The set key functions are added in roc to be used
in crypto operations.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add code that can be leveraged across
lookaside and inline IPsec on cn10k.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
EC group static vectors are required for CPT asymmetric
crypto operations.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add scalar FPM tables to be used for asymmetric crypto
operations.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add routine to initialize LMTLINE which facilitates instruction
submission to CPT. Add common macros required in the enqueue
operations.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Microcode AE opcodes support asymmetric operations. Add defines
and structs defined by microcode.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Microcode SE opcodes support symmetric operations. Add defines
and structs defined by microcode.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add CPT hardware definitions. CPT is the hardware block on
cnxk family of processors, that can be used to offload
cryptographic operations.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Since the offload values are always the same, these can
just be data instead of code.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Since these always return 0, they were doing nothing useful.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Remove queue stats from basic stats because they're now available
via xstats API. Also remove RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS flag.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Replacing memcpy() with rte_memcpy() improved 64 byte packet
performance by 33% on a POWER9 system and by 10% on an x86_64
system.
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
In a multi-TC scenario, if the length of packets destined for different
TCs is different, for example, 64B and 1500B packets destined for TC0 and
TC1 respectively. There is a problem that the bandwidth of the TC to which
large packets are sent is preempted by the TC to which small packets are
sent on the Kunpeng 920 network engine. As a result, the TC bandwidth
accuracy is inaccurate.
To solve this problem, this patch made the following adjustments:
1/ During initialization, firmware reports the capability bit indicating
whether the TM function is supported.
2/ The command word for configuring TC and port rate limiting is added,
instead of reusing the existing command word. And firmware configured
to the correct module.
3/ When the PF driver is loaded, firmware completes the default
initialization of the TC and port.
Fixes: c09c7847d8 ("net/hns3: support traffic management")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch creates a new function for handling PF probing of a secondary
process. A CPP handle is obtained for the CPP bridge service and the
service itself is also registered during secondary process
initialization. DPDK services aren't shared between processes so it is
not enough to only have the primary register the service if it is also
needed in a secondary process. This implies that both the primary and
secondary will have their own copy of the bridge service.
Fixes: 5e15e799d6 ("net/nfp: create separate entity for PF device")
Cc: stable@dpdk.org
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
When using rte_eth_dev_pci_generic_probe() during probing a
rte_eth_dev will be created with the name field corresponding to the PCI
address of the device. NFP4000/6000 devices only have a single PF (but
potentially multiple physical ports). This means that in a simple two
port example the rte_eth_devices[] array will be populated with two
devices: 0000:02:00.0 and 0000:02:00.0_port1. This is inconsistent and
not ideal. It will also cause issues when a secondary process tries to
attach to these ports.
This patch removes the use of rte_eth_dev_pci_generic_probe() and
allocates eth_dev's for each physical port during PF initialization,
giving them more consistent names.
Fixes: 5e15e799d6 ("net/nfp: create separate entity for PF device")
Cc: stable@dpdk.org
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Since commit d5df2ae042 ("net: fix unneeded replacement of TCP
checksum 0"), the functions rte_ipv4_udptcp_cksum() and
rte_ipv6_udptcp_cksum() can return either 0x0000 or 0xffff when used to
verify a packet containing a valid checksum.
Since these functions should be used to calculate the checksum to set in
a packet, introduce 2 new helpers for checksum verification. They return
0 if the checksum is valid in the packet.
Use this new helper in net/tap driver.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Since commit d5df2ae042 ("net: fix unneeded replacement of TCP
checksum 0"), the functions rte_ipv4_udptcp_cksum() or
rte_ipv6_udptcp_cksum() can return either 0x0000 or 0xffff when used to
verify a packet containing a valid checksum.
This new behavior broke the checksum verification in tap driver for TCP
packets: these packets are marked with PKT_RX_L4_CKSUM_BAD.
Fix this by checking the 2 possible values. A next commit will introduce
a checksum verification helper to simplify this a bit.
Fixes: d5df2ae042 ("net: fix unneeded replacement of TCP checksum 0")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
When packet type is IPV4_EXT, the checksum is always marked as good in
the mbuf offload flags.
Since we know the header lengths, we can easily call
rte_ipv4_udptcp_cksum() in this case too.
Fixes: 8ae3023387 ("net/tap: add Rx/Tx checksum offload support")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Chelsio T6 ASIC doesn't track Rx promisc traffic dropped due to lack
of Rx buffers and hence the imissed counter doesn't increment. Add
support for RAW MAC filter to insert a wildcard matchall rule at
the end of MPS TCAM to make MPS track the promisc traffic. This
rule will only be added/removed when promisc mode is turned on/off
on the interface.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Do not return "GOOD" flag if the status was bad.
Fixes: 9e6e7f479a ("net/sfc: support Rx checksum offload for EF100")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
ethdev library does the check of dev before calling the link update.
Fixes: acd4818ea2 ("net/pfe: add link status update")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Acked-by: Gagandeep Singh <g.singh@nxp.com>
Kunpeng 930 support Tx push mode which could improve performance.
It works like below:
1. Add PCIe bar45 which support driver direct write the Tx descriptor
or tail reg to it.
2. Support three operations: a) direct write one Tx descriptor, b)
direct write two Tx descriptors, c) direct write tail reg.
3. The original tail reg located at bar23, the above bar45 tail reg
could provide better bandwidth from the hardware perspective.
The hns3 driver only support direct write tail reg (also have the name
of quick doorbell), the detail:
Considering compatibility, firmware will report Tx push capa if the
hardware support it.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Delete redundant blank lines to make:
1.Return value judgment follow the function call.
2.No blank lines at the end of a code block defined by braces.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The "cfg_max_queues" maintains configured max queue numbers from user,
and is equal to the maximum of "nb_rx_queues" and "nb_tx_queues" in
"dev->data".
From the ethdev layer framework, "nb_rx/tx_queues" in "dev->data" were set
to zero in rte_eth_dev_configure() if ops.dev_configure in PMD fails to be
executed, In addition, if ops.dev_configure in HNS3 PMD failed, the fake
queues are also cleared on a device that does not support independent Rx/Tx
queues.
Therefore, the "cfg_max_queues" should be also set to zero when
dev_configure fails.
Fixes: fa29fe45a7 ("net/hns3: support queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
When the current VLAN stripping is set, the log print always prompts
that the enabling fails, bug if may actually be the disabling failure.
Fixes: 411d23b9ea ("net/hns3: support VLAN")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
When the device supports independent Rx/Tx queues, fake queues do not need
to be created in unequal Rx/Tx queues case. However, dev_configure fails
to be executed on the device supported independent Rx/Tx queues, the
current rollback code logic contains the fake queue. As a result, the fake
queue is created. When dev_configure is successfully called again, these
fake queues still exists and are configured to the hardware.
Fixes: fa29fe45a7 ("net/hns3: support queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
When the primary process executes dev_stop or is being reset, the packet
sending and receiving functions is changed. In this moment, the primary
process requests secondary processes to change their Rx/Tx functions, and
delays a period of time in case of crashes when queues are still in use.
The delay time depends on the number of queues actually used, instead of
the maximum number of queues supported by the device.
Fixes: 23d4b61fee ("net/hns3: support multiple process")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
When the device is very busy, VF reset may have to be
retried many times to succeed, leading to the current
max reset fail retry count not enough.
Modify max reset fail retry count to 30 to enhance
the reliability of reset function.
Fixes: 2790c64647 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
