This patch defines new RSS offload types for IPv4 and
L4(TCP/UDP/SCTP) checksum, which are required when users want
to distribute packets based on the IPv4 or L4 checksum field.
For example "flow create 0 ingress pattern eth / ipv4 / end
actions rss types ipv4-chksum end queues end / end", this flow
causes all matching packets to be distributed to queues on
basis of IPv4 checksum.
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Aman Deep Singh <aman.deep.singh@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower case
MAC address, the user may need to make a change in
such test case after this patch.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds multi-process support for testpmd.
For example the following commands run two testpmd
processes:
* the primary process:
./dpdk-testpmd --proc-type=auto -l 0-1 -- -i \
--rxq=4 --txq=4 --num-procs=2 --proc-id=0
* the secondary process:
./dpdk-testpmd --proc-type=auto -l 2-3 -- -i \
--rxq=4 --txq=4 --num-procs=2 --proc-id=1
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Aman Deep Singh <aman.deep.singh@intel.com>
Running with stdout suppressed or redirected for further processing
is very confusing in the case of errors. Fix it by logging errors and
warnings to stderr.
Since lines with log messages are touched anyway concatenate split
format strings to make it easier to search using grep.
Fix indent of format string arguments.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Command help string is missing 'reset' keyword,
although description has it. Adding it.
Fixes: 97f1e196799f ("app/testpmd: add port reset command")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
When we use the following cmd to modify the link speed of specified
port: "port config <port_id> speed xxx duplex xxx", we have to stop
all ports. It's not necessary.
Fixes: 82113036e4e5 ("ethdev: redesign link speed config")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
- Make printf format OS independent
- Replace htons with RTE_BE16
- Replace POSIX specific inet_aton with OS independent inet_pton
- Replace sleep with rte_delay_us_sleep
- Replace random with rte_rand
- #ifndef mman related code for now
- Fix header inclusion
- Include rte_os_shim.h in testpmd.h
- Remove redundant headers
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Passing an uint32_t pointer to an enum pointer parameter causes
pointer-sign warning on Windows (converts between pointers to
integer types with different sign), since enum is implicitly
converted to int on Windows.
And the current enum pointer parameter of that function is actually
misleading and should be fixed as an uint32_t pointer parameter.
Fixes: b19da32e3151 ("app/testpmd: add FEC command")
Cc: stable@dpdk.org
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
This patch adds fwd_config_setup() at the end of cmd_config_dcb_parsed()
to update "cur_fwd_config", so that the actual forwarding streams can be
queried by the "show config fwd" cmd.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Currently, '.get_dcb_info' must be supported for the port doing DCB
test, or all information in 'rte_eth_dcb_info' are zero. It should be
prevented when user run cmd "port config 0 dcb vt off 4 pfc off".
This patch adds the check for support of reporting dcb info.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Variable total, which may be zero and result in segmentation fault.
This patch fixed it.
Fixes: 9b1249d9ff69 ("app/testpmd: support dumping socket memory")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The --txpkts command line parameter was silently ignored due to
application was unable to check the Tx queue ring sizes for non
configured ports.
The "set txpkts <len0[,len1]*>" was also rejected if there
was some stopped or /unconfigured port.
This provides the following:
- If fails to get ring size from the port, this can be because port is
not initialized yet, ignore the check and just be sure segment size
won't cause an out of bound access. The port descriptor check will
be done during Tx setup.
- The capability to send single packet is supposed to be very basic
and always supported, the setting segment number to 1 is always
allowed, no check performed
- At the moment of Tx queue setup the descriptor number is checked
against configured segment number
Bugzilla ID: 584
Fixes: 8dae835d88b7 ("app/testpmd: remove restriction on Tx segments set")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
When txq offload is configured, max rxq is used as the max queue. This
patch fixes it.
Fixes: 74453ac9ef67 ("app/testpmd: fix queue offload configuration")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch supports the query of the link flow control parameter
on a port.
The command format is as follows:
show port <port_id> flow_ctrl
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Add the create/del policy CLIs to support actions per color.
The CLIs are:
Create: add port meter policy (port_id) (policy_id) g_actions (actions)
y_actions (actions) r_actions (actions)
Delete: del port meter policy (port_id) (policy_id)
Examples:
testpmd> add port meter policy 0 1 g_actions rss / end y_actions end
r_actions drop / end
testpmd> del port meter policy 0 1
Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently, the flow meter policy does not support multiple actions
per color; also the allowed action types per color are very limited.
In addition, the policy cannot be pre-defined.
Due to the growing in flow actions offload abilities there is a potential
for the user to use variety of actions per color differently.
This new meter policy API comes to allow this potential in the most ethdev
common way using rte_flow action definition.
