The caps API allows application to retrieve capability information
needed to configure the ethernet Rx adapter for the eventdev and
ethdev pair.
For e.g., the ethdev, eventdev pairing maybe such that all of the
ethdev Rx queues can only be connected to a single event queue, in
this case the application is required to pass in -1 as the queue id
when adding a receive queue to the adapter.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit adds the new_event_threshold port attribute, so the entire port
configuration structure passed to rte_event_queue_setup can be queried.
Signed-off-by: Gage Eads <gage.eads@intel.com>
This commit adds three new queue attributes, so that the entire queue
configuration structure passed to rte_event_queue_setup can be queried.
Signed-off-by: Gage Eads <gage.eads@intel.com>
This commit adds an attribute to the eventdev, allowing applications
to retrieve if the eventdev is running or stopped. Note that no API
or ABI changes were required in adding the statistic, and code changes
are minimal.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit adds a generic queue attribute function. It also removes
the previous rte_event_queue_priority() and priority() functions, and
updates the map files and unit tests to use the new attr functions.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit adds a device attribute function, allowing flexible
fetching of device attributes, like port count or queue count.
The unit tests and .map file are updated to the new function.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit reworks the port functions to retrieve information
about the port, like the enq or deq depths. Note that "port count"
is a device attribute, and is added in a later patch for dev attributes.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Events sent through single-link queues are naturally in-order and
atomic, without reordering or atomic scheduling. Logically the
nb_atomic_flows and nb_atomic_order_sequences arguments don't apply to a
single link queue, but applications must set these (depending on the queue
config type) to bypass the is_valid_{ordered, atomic}_queue_conf() checks
in the eventdev layer.
This commit updates those is_valid_* functions to ignore queues with the
SINGLE_LINK flag, to simplify their configuration.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit fixes the check to use the just reallocated
links_map variable, instead of stale dev->data->links_map.
Later the new variable is written to the dev->data->links_map,
so the stale-ness is only temporary.
Coverity issue: 143456
Fixes: 4f0804bbdfb9 ("eventdev: implement the northbound APIs")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Replace the incorrect reference to "Cavium Networks", "Cavium Ltd"
company name with correct the "Cavium, Inc" company name in
copyright headers.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Defining the value 0 as default value for dequeue timeout
will help the application reduce the configuration setup
if the application is interested only in default
timeout value.
removed "min_dequeue_limit" negative testcase as
min_dequeue_limit value could be zero(which is
default timeout now) if driver has
dev_info->min_dequeue_timeout_ns = 1.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Introducing the burst mode capability flag to express the event device
is capable of operating in burst mode for enqueue(forward, release) and
dequeue operation. If the device is not capable, then the application
still uses the rte_event_dequeue_burst() and rte_event_enqueue_burst()
but PMD accepts only one event at a time which is any way transparent
with the current rte_event_*_burst API semantics.
It solves two purposes:
1) Fix performance regression on the PMD which supports only nonburst
mode, and this issue is two-fold.
Typically the burst_worker main loop consists of following pseudo code:
while(1)
{
uint16_t nb_rx = rte_event_dequeue_burst(ev,..);
for (i=0; i < nb_rx; i++) {
process(ev[i]);
if (is_release_required(ev[i]))
release_the_event(ev);
}
uint16_t nb_tx = rte_event_enqueue_burst(dev_id, port_id,
events, nb_rx);
while (nb_tx < nb_rx)
nb_tx += rte_event_enqueue_burst(dev_id, port_id,
events + nb_tx, nb_rx - nb_tx);
}
Typically the non_burst_worker main loop consists of following pseudo code:
while(1)
{
uint16_t nb_rx = rte_event_dequeue_burst(&ev, , 1);
if (!nb_rx)
continue;
process(ev);
while (rte_event_enqueue_burst(dev, port, &ev, 1) != 1);
}
Following overhead has been seen on nonburst mode capable PMDs with
burst mode version
- Extra explicit release(PMD does release on implicitly on next
dequeue) and thus avoids the cost additional driver function overhead.
- Extra "for" loop for event processing which compiler cannot detect at
runtime
2) Simplify the application configuration by avoiding the application to
find the correct enqueue and dequeue depth across different PMD.
If burst mode is not supported then, PMD can ignore depth field.
