Add few simple eBPF programs as an example.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Unit test cases for Multi-core mode, Fail-over mode,
anf Packet distribution mode are added to improve code coverage.
Signed-off-by: Jananee Parthasarathy <jananeex.m.parthasarathy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add tests that check if device configuration
is not successful when providing invalid parameters.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Add test that checks if multiple xforms can be
handled on a single enqueue call.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Add test that checks if all compression levels
are supported and compress a buffer correctly.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Add test that checks if multiple operations with
different buffers can be handled on a single enqueue call.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
This commit introduces the initial tests for compressdev,
performing basic compression and decompression operations
of sample test buffers, using the Zlib library in one direction
and compressdev in another direction, to make sure that
the library is compatible with Zlib.
Due to the use of Zlib API, the test is disabled by default,
to avoid adding a new dependency on DPDK.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Picking a company stock ticker for a PMD name might not be a best approach
in a long run since name is too generic.
This patch addresses that and renames mrvl to mvsam.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Added testsuite to test the crypto adapter functionality.
The testsuite detects the HW/SW event & crypto devices and
their capabilities. Depending upon the capability, adapter
is confgured and modes are tested.
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Build errors occur on CentOS 7 with GCC 4.8.5 20150623 in the
event_timer_adapter_test autotest; the
-Werror=missing-field-initializers option causes the compiler to emit
messages like "error: missing initializer for field ‘priority’ of
‘struct <anonymous>’" in several places.
Add -Wno-missing-field-initializers to the test's CFLAGS to allow the
current syntax if we are using GCC 5.0 or lower.
Fixes: d1f3385d00 ("test: add event timer adapter auto-test")
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add dedicated parameter structure for cuckoo hash. The cuckoo hash from
librte_hash uses slightly different prototype for the hash function (no
key_mask parameter, 32-bit seed and return value) that require either
of the following approaches:
1/ Function pointer conversion: gcc 8.1 warning [1], misleading [2]
2/ Union within the parameter structure: pollutes a very generic API
parameter structure with some implementation dependent detail
(i.e. key mask not available for one of the available
implementations)
3/ Using opaque pointer for hash function: same issue from 2/
4/ Different parameter structure: avoid issue from 2/; hopefully,
it won't be long before librte_hash implements the key mask feature,
so the generic API structure could be used.
[1] http://www.dpdk.org/ml/archives/dev/2018-April/094950.html
[2] http://www.dpdk.org/ml/archives/dev/2018-April/096250.html
Fixes: 5a80bf0ae6 ("table: add cuckoo hash")
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Single producer / single consumer mempool handle is stored in static
variable and the mempool allocated if stored value is NULL.
If the mempool is freed, NULL should be restored to make sure that
the mempool is allocated once again next time when the test is run.
Fixes: 8ef772aee0 ("app/test: rework mempool test")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Since RTE_MAX_NUMA_NODES is configurable, the existing socket number
could greater than RTE_MAX_NUMA_NODES. Optimize test case to cover this
situation.(i.e RTE_MAX_NUMA_NODES=1)
Fixes: 45f1b6e868 ("app: add new tests on eal flags")
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
The previous symbols were deprecated for two releases.
They are now marked as such and cannot be used anymore.
They are replaced by ones respecting the new namespace that are marked
experimental.
As a result, eth_dev attach and detach are slightly reworked to follow
the changes.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The current test will not be compatible anymore with a private
devargs list.
Moreover, the new functions should have new tests, while the existing
API will be removed.
The current unit tests are thus obsolete and hereby removed.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Using private api `guest_channel_host_connect()`
will cause shared library build failure:
test_power_kvm_vm.c:(.text+0x2cb):
undefined reference to `guest_channel_host_connect'
So revert the changes done.
Fixes: d550a8cc31 ("app/test: enhance power manager unit tests")
Reported-by: Bruce Richardson <bruce.richardson@intel.com>
Suggested-by: David Hunt <david.hunt@intel.com>
Signed-off-by: Jananee Parthasarathy <jananeex.m.parthasarathy@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Move rte_mempool_xmem_size() code to internal helper function
since it is required in two places: deprecated rte_mempool_xmem_size()
and non-deprecated rte_mempool_op_calc_mem_size_default().
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Unit Testcases are added for power_acpi_cpu_freq,
power_kvm_vm_test to improve coverage
Signed-off-by: Jananee Parthasarathy <jananeex.m.parthasarathy@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
The code to convert IPv4 and IPv6 address strings into a binary format
(inet_ntop) was included in the cmdline library because the DPDK was
historically compiled in environments where the standard inet_ntop()
function is not available. Today, this is not the case and the standard
inet_ntop() can be used.
This patch removes the internal inet_ntop*() functions and their
specific license.
There is a small functional impact: IP addresses like 012.34.56.78
are not valid anymore.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Only RTE_CRYPTO_CIPHER_AES_CBC cipher
algorithm are tested as unit test, it is supported both by the
cryptodev-backend-builtin and cryptodev-vhost-user of qemu side.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Fan Zhang <roy.fan.zhang@intel.com>
Added support for AES CMAC hash algorithm with 128-bit key,
which has been added in the v0.49 of the IPSec Multi-buffer lib.
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
MRVL Crypto PMD supports most of the hash algorithms covered
by test suites thus specific bits should be set in pmd_masks.
Otherwise blockcipher authonly test returns success even though no
real tests have been executed.
Fixes: 84e0ded38a ("test/crypto: add mrvl crypto unit tests")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application assume a valid port index is in the range [0..count[.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be valid
- old ports being detached (RTE_ETH_DEV_UNUSED) can be valid
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the function rte_eth_dev_is_valid_port.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be seen
- old ports being detached (RTE_ETH_DEV_UNUSED) can be seen as ghosts
- failsafe sub-devices (RTE_ETH_DEV_DEFERRED) will be seen by the application
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the iterator RTE_ETH_FOREACH_DEV.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Change the prototype and the behavior of dev_ops->eth_mac_addr_set(): a
return code is added to notify the caller (librte_ether) if an error
occurred in the PMD.