A list of rte_flow actions will be provided by the user per color
in order to create a meter policy.
In addition, the API forces to pre-define the policy before
the meters creation in order to allow sharing of single policy
with multiple meters efficiently.
meter_policy_id is added into struct rte_mtr_params.
So that it can get the policy during the meters creation.
Allow coloring the packet using a new rte_flow_action_color
as could be done by the old policy API.
Add two common policy template as macros in the head file.
The next API function were added:
- rte_mtr_meter_policy_add
- rte_mtr_meter_policy_delete
- rte_mtr_meter_policy_update
- rte_mtr_meter_policy_validate
The next struct was changed:
- rte_mtr_params
- rte_mtr_capabilities
The next API was deleted:
- rte_mtr_policer_actions_update
To support this API the following app were changed:
app/test-flow-perf: clean meter policer
app/testpmd: clean meter policer
To support this API the following drivers were changed:
net/softnic: support meter policy API
1. Cleans meter rte_mtr_policer_action.
2. Supports policy API to get color action as policer action did.
The color action will be mapped into rte_table_action_policer.
net/mlx5: clean meter creation management
Cleans and breaks part of the current meter management
in order to allow better design with policy API.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The command line for testing connection tracking is added. To create
a conntrack object, 3 parts are needed.
set conntrack com peer ...
set conntrack orig scale ...
set conntrack rply scale ...
This will create a full conntrack action structure for the indirect
action. After the indirect action handle of "conntrack" created, it
could be used in the flow creation. Before updating, the same
structure is also needed together with the update command
"conntrack_update" to update the "dir" or "ctx".
After the flow with conntrack action created, the packet should jump
to the next flow for the result checking with conntrack item. The
state is defined with bits and a valid combination could be
supported.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Right now, rte_flow_shared_action_* APIs are used for some shared
actions, like RSS, count. The shared action should be created before
using it inside a flow. These shared actions sometimes are not
really shared but just some indirect actions decoupled from a flow.
The new functions rte_flow_action_handle_* are added to replace
the current shared functions rte_flow_shared_action_*.
There are two types of flow actions:
1. the direct (normal) actions that could be created and stored
within a flow rule. Such action is tied to its flow rule and
cannot be reused.
2. the indirect action, in the past, named shared_action. It is
created from a direct actioni, like count or rss, and then used
in the flow rules with an object handle. The PMD will take care
of the retrieve from indirect action to the direct action
when it is referenced.
The indirect action is accessed (update / query) w/o any flow rule,
just via the action object handle. For example, when querying or
resetting a counter, it could be done out of any flow using this
counter, but only the handle of the counter action object is
required.
The indirect action object could be shared by different flows or
used by a single flow, depending on the direct action type and
the real-life requirements.
The handle of an indirect action object is opaque and defined in
each driver and possibly different per direct action type.
The old name "shared" is improper in a sense and should be replaced.
Since the APIs are changed from "rte_flow_shared_action*" to the new
"rte_flow_action_handle*", the testpmd application code and command
line interfaces also need to be updated to do the adaption.
The testpmd application user guide is also updated. All the "shared
action" related parts are replaced with "indirect action" to have a
correct explanation.
The parameter of "update" interface is also changed. A general
pointer will replace the rte_flow_action struct pointer due to the
facts:
1. Some action may not support fields updating. In the example of a
counter, the only "update" supported should be the reset. So
passing a rte_flow_action struct pointer is meaningless and
there is even no such corresponding action struct. What's more,
if more than one operations should be supported, for some other
action, such pointer parameter may not meet the need.
2. Some action may need conditional or partial update, the current
parameter will not provide the ability to indicate which part(s)
to update.
For different types of indirect action objects, the pointer could
either be the same of rte_flow_action* struct - in order not to
break the current driver implementation, or some wrapper
structures with bits as masks to indicate which part to be
updated, depending on real needs of the corresponding direct
action. For different direct actions, the structures of indirect
action objects updating will be different.
All the underlayer PMD callbacks will be moved to these new APIs.
The RTE_FLOW_ACTION_TYPE_SHARED is kept for now in order not to
break the ABI. All the implementations are changed by using
RTE_FLOW_ACTION_TYPE_INDIRECT.
Since the APIs are changed from "rte_flow_shared_action*" to the new
"rte_flow_action_handle*" and the "update" interface's 3rd input
parameter is changed to generic pointer, the mlx5 PMD that uses these
APIs needs to do the adaption to the new APIs as well.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Currently, when the user sets force link speed through 'link_speeds',
bit(0) of 'link_speeds' is not set to 1(ETH_LINK_SPEED_FIXED),
which conflicts with the definition.
