Make the compiler switch name and document name consistent as ``ifc`` to
avoid confusion. Also rename the map file to standard name for meson
build in the process.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Introduce rte_bpf_elf_load() function to provide ability to
load eBPF program from ELF object file.
It also adds dependency on libelf.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
librte_bpf provides a framework to load and execute eBPF bytecode
inside user-space dpdk based applications.
It supports basic set of features from eBPF spec
(https://www.kernel.org/doc/Documentation/networking/filter.txt).
Not currently supported features:
- JIT
- cBPF
- tail-pointer call
- eBPF MAP
- skb
- function calls for 32-bit apps
- mbuf pointer as input parameter for 32-bit apps
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Defined FPGA-BUS for Acceleration Drivers of AFUs
1. FPGA PCI Scan (1st Scan) follows DPDK UIO/VFIO PCI Scan Process,
probe Intel FPGA Rawdev Driver, it will be covered in following patches.
2. AFU Scan(2nd Scan) bind DPDK driver to FPGA Partial-Bitstream.
This scan is trigged by hotplug of IFPGA Rawdev probe, in this scan
the AFUs will be created and their drivers are also probed.
This patch will introduce rte_afu_device which describe the AFU device
listed in the FPGA-BUS.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Adding basic skeleton of the ISA-L compression driver.
No compression functionality, but lays the foundation for
operations in the rest of the patchset.
The ISA-L compression driver utilizes Intel's ISA-L compression
library and compressdev API.
Signed-off-by: Lee Daly <lee.daly@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add basic functions to manage compress devices,
including driver and device allocation, and the basic
interface with compressdev PMDs.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Picking a company stock ticker for a PMD name might not be a best approach
in a long run since name is too generic.
This patch addresses that and renames mrvl to mvsam.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
DPAA2 QDMA driver uses MC DPDMAI object. This driver enables
the user (app) to perform data DMA without involving CPU in
the DMA process
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The IFCVF vDPA (vhost data path acceleration) driver provides support for
the Intel FPGA 100G VF (IFCVF). IFCVF's datapath is virtio ring compatible,
it works as a HW vhost backend which can send/receive packets to/from
virtio directly by DMA.
Different VF devices serve different virtio frontends which are in
different VMs, so each VF needs to have its own DMA address translation
service. During the driver probe a new container is created, with this
container vDPA driver can program DMA remapping table with the VM's memory
region information.
Key vDPA driver ops implemented:
- ifcvf_dev_config:
Enable VF data path with virtio information provided by vhost lib,
including IOMMU programming to enable VF DMA to VM's memory, VFIO
interrupt setup to route HW interrupt to virtio driver, create notify
relay thread to translate virtio driver's kick to a MMIO write onto HW,
HW queues configuration.
- ifcvf_dev_close:
Revoke all the setup in ifcvf_dev_config.
Live migration feature is supported by IFCVF and this driver enables
it. For the dirty page logging, VF helps to log for packet buffer write,
driver helps to make the used ring as dirty when device stops.
Because vDPA driver needs to set up MSI-X vector to interrupt the
guest, only vfio-pci is supported currently.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The manager provides a way to allocate physically and virtually
contiguous set of objects.
Signed-off-by: Artem V. Andreev <artem.andreev@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The virtio crypto device is a virtual cryptography device
as well as a kind of virtual hardware accelerator for
virtual machines. The linux kernel virtio-crypto driver
has been merged, and this patch introduces virtio crypto
PMD to achieve better performance.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Fan Zhang <roy.fan.zhang@intel.com>
Adds support for the v0.49 of the IPsec Multi-buffer lib,
which now gets compiled and installed as a shared object.
Therefore, there is no need to pass the AESNI_MULTI_BUFFER_LIB_PATH
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adds support for the v0.49 of the IPsec Multi-buffer lib,
which now gets compiled and installed as a shared object.
Therefore, there is no need to pass the AESNI_MULTI_BUFFER_LIB_PATH
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The introduction of the event timer adapter library adds a dependency
on the rte_timer library from the rte_eventdev library. Update the
order so that the timer library comes after the eventdev library in the
linker command when statically linking applications.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Move commonly used functions across mempool, event and net devices to a
common folder in drivers.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The strncpy function is error prone for doing "safe" string copies, so
we generally try to use "snprintf" instead in the code. The function
"strlcpy" is a better alternative, since it better conveys the
intention of the programmer, and doesn't suffer from the non-null
terminating behaviour of it's n'ed brethern.
The downside of this function is that it is not available by default
on linux, though standard in the BSD's. It is available on most
distros by installing "libbsd" package.