The new default MAC address is now copied in dev->data->mac_addrs[0]
only if the operation is successful.
The patch also updates all the PMDs accordingly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add new interrupt handle type of RTE_INTR_HANDLE_DEV_EVENT, for
device event interrupt monitor.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
It's there, so we might as well use it. Some operations will be
sped up by that.
Since we have to allocate an fbarray for memzones, we have to do
it before we initialize memory subsystem, because that, in
secondary processes, will (later) allocate more fbarrays than the
primary process, which will result in inability to attach to
memzone fbarray if we do it after the fact.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Before, we were aggregating multiple pages into one memseg, so the
number of memsegs was small. Now, each page gets its own memseg,
so the list of memsegs is huge. To accommodate the new memseg list
size and to keep the under-the-hood workings sane, the memseg list
is now not just a single list, but multiple lists. To be precise,
each hugepage size available on the system gets one or more memseg
lists, per socket.
In order to support dynamic memory allocation, we reserve all
memory in advance (unless we're in 32-bit legacy mode, in which
case we do not preallocate memory). As in, we do an anonymous
mmap() of the entire maximum size of memory per hugepage size, per
socket (which is limited to either RTE_MAX_MEMSEG_PER_TYPE pages or
RTE_MAX_MEM_MB_PER_TYPE megabytes worth of memory, whichever is the
smaller one), split over multiple lists (which are limited to
either RTE_MAX_MEMSEG_PER_LIST memsegs or RTE_MAX_MEM_MB_PER_LIST
megabytes per list, whichever is the smaller one). There is also
a global limit of CONFIG_RTE_MAX_MEM_MB megabytes, which is mainly
used for 32-bit targets to limit amounts of preallocated memory,
but can be used to place an upper limit on total amount of VA
memory that can be allocated by DPDK application.
So, for each hugepage size, we get (by default) up to 128G worth
of memory, per socket, split into chunks of up to 32G in size.
The address space is claimed at the start, in eal_common_memory.c.
The actual page allocation code is in eal_memalloc.c (Linux-only),
and largely consists of copied EAL memory init code.
Pages in the list are also indexed by address. That is, in order
to figure out where the page belongs, one can simply look at base
address for a memseg list. Similarly, figuring out IOVA address
of a memzone is a matter of finding the right memseg list, getting
offset and dividing by page size to get the appropriate memseg.
This commit also removes rte_eal_dump_physmem_layout() call,
according to deprecation notice [1], and removes that deprecation
notice as well.
On 32-bit targets due to limited VA space, DPDK will no longer
spread memory to different sockets like before. Instead, it will
(by default) allocate all of the memory on socket where master
lcore is. To override this behavior, --socket-mem must be used.
The rest of the changes are really ripple effects from the memseg
change - heap changes, compile fixes, and rewrites to support
fbarray-backed memseg lists. Due to earlier switch to _walk()
functions, most of the changes are simple fixes, however some
of the _walk() calls were switched to memseg list walk, where
it made sense to do so.
Additionally, we are also switching locks from flock() to fcntl().
Down the line, we will be introducing single-file segments option,
and we cannot use flock() locks to lock parts of the file. Therefore,
we will use fcntl() locks for legacy mem as well, in case someone is
unfortunate enough to accidentally start legacy mem primary process
alongside an already working non-legacy mem-based primary process.
[1] http://dpdk.org/dev/patchwork/patch/34002/
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Replace the BSD license header with the SPDX tag for files
with only an RehiveTech copyright on them.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Since we have support for the strlcpy function in DPDK, replace all
instances where a string is copied using snprintf.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Add 32b and 64b API's to align the given integer to the previous power
of 2. Update common auto test to include test for previous power of 2 for
both 32 and 64bit integers.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This patch adds support for meter configuration profiles.
Benefits: simplified configuration procedure, improved performance.
Q1: What is the configuration profile and why does it make sense?
A1: The configuration profile represents the set of configuration
parameters for a given meter object, such as the rates and sizes for
the token buckets. The configuration profile concept makes sense when
many meter objects share the same configuration, which is the typical
usage model: thousands of traffic flows are each individually metered
according to just a few service levels (i.e. profiles).
Q2: How is the configuration profile improving the performance?
A2: The performance improvement is achieved by reducing the memory
footprint of a meter object, which results in better cache utilization
for the typical case when large arrays of meter objects are used. The
internal data structures stored for each meter object contain:
a) Constant fields: Low level translation of the configuration
parameters that does not change post-configuration. This is
really duplicated for all meters that use the same
configuration. This is the configuration profile data that is
moved away from the meter object. Current size (implementation
dependent): srTCM = 32 bytes, trTCM = 32 bytes.
b) Variable fields: Time stamps and running counters that change
during the on-going traffic metering process. Current size
(implementation dependent): srTCM = 24 bytes, trTCM = 32 bytes.
Therefore, by moving the constant fields to a separate profile
data structure shared by all the meters with the same
configuration, the size of the meter object is reduced by ~50%.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Get rid of global static ring variable and don't reuse rings
between test runs.
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Fixes: 4e32101f9b ("ring: support freeing")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add a teardown function that frees allocated resources.
Fixes: d0c9b58d71 ("app/test: new reorder unit test")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
The KNI library is not built on FreeBSD, so it needs to be an
optional rather than a mandatory dependency for building the autotest
binary.
Fixes: b5dc795a8a ("test: build app with meson as dpdk-test")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
