prerequisites and provides a usage example.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Since DPDK now has support for the in-tree uio_pci_generic driver,
update the programmers guide document to reference this module, and to use it
in preference to the igb_uio driver, which is DPDK-specific.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Since DPDK now has support for the in-tree uio_pci_generic driver,
update the GSG document to reference this module, and to use it
in preference to the igb_uio driver, which is DPDK-specific.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This library provide API to measure time spend in particular parts of
code and to calculate optimal polling time.
To calculate a those statistics application code need to be divided into
parts (called jobs) that do something. It is up to application to decide
what is considered a job.
Series of jobs must be surrounded with the rte_jobstats_context_start()
and rte_jobstats_context_finish() calls. After that, jobs might be
started. Each job must be surrounded with rte_jobstats_start() and
rte_jobstats_finish() calls.
After job finishes its execution, period in which it should be called
again is adjusted. It might be used to minimize time wasted on
unnecessary polls/calls. Adjustment is based on data provided by job
itself (ex: number of packets it processed).
After all jobs in serie are executed fallowing statistics are updated
and might be used by application. Statistics can be reset. Some of
provided statistic data:
- total/min/max execution - time spent in executing jobs.
- total/min/max management - time spent outside execution area. This
value might be used to measure overhead of scheduling jobs. This time
also contains overhead of rte_jobstats library itself.
- number of loops that executed at least one job
- executed jobs
- time when statistics were reset.
Each job provide total/min/max execution time and execution count
statistics.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Following commands of syn filter are removed:
- add_syn_filter (port_id) priority (high|low) queue (queue_id)
- remove_syn_filter (port_id)
- get_syn_filter (port_id)
New command is added for syn filter by using filter_ctrl API and new
syn filter structure:
- syn_filter (port_id) (add|del) priority (high|low) queue (queue_id)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Following commands of flex filter are removed:
- add_flex_filter (port_id) len (len_value) bytes (bytes_string) mask (mask_value)
priority (prio_value) queue (queue_id)
- remove_flex_filter (port_id) index (idx)
- get_flex_filter (port_id) index (idx)
New command is added for flex filter by using filter_ctrl API and new flex filter structure:
- flex_filter (port_id) (add|del) len (len_value) bytes (bytes_value) mask (mask_value)
priority (prio_value) queue (queue_id)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add requirements about compiler and distribution support.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch describes how to build and run he new packet ordering sample
application that exercises the reorder library.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch introduces a new section in the programmers guide describing
the reorder library.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Adding a document describing rudimentary ABI policy and adding notice space for
any deprecation announcements
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Added instructions for updating from DPDK 1.7.0 to 1.8.0
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Known issue regarding iommu/VT-d and igb_uio in Linux kernel version 3.15
to 3.17 where unbinding the device from the driver removes the 1:1 mapping
in the iommu resulting in IOMMU/DMAR errors when the device tries to
access memory.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Removed resolved issues from known issues section.
Added new resolved issues to resolved issues section.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Added to New and Supported features for VXLAN feature.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Added new and existing names of sample apps to list of
sample apps in release notes.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
fixed setup menu options in linux gsg to
keep in synch with setup.sh
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
In Release 1.8, the mbuf structure was significantly reworked to add
extra information, leading to the structure being split across two
cache lines, and the data pointer being replaced by an offset. The
description of the library in the programmer's guide document needs
to be updated to take account of these changes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch added IBM ppc_64 descriptions, including architecture
support, compiling requirements on Linux.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Removing Appendix A from Release Notes as Intel Licensing information is
no longer relevant in this document.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Removed redundant Intel legal info from linux gsg.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Removed multiple references to Intel(R) DPDK where no longer
relevant.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Removed references to Intel which
are no longer relevant in linux gsg.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>