This will enable to write portable applications and makes
RFC eventdev_pipeline application works on OCTEONTX PMD
http://dpdk.org/dev/patchwork/patch/23799/
If an application wishes to get the maximum performance on nonburst
capable PMD then the application can write the code in a way that by
keeping packet processing function as inline functions and launch the
workers based on the capability.
The generic burst based worker still work on those PMDs without
any code change but this scheme needed only when the application wants
to gets the maximum performance out of nonburst capable PMDs.
This patch is based the on the real world test cases
http://dpdk.org/dev/patchwork/patch/24832/, Where without this scheme
20.9% performance drop observed per core.
See worker_wrapper(), perf_queue_worker(), perf_queue_worker_burst()
functions to use this scheme in a portable way without losing performance
on both sets of PMDs and achieving the portability.
http://dpdk.org/dev/patchwork/patch/24832/
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Made libeventdev library independent of VDEV bus by moving vdev pmd
specific function to rte_eventdev_pmd_vdev.h header file. Eventdev VDEV
PMD can include that for generic eventdev VDEV init and uninit function
enablement.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Made libeventdev library independent of PCI bus by moving pci pmd
specific function to rte_eventdev_pmd_pci.h header file. Eventdev PCI
PMD can include that for generic eventdev PCI probe and remove function
enablement.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Remove rte_event_dev_close() from rte_event_pmd_release() function so
that rte_event_pmd_release() can be used in stateless way. This will
enable rte_event_pmd_vdev_uninit() function to avoid using
eventdev_globals global variable and the need for exposing the a
global variable to PMD.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Remove the PCI dependency from generic data structures
and moved the PCI specific code to rte_event_pmd_pci*
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The PCI code will move to the bus drivers directory.
Rename functions from rte_eal_pci_ to rte_pci_
to prepare the move of the driver out of EAL.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
build error:
.../lib/librte_eventdev/rte_eventdev.c:371:6:
error: logical not is only applied to the left hand side of this
bitwise operator [-Werror,-Wlogical-not-parentheses]
if (!dev_conf->event_dev_cfg & RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT)
^
Added parentheses after the '!' to evaluate the bitwise operator first.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add in APIs for extended stats so that eventdev implementations can report
out information on their internal state. The APIs are based on, but not
identical to, the equivalent ethdev functions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
PMDs that only do a specific type of scheduling cannot provide
CFG_ALL_TYPES, so the Eventdev infrastructure should not demand
that every PMD supports CFG_ALL_TYPES.
By not overriding the default configuration of the queue as
suggested by the PMD, the eventdev_common unit tests can pass
on all PMDs, regardless of their capabilities.
RTE_EVENT_QUEUE_CFG_DEFAULT is no longer used by the eventdev layer
it can be removed now. Applications should use CFG_ALL_TYPES
if they require enqueue of all types a queue, or specify which
type of queue they require.
The CFG_DEFAULT value is changed to CFG_ALL_TYPES in event/skeleton,
to not break the compile.
A capability flag is added that indicates if the underlying PMD
supports creating queues of ALL_TYPES.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
eventdev driver may return error on dequeue timeout tick conversion.
Change the pmd callback interface to address the same.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch initializes the links_map array entries to
EVENT_QUEUE_SERVICE_PRIORITY_INVALID, as expected by
rte_event_port_links_get(). This is necessary for the sw eventdev PMD,
which does not initialize links_map when rte_event_port_setup() calls
rte_event_port_unlink().
Fixes: 4f0804bbdfb9 ("eventdev: implement the northbound APIs")
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
rte_device is a generic device which is available to the applications
and EAL. This patch replaces rte_pci_device in 'struct rte_eventdev'
and in 'struct rte_event_dev_info' with common rte_device.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
On port_setup, the link_map is updated only
for configured number of event queues.
Limit the port_links_get scan only to configured number
of event queues. Also, Limit the port link and unlink queue
validation to configured number of event queues.
Fixes: 4f0804bbdfb9 ("eventdev: implement the northbound APIs")
Reported-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Added eventdev vdev uninit support to release the resources
allocated in eventdev vdev init.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Added a pointer to the rte_eventdev type in the event port
link and unlink callbacks. This device shall be used by some
of the event drivers to fetch queue related information.
Also, update the skeleton eventdev driver with corresponding changes.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch adds infrastructure for registering the vdev or
the PCI based event device.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch implements northbound eventdev API interface using
southbond driver interface
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