Fixes: 88fbedcd5e5a ("app/testpmd: move speed and duplex parsing in a function")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
add meter profile packet_mode to the ethernet device.
One example:
add port meter profile rfc2697 (port_id) (profile_id)
(cir) (cbs) (ebs) (packet_mode)
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds more err info for Tx/Rx descriptor query command.
Fixes: fae9aa717d6c ("app/testpmd: support checking descriptor status")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
cmd_tunnel_udp_config checked 'cmd' to set prot_type but this cmd is
only for rx_vxlan_port. The unnecessary cmd check will cause uninit
coverity issue. So remove it and rename 'cmd' to 'rx_vxlan_port'.
Coverity issue: 366155
Fixes: bd948f20d609 ("app/testpmd: VXLAN packet identification")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
"show port cap all|<port_id>" was to display offload configuration of
port(s).
But later two other commands added to show same information in more
accurate way:
show port (port_id) rx_offload configuration
show port (port_id) tx_offload configuration
These new commands can both show port and queue level configuration,
also with their capabilities counterparts easier to see offload
capability and configuration of the port in similar syntax.
So the functionality is duplicated and removing this version, to favor
the new commands.
Another problem with this command is it requires each new offload to be
added into the function to display them, and there were missing offloads
that are not displayed, this requirement for sure will create gaps by
time as new offloads added.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Add support for displaying the count of used (filled by hardware
but not yet processed by the driver) descriptors on a receive
queue in order to allow the rte_eth_dev rx_queue_count() API to
be exercised and tested.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
There is the "set rxpkts" command in the testpmd interactive mode,
it configures the segment sizes to split the packet on receiving.
The mentioned segment sizes are provided on the Rx queue setup
as part of queue configuration. Hence, to take the rxpkts command
into effect the Rx queues must be explicitly reconfigured.
The explained above is related to the "set rxoffs" as well.
The patch sets the queue reconfiguration request flag for
all devices once Rx split settings are updated, to take
the changes into effect the port(s) should be restarted.
Fixes: 0f2096d7ab36 ("app/testpmd: add rxpkts commands and parameters")
Fixes: 91c78e090eed ("app/testpmd: add rxoffs commands and parameters")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In interactive mode, if testpmd exit by calling rte_exit without
restore terminal attributes, terminal will not echo keyboard input.
register a function with atexit() in prompt(), when exit() in
rte_exit() is called, the registered function restores terminal
attributes.
Fixes: 5a8fb55c48ab ("app/testpmd: support unidirectional configuration")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
"port config all max-pkt-len" command fails because it doesn't set the
'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag properly.
Commit in the fixes line moved the 'DEV_RX_OFFLOAD_JUMBO_FRAME' offload
flag update from 'cmd_config_max_pkt_len_parsed()' to 'init_config()'.
'init_config()' function is only called during testpmd startup, but the
flag status needs to be calculated whenever 'max_rx_pkt_len' changes.
The issue can be reproduced as [1], where the 'max-pkt-len' reduced and
'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag should be cleared but it
didn't.
Adding the 'update_jumbo_frame_offload()' helper function to update
'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag and 'max_rx_pkt_len'. This
function is called both by 'init_config()' and
'cmd_config_max_pkt_len_parsed()'.
Default 'max-pkt-len' value set to zero, 'update_jumbo_frame_offload()'
updates it to "RTE_ETHER_MTU + PMD specific Ethernet overhead" when it
is zero.
If '--max-pkt-len=N' argument provided, it will be used instead.
And with each "port config all max-pkt-len" command, the
'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag, 'max-pkt-len' and MTU is
updated.
[1]
--------------------------------------------------------------------------
dpdk-testpmd -c 0xf -n 4 -- -i --max-pkt-len=9000 --tx-offloads=0x8000
--rxq=4 --txq=4 --disable-rss
testpmd> set verbose 3
testpmd> port stop all
testpmd> port config all max-pkt-len 1518
testpmd> port start all
// Got fail error info without this patch
Configuring Port 0 (socket 1)
Ethdev port_id=0 rx_queue_id=0, new added offloads 0x800 must be
within per-queue offload capabilities 0x0 in rte_eth_rx_queue_setup()
Fail to configure port 0 rx queues //<-- Fail error info;
--------------------------------------------------------------------------
Bugzilla ID: 625
Fixes: 761c4d66900f ("app/testpmd: fix max Rx packet length for VLAN packets")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Tested-by: Bo Chen <box.c.chen@intel.com>
This patch defines new RSS offload types for MPLS. The distribution
will on the basis of MPLS tag.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When the max rx packet length is smaller than the sum of mtu size and
ether overhead size, it should be enlarged, otherwise the VLAN packets
will be dropped.