This patch therefore provides the following in rte_string_fns.h to ensure
that strlcpy is available there:
* for BSD, include string.h as normal
* if RTE_USE_LIBBSD is set, include <bsd/string.h>
* if not set, fallback to snprintf for strlcpy
Using make build system, the RTE_USE_LIBBSD is a hard-coded value to "n",
but when using meson, it's automatically set based on what is available
on the platform.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The name "mrvl" for Marvell PMD driver for PPv2 Marvell PPv2
(Packet Processor v2) 1/10 Gbps adapter is too generic and causes
problem for adding new PMD drivers for other Marvell devices.
Changed to "mvpp2" for specific Marvell PPv2 PMD.
This patch doesn't introduce any change except renaming.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch fixes the build dependency of various
dpaaX components, when the dpaa or fslmc bus is disabled,
or VFIO is disabled.
Fixes: 1ee9569576 ("config: enable dpaaX drivers for generic ARMv8")
Cc: stable@dpdk.org
Reported-by: Yongseok Koh <yskoh@mellanox.com>
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When mlx5 is not compiled directly as an independent shared object (e.g.
CONFIG_RTE_BUILD_SHARED_LIB not enabled for performance reasons), DPDK
applications inherit its dependencies on libibverbs and libmlx5 through
rte.app.mk.
This is an issue both when DPDK is delivered as a binary package (Linux
distributions) and for end users because rdma-core then propagates as a
mandatory dependency for everything.
Application writers relying on binary DPDK packages are not necessarily
aware of this fact and may end up delivering packages with broken
dependencies.
This patch therefore introduces an intermediate internal plug-in
hard-linked with rdma-core (to preserve symbol versioning) loaded by the
PMD through dlopen(), so that a missing rdma-core does not cause unresolved
symbols, allowing applications to start normally.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When mlx4 is not compiled directly as an independent shared object (e.g.
CONFIG_RTE_BUILD_SHARED_LIB not enabled for performance reasons), DPDK
applications inherit its dependencies on libibverbs and libmlx4 through
rte.app.mk.
This is an issue both when DPDK is delivered as a binary package (Linux
distributions) and for end users because rdma-core then propagates as a
mandatory dependency for everything.
Application writers relying on binary DPDK packages are not necessarily
aware of this fact and may end up delivering packages with broken
dependencies.
This patch therefore introduces an intermediate internal plug-in
hard-linked with rdma-core (to preserve symbol versioning) loaded by the
PMD through dlopen(), so that a missing rdma-core does not cause unresolved
symbols, allowing applications to start normally.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Skeleton rawdevice driver, on the lines of eventdev skeleton, is for
showcasing the rawdev library. This driver implements some of the
operations of the library based on which a test module can be
developed.
Design of skeleton involves a virtual device which is plugged into
VDEV bus on initialization.
Also, enable compilation of rawdev skeleton driver.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Each device in DPDK has a type associated with it - ethernet, crypto,
event etc. This patch introduces 'rawdevice' which is a generic
type of device, not currently handled out-of-the-box by DPDK.
A device which can be scanned on an installed bus (pci, fslmc, ...)
or instantiated through devargs, can be interfaced using
standardized APIs just like other standardized devices.
This library introduces an API set which can be plugged on the
northbound side to the application layer, and on the southbound side
to the driver layer.
The APIs of rawdev library exposes some generic operations which can
enable configuration and I/O with the raw devices. Using opaque
data (pointer) as API arguments, library allows a high flexibility
for application and driver implementation.
This patch introduces basic device operations like start, stop, reset,
queue and info support.
Subsequent patches would introduce other operations like buffer
enqueue/dequeue and firmware support.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This patch lays the groundwork for this driver (draft documentation,
copyright notices, code base skeleton and build system hooks). While it can
be successfully compiled and invoked, it's an empty shell at this stage.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
OPDL ring is the core infrastructure of OPDL PMD. OPDL ring library
provide the core data structure and core helper function set. The Ring
implements a single ring multi-port/stage pipelined packet distribution
mechanism. This mechanism has the following characteristics:
• No multiple queue cost, therefore, latency is significant reduced.
• Fixed dependencies between queue/ports is more suitable for complex.
fixed pipelines of stateless packet processing (static pipeline).
• Has decentralized distribution (no scheduling core).
• Packets remain in order (no reorder core(s)).
* Update build system to enable compilation.
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Signed-off-by: Peter Mccarthy <peter.mccarthy@intel.com>
Reviewed-by: Seán Harte <seanbh@gmail.com>
- bbdev 'turbo_sw' is the software accelerated version of 3GPP L1
Turbo coding operation using the optimized Intel FlexRAN SDK libraries.
