This new rte_vhost_va_from_guest_pa API takes an extra len
parameter, used to specify the size of the range to be mapped.
Effective mapped range is returned via len parameter.
This issue has been assigned CVE-2018-1059.
Reported-by: Yongji Xie <xieyongji@baidu.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch adds public API implementation to vhost crypto.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch adds APIs to enable live migration for non-builtin data paths.
At src side, last_avail/used_idx from the device need to be set into the
virtio_net structure, and the log_base and log_size from the virtio_net
structure need to be set into the device.
At dst side, last_avail/used_idx need to be read from the virtio_net
structure and set into the device.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch adapts vhost lib for selective datapath by calling device ops
at the corresponding stage.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch adds APIs for datapath configuration.
The did of the vhost-user socket can be set to identify the backend device,
in this case each vhost-user socket can have only 1 connection. The did is
set to -1 by default when the software datapath is used.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch set introduces support for selective datapath in DPDK vhost-user
lib. vDPA stands for vhost Data Path Acceleration. The idea is to support
virtio ring compatible devices to serve virtio driver directly to enable
datapath acceleration.
A set of device ops is defined for device specific operations:
a. get_queue_num: Called to get supported queue number of the device.
b. get_features: Called to get supported features of the device.
c. get_protocol_features: Called to get supported protocol features of
the device.
d. dev_conf: Called to configure the actual device when the virtio
device becomes ready.
e. dev_close: Called to close the actual device when the virtio device
is stopped.
f. set_vring_state: Called to change the state of the vring in the
actual device when vring state changes.
g. set_features: Called to set the negotiated features to device.
h. migration_done: Called to allow the device to response to RARP
sending.
i. get_vfio_group_fd: Called to get the VFIO group fd of the device.
j. get_vfio_device_fd: Called to get the VFIO device fd of the device.
k. get_notify_area: Called to get the notify area info of the queue.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Users of librte_vhost currently implement the vring call operation
themselves. Each caller performs the operation slightly differently.
This patch introduces a new librte_vhost API called
rte_vhost_vring_call() that performs the operation so that vhost-user
applications don't have to duplicate it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
This patch implements the ops rx_queue_count for vhost PMD by adding
a helper function rte_vhost_rx_queue_count in vhost lib.
The ops rx_queue_count gets vhost RX queue avail count and helps to
understand the queue fill level.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
We used to use rte_vhost_driver_session_start() to trigger the vhost-user
session. It takes no argument, thus it's a global trigger. And it could
be problematic.
The issue is, currently, rte_vhost_driver_register(path, flags) actually
tries to put it into the session loop (by fdset_add). However, it needs
a set of APIs to set a vhost-user driver properly:
* rte_vhost_driver_register(path, flags);
* rte_vhost_driver_set_features(path, features);
* rte_vhost_driver_callback_register(path, vhost_device_ops);
If a new vhost-user driver is registered after the trigger (think OVS-DPDK
that could add a port dynamically from cmdline), the current code will
effectively starts the session for the new driver just after the first
API rte_vhost_driver_register() is invoked, leaving later calls taking
no effect at all.
To handle the case properly, this patch introduce a new API,
rte_vhost_driver_start(path), to trigger a specific vhost-user driver.
To do that, the rte_vhost_driver_register(path, flags) is simplified
to create the socket only and let rte_vhost_driver_start(path) to
actually put it into the session loop.
Meanwhile, the rte_vhost_driver_session_start is removed: we could hide
the session thread internally (create the thread if it has not been
created). This would also simplify the application.
NOTE: the API order in prog guide is slightly adjusted for showing the
correct invoke order.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Export few APIs for the vhost-user driver to log the guest memory writes,
which is a must for live migration support.
This patch basically moves vhost_log_write() and vhost_log_used_vring()
into vhost.h and then add an wrapper (the public API) to them.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We used to use rte_vhost_get_queue_num() for telling how many vrings.
However, the return value is the number of "queue pairs", which is
very virtio-net specific. To make it generic, we should return the
number of vrings instead, and let the driver do the proper translation.
Say, virtio-net driver could turn it to the number of queue pairs by
dividing 2.
Meanwhile, mark rte_vhost_get_queue_num as deprecated.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Some vhost-user driver may need this info to setup its own page tables
for GPA (guest physical addr) to HPA (host physical addr) translation.
SPDK (Storage Performance Development Kit) is one example.
Besides, by exporting this memory info, we could also export the
gpa_to_vva() as an inline function, which helps for performance.
Otherwise, it has to be referenced indirectly by a "vid".
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Introduce few APIs to set/get/enable/disable driver features.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch implements the function for the application to
get the MTU value.
rte_vhost_get_mtu() fills the mtu parameter with the MTU value
set in QEMU if VIRTIO_NET_F_MTU has been negotiated and returns 0,
-ENOTSUP otherwise.
The function returns -EAGAIN if Virtio feature negotiation
didn't happened yet.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The new API rte_vhost_avail_entries() is actually a rename of
rte_vring_available_entries(), with the "vring" to "vhost" name
change to keep the consistency of other vhost exported APIs.
This change could let us avoid the dependency of "virtio_net"
struct, to prepare for the ABI refactoring.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
Introduce a new API rte_vhost_get_ifname() to export the ifname to
application.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
Introduce a new API rte_vhost_get_queue_num() to export the number of
queues.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
Introduce a new API rte_vhost_get_numa_node() to get the numa node
from which the virtio_net struct is allocated.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
rte_vhost_driver_unregister API will remove the listenfd from event list,
and then close it.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Signed-off-by: Peng Sun <peng.a.sun@intel.com>
Add linker version script files to each DPDK library to put a stake in the
ground from which we can start cleaning up API's
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
