According to the suggestion of our legal department,
to standardize the copyright license of our code to
avoid potential copyright risks, we make a unified
modification to the "Hisilicon", which was nonstandard,
in the main modules we maintain.
We change it to "HiSilicon", which is consistent with
the terms used on the following official website:
https://www.hisilicon.com/en/terms-of-use.
Fixes: 565829db8b8f ("net/hns3: add build and doc infrastructure")
Fixes: 952ebacce4f2 ("net/hns3: support SVE Rx")
Fixes: e31f123db06b ("net/hns3: support NEON Tx")
Fixes: c09c7847d892 ("net/hns3: support traffic management")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The driver should not use the fixed value as the validity check of
RSS indirection table size with HW supported. As a result, it will
cause misjudgment when the RSS RETA size with HW supported have
changed.
Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Rename some function about RSS implement functions
in order to make the functions naming style more
reasonable and consistency.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
For Kunpeng930 NIC hardware, it supports to use dst/src port to
RSS hash for ipv6-sctp packet type. However, the Kunpeng920 NIC
hardware is different with it. The Kunpeng920 NIC only supports
dst/src ip to RSS hash for ipv6-sctp packet type.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
The maximum number of queues for one TC hns3 PF PMD driver supported is
64 based on hns3 network engine with revision_id equals 0x21, while it
is expanded up to 512 on hns3 network engine with revision_id equals
0x30.
So the following points need to be modified to maintain better
compatibility.
1) Using a extended rss_size_max field as the maximum queue number of
one TC PF driver supported.
2) The data type of the RSS redirection table needs to be changed from
uint8_t to uint16_t.
3) rss_tc_mode modification
The bitwidth of tc_offset, meaning the rx queue index, has to expand
from 10 bit to 11 bits. The tc_size, meaning the exponent with base 2
of queues supported on TC, needs to expand from 3 bits to 4 bits.
4) RSS indirection table modification
Currently, a field with 7 bits width is used to record the queue
index for RSS indirection table. It means that PF needs to expand the
queue index field to 9 bits. As the RSS indirection table config
command reserved 4 bytes to configure the RSS queue index, a extern
field can be added. So an entries of RSS indirection table queue
index has two fields to set: rss_result_l and rss_result_h, while
rss_result_l records the lower 8 bits and rss_result_h records the
higher 1 bit.
In addition, 2~4 modifications is also compatible with hns3 VF PMD
driver.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
When user create a flow without RSS by calling rte_flow_create API and then
destroy it by calling rte_flow_flush API, driver should not clear RSS rule.
A reasonable handling method is that when user creates an RSS rule, the
driver should clear the created RSS rule when flushing destroy all flow
rules. Also, hw->rss_info should save the RSS config of the last success
RSS rule. When create n RSS rules, the RSS should not be disabled before
the last RSS rule destroyed.
Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch support for hash type input set configuration. That is, upper
level application can call the rte_flow_create or
rte_eth_dev_rss_hash_update API to set the specified tuples by RSS types.
As a result, the hardware can selectively use the tuples to perform hash
calculation based on the specific tuple to enable the fields.
The following uses the RSS flow as an example:
When application calls the rte_flow_create API to select tuple input for
ipv4-tcp l3-src-only, the driver can enable the ipv4-tcp src field of the
hardware register by calling the internal function named
hns3_set_rss_tuple_by_rss_hf according to the RSS types in actions list.
In testpmd application, the command as follows:
testpmd> flow create 0 ingress pattern end actions rss types \
ipv4-tcp l3-src-only end queues 1 3 end / end
The following use the rte_eth_dev_rss_hash_update as an example:
if the user set the select tuple input for ipv4-tcp l3-src-only by
rte_eth_rss_conf structure in rte_eth_dev_rss_hash_update. the next
flow is the same as that of the RSS flow. In testpmd application,
the command as follows:
testpmd> port config all rss ipv4-tcp l3-src-only
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch adds support of symmetric algorithm of RSS.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
For the current hns3 PMD driver, there are some RSS related bugs at
the following scenes:
1. Start the application with the number of Rx queues equals 1(--rxq=1),
modify the number of Rx queue to some number greater than 1 during
normal operation. As a result, upper application can't receive packets
from multiple rx queues.
2. Start testpmd application with the option disable-rss and the number
of Rx queue is greater than 1(--disable-rss --rxq=N, N>1). As a result,
upper application still can receive packets from multiple rx queues.
The root cause as below:
There are some error configuration in the RSS indirection table of hns3
network engine.
This patch fixes them with the following modification.
1. When RSS size is changed, we need to update RSS redirection table
maintained by driver and configure them to hardware. Besides, during
the entire reset process, we need to ensure that the RSS table
information are not overwritten and configured directly to the hardware
in the RESET_STAGE_RESTORE stage of the reset process.
2. When sarting testpmd application with the options disable-rss, it
doesn't need to configure RSS redirection table to hardware.
Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch removed some unused macros defined in hns3_rss.h,
these macros are used to set tuples for abandoned RTE_ETH_FILTER_HASH
in hns3_dev_filter_ctrl().
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch adds support for RSS of hns3 PMD driver. It included the
follow functions:
In file hns3_rss.c:
1) Set/query hash key, rss_hf by .rss_hash_update/.rss_hash_conf_get ops
callback functions.
2) Set/query redirection table by .reta_update/.reta_query. ops callback
functions.
3) Set/query hash algorithm by .filter_ctrl ops callback function when
the 'filter_type' is RTE_ETH_FILTER_HASH.
In file hns3_flow.c:
1) Set hash key, rss_hf, redirection table and algorithm by .create ops
callback function.
2) Disable RSS by .destroy or .flush ops callback function.
3) Check the effectiveness of the RSS's configuration by .validate ops
callback function.
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