- 'turbo_sw' pmd is disabled by default
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
- 'bbdev_null' is a basic pmd that performs a minimalistic
bbdev operation
- useful for bbdev smoke testing and in measuring the overhead
introduced by the bbdev library
- 'bbdev_null' pmd is enabled by default
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
- wireless baseband device (bbdev) library files
- bbdev is tagged as EXPERIMENTAL
- Makefiles and configuration macros definition
- bbdev library is enabled by default
- release notes of the initial version
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Move the vdev bus from lib/librte_eal to drivers/bus.
As the crypto vdev helper function refers to data structure
in rte_vdev.h, so we move those helper function into drivers/bus
too.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The following APIs's are implemented in the
librte_flow_classify library:
rte_flow_classifier_create
rte_flow_classifier_free
rte_flow_classifier_query
rte_flow_classify_table_create
rte_flow_classify_table_entry_add
rte_flow_classify_table_entry_delete
The following librte_table API's are used:
f_create to create a table.
f_add to add a rule to the table.
f_del to delete a rule from the table.
f_free to free a table
f_lookup to match packets with the rules.
The library supports counting of IPv4 five tupple packets only,
ie IPv4 UDP, TCP and SCTP packets.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
This patch dissociates single-queue indirection tables and hash QP objects
from Rx queue structures to relinquish their control to users through the
RSS flow rule action, while simultaneously allowing multiple queues to be
associated with RSS contexts.
Flow rules share identical RSS contexts (hashed fields, hash key, target
queues) to save on memory and other resources. The trade-off is some added
complexity due to reference counters management on RSS contexts.
The QUEUE action is re-implemented on top of an automatically-generated
single-queue RSS context.
The following hardware limitations apply to RSS contexts:
- The number of queues in a group must be a power of two.
- Queue indices must be consecutive, for instance the [0 1 2 3] set is
allowed, however [3 2 1 0], [0 2 1 3] and [0 0 1 1 2 3 3 3] are not.
- The first queue of a group must be aligned to a multiple of the context
size, e.g. if queues [0 1 2 3 4] are defined globally, allowed group
combinations are [0 1] and [2 3]; groups [1 2] and [3 4] are not
supported.
- RSS hash key, while configurable per context, must be exactly 40 bytes
long.
- The only supported hash algorithm is Toeplitz.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
In order to achieve reproducible builds, always use the same
order when listing object files to build dependencies lists.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Add mrvl net pmd driver skeleton providing base for the further
development. Besides the basic functionality QoS configuration is
introduced as well.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
MRVL net pmd needs rte_cfgfile to parse QoS configuration file thus
librte_pmd_mrvl.a contains undefined symbols from librte_cfgfile.a.
As a result linking applications under app/ directory will fail
because librte_cfgfile.a comes before librte_pmd_mrvl.a during
the linking stage.
Linking the whole librte_cfgfile.a solves the issue.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Generic Segmentation Offload (GSO) is a SW technique to split large
packets into small ones. Akin to TSO, GSO enables applications to
operate on large packets, thus reducing per-packet processing overhead.
To enable more flexibility to applications, DPDK GSO is implemented
as a standalone library. Applications explicitly use the GSO library
to segment packets. To segment a packet requires two steps. The first
is to set proper flags to mbuf->ol_flags, where the flags are the same
as that of TSO. The second is to call the segmentation API,
rte_gso_segment(). This patch introduces the GSO API framework to DPDK.
rte_gso_segment() splits an input packet into small ones in each
invocation. The GSO library refers to these small packets generated
by rte_gso_segment() as GSO segments. Each of the newly-created GSO
segments is organized as a two-segment MBUF, where the first segment is a
standard MBUF, which stores a copy of packet header, and the second is an
indirect MBUF which points to a section of data in the input packet.
rte_gso_segment() reduces the refcnt of the input packet by 1. Therefore,
when all GSO segments are freed, the input packet is freed automatically.
Additionally, since each GSO segment has multiple MBUFs (i.e. 2 MBUFs),
the driver of the interface which the GSO segments are sent to should
support to transmit multi-segment packets.
The GSO framework clears the PKT_TX_TCP_SEG flag for both the input
packet, and all produced GSO segments in the event of success, since
segmentation in hardware is no longer required at that point.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Membership library is an extension and generalization of a traditional
filter (for example Bloom Filter and cuckoo filter) structure.
In general, the Membership library is a data structure that provides a
"set-summary" and responds to set-membership queries of whether a
certain element belongs to a set(s). A membership test for an element
will return the set this element belongs to or not-found if the
element is never inserted into the set-summary.
The results of the membership test are not 100% accurate. Certain
false positive or false negative probability could exist. However,
comparing to a "full-blown" complete list of elements, a "set-summary"
is memory efficient and fast on lookup.
This patch adds the main API definition.
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