Removed the rx_offloads assignment for jumbo frame during command line
parsing, and set the correct jumbo frame flag if MTU size is larger than
the default value 'RTE_ETHER_MTU' within 'init_config()'.
Fixes: 384161e00627 ("app/testpmd: adjust on the fly VLAN configuration")
Fixes: 35b2d13fd6fd ("net: add rte prefix to ether defines")
Fixes: ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
Fixes: 150c9ac2df13 ("app/testpmd: update Rx offload after setting MTU")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Request the driver for number of entries in the FEC caps
array and then dynamically allocate the array.
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new UDP tunnel port params for eCPRI configuration, the command
as below:
testpmd> port config 0 udp_tunnel_port add ecpri 6789
testpmd> port config 0 udp_tunnel_port rm ecpri 6789
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, the queue stats mapping has the following problems:
1) Many PMD drivers don't support queue stats mapping. But there is no
failure message after executing the command "set stat_qmap rx 0 2 2".
2) Once queue mapping is set, unrelated and unmapped queues are also
displayed.
3) The configuration result does not take effect or can not be queried
in real time.
4) The mapping arrays, "tx_queue_stats_mappings_array" &
"rx_queue_stats_mappings_array" are global and their sizes are based
on fixed max port and queue size assumptions.
5) These record structures, 'map_port_queue_stats_mapping_registers()'
and its sub functions are redundant for majority of drivers.
6) The display of the queue stats and queue stats mapping is mixed
together.
Since xstats is used to obtain queue statistics, we have made the
following simplifications and adjustments:
1) If PMD requires and supports queue stats mapping, configure to driver
in real time by calling ethdev API after executing the command "set
stat_qmap rx/tx ...". If not, the command can not be accepted.
2) Based on the above adjustments, these record structures,
'map_port_queue_stats_mapping_registers()' and its sub functions can
be removed. "tx-queue-stats-mapping" & "rx-queue-stats-mapping"
parameters, and 'parse_queue_stats_mapping_config()' can be removed
too.
3) remove display of queue stats mapping in 'fwd_stats_display()' &
'nic_stats_display()', and obtain queue stats by xstats. Since the
record structures are removed, 'nic_stats_mapping_display()' can be
deleted.
Fixes: 4dccdc789bf4 ("app/testpmd: simplify handling of stats mappings error")
Fixes: 013af9b6b64f ("app/testpmd: various updates")
Fixes: ed30d9b691b2 ("app/testpmd: add stats per queue")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
If there was no RTE_NET_I40E configured the static routine
str2flowtype() was not used causing compilation warning.
The str2flowtype() is moved under #ifdef RTE_NET_I40E block.
Fixes: 1be514fbcea9 ("ethdev: remove legacy FDIR filter type support")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch defines new RSS offload types for eCPRI. For eCPRI with
Message Type 0, the hash field is physical channel ID.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
cmdline_numtype member names clash with Windows system identifiers.
Add RTE_ prefix to cmdline constants to avoid this and possible
future conflicts.
Suggested-by: Ranjit Menon <ranjit.menon@intel.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Jie Zhou <jizh@microsoft.com>
Tested-by: Jie Zhou <jizh@microsoft.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The command uses FDIR filter information get API which
is not supported any more.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of FDIR filters RTE flow API should be used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Global filter configuration request was supported by net/i40e
driver only to configure GRE key length.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of L2 tunnel filter RTE flow API should be used.
Preserve RTE_ETH_FILTER_L2_TUNNEL since it is used in drivers
internally in RTE flow API support.
rte_eth_l2_tunnel_conf structure is used in other ethdev API
functions.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of HASH filter RTE flow API should be used.
Preserve RTE_ETH_FILTER_HASH since it is used in drivers
internally in RTE flow API support.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of TUNNEL filter RTE flow API should be used.
Move corresponding defines and helper structure to ethdev
driver interface since it is still used by drivers internally.
Preserve RTE_ETH_FILTER_TUNNEL because of usage in drivers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of N-tuple filter RTE flow API should be used.
Preserve struct rte_eth_ntuple_filter in ethdev API since
the structure and related defines are used in flow classify
library and a number of drivers.
Preserve RTE_ETH_FILTER_NTUPLE because of usage in drivers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of SYN filter RTE flow API should be used.
Move corresponding definitions to ethdev internal driver API
since it is used by drivers internally.
Preserve RTE_ETH_FILTER_SYN because of it as well.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of FLEXIBLE filter RTE flow API should be used.
Temporarily preserve helper defines in public interface.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of EtherType filter RTE flow API should be used.
Move corresponding definitions to ethdev internal driver API
since it is used by drivers internally.
Preserve RTE_ETH_FILTER_ETHERTYPE because of it as well.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
