After removing rte_eth_devices from testpmd the vm_hotplug no longer
recovered after removal of a device, because the port was closed
before querying it.
Fixes: 0a0821bcf3 ("app/testpmd: remove most uses of internal ethdev array")
Signed-off-by: Paulis Gributs <paulis.gributs@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
csumonly engine calculates Tx checksum of a tunnelled packet
for outer headers only or separately for outer and inner headers.
The calculation method is determined by checksum configuration options.
If Tx checksum calculation is separated,
the inner headers are processed before outer headers.
Inner headers processing sets checksum values to 0 unconditionally.
If Tx configuration offloads inner checksums only, outer checksum
calculation in software will read 0 instead of real values
and produce wrong result.
The patch zeroes inner checksums only before software calculation.
Fixes: 6b520d54eb ("app/testpmd: use Tx preparation in checksum engine")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Running with stdout suppressed or redirected for further processing
is very confusing in the case of errors. Fix it by logging errors and
warnings to stderr.
Since lines with log messages are touched anyway concatenate split
format strings to make it easier to search using grep.
Fix indent of format string arguments.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch removes most uses of the global variable rte_eth_devices
from testpmd. This was done to avoid using the object directly which
applications should not do.
Most uses have been replaced with standard function calls, however
the use of it in the show_macs function could not be replaced as no
function call exists to get all mac addresses of a given port.
Signed-off-by: Paulis Gributs <paulis.gributs@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
MAC address of each port in global variable ports hasn't been updated
after resetting. It was the initial one after resetting VF MAC address.
This patch gets correct port MAC address when starting port.
Fixes: a5279d2561 ("app/testpmd: check status of getting MAC address")
Cc: stable@dpdk.org
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Aman Deep Singh <aman.deep.singh@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Command help string is missing 'reset' keyword,
although description has it. Adding it.
Fixes: 97f1e19679 ("app/testpmd: add port reset command")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
This patch adds checking if RAW API is supported at the start
of the test command "cryptodev_qat_raw_api_autotest".
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
In order to test the new mlx5 crypto PMD, the driver is added to the
crypto test application.
Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The AES-XTS algorithm can supports wrapped key and data-unit.
The encryption/decryption can be done out of place and using multi
segments.
Add multi segment and out of place tests to the recently added AES-XTS
vectors, which support using data-unit and a wrapped key.
Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The AES-XTS algorithm supports using a wrapped key.
In AES-XTS the data-unit defines the data block size to be
encrypted\decrypted.
Add AES-XTS vectors with a wrapped key.
Add a variable stating whether the key is wrapped or not.
Add the AES-XTS data-unit.
Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Currently, private_data_offset for the sessionless is computed
wrongly which includes extra bytes added by
sizeof(struct rte_crypto_sym_xform) * 2. This causes buffer
overflow which leads to test application crash while freeing the
ops mempool. This patch provides fix for the same and also takes
care of increasing the length of ops to accommodate space for
rte_event_crypto_metadata while creating the crypto ops mempool.
Fixes: 3c2c535ecf ("test: add event crypto adapter auto-test")
Cc: stable@dpdk.org
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Reported-by: Ciara Power <ciara.power@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
For acpi_cpufreq and cppc_cpufreq, both cpuinfo_cur_freq and
scaling_cur_freq exist. For pstate, only scaling_cur_freq exists.
And value in scaling_cur_freq and cpuinfo_cur_freq may not be the
same. For acpi_cpufreq and cppc_cpufreq, we should check
cpuinfo_cur_freq but not scaling_cur_freq. So here change the
check sequence to make sure it works for all cpufreq drivers.
Besides, add rounding for pstate driver.
Fixes: ff6dfb8e49 ("test/power: fix CPU frequency check")
Cc: stable@dpdk.org
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Acked-by: David Hunt <david.hunt@intel.com>
Add a new testpmd pattern field 'last_rsvd' that supports the
last 8-bits matching of VXLAN header.
The examples for the "last_rsvd" pattern field are as below:
1. ...pattern eth / ipv4 / udp / vxlan last_rsvd is 0x80 / end ...
This flow will exactly match the last 8-bits to be 0x80.
2. ...pattern eth / ipv4 / udp / vxlan last_rsvd spec 0x80
vxlan mask 0x80 / end ...
This flow will only match the MSB of the last 8-bits to be 1.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Raslan Darawsheh <rasland@nvidia.com>
The new flow item allows PMD to offload IPv4 IHL field for matching,
if hardware supports that operation.
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
For the newly attached ports (with "port attach" command) the
default offloads settings, configured from application command
line, were not applied, causing port start failure following
the attach.
For example, if scattering offload was configured in command
line and rxpkts was configured for multiple segments, the newly
attached port start was failed due to missing scattering offload
enable in the new port settings. The missing code to apply
the offloads to the new device and its queues is added.
The new local routine init_config_port_offloads() is introduced,
embracing the shared part of port offloads initialization code.
Fixes: c9cce42876 ("ethdev: remove deprecated attach/detach functions")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Aman Deep Singh <aman.deep.singh@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
On arm platform, the value in "/sys/.../cpuinfo_cur_freq" may not
be exactly the same as what was set when using CPPC cpufreq driver.
For other cpufreq driver, no need to round it currently, or else
this check will fail with turbo enabled. For example, with acpi_cpufreq,
cpuinfo_cur_freq can be 2401000 which is equal to freqs[0].It should
not be rounded to 2400000.
Fixes: 606a234c6d ("test/power: round CPU frequency to check")
Cc: stable@dpdk.org
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Acked-by: David Hunt <david.hunt@intel.com>
Currently in DPDK only acpi_cpufreq and pstate_cpufreq drivers are
supported, which are both not available on arm64 platforms. Add
support for cppc_cpufreq driver which works on most arm64 platforms.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Acked-by: David Hunt <david.hunt@intel.com>
Replaces the use of local ARRAY_SIZE macro, which is not used
anywhere else, with the formal RTE_DIM macro for better
consistency in crypto unit test.
Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Fixed typo in the crypto unit test ESN function name by
replacing the word 'encryt' with the correct word 'encrypt'.
test_authenticated_encryt_with_esn is now called
test_authenticated_encrypt_with_esn.
Fixes: 699741912d ("test/crypto: add case for auth only trailer")
Cc: stable@dpdk.org
Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Fixed typo in the testcase description for AES in the crypto
unit test suite by changing the word 'Scater' to 'Scatter'.
Fixes: c9c9c4ed87 ("app/test: check scatter-gather for crypto drivers")
Cc: stable@dpdk.org
Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
Modifies the scheduler tests in the crypto unit test suite
to replace the usage of the word 'slave' with the more
appropriate word 'worker'.
The scheduler test functions were modified as follows:
test_scheduler_attach_slave_op is now called
test_scheduler_attach_worker_op,
test_scheduler_detach_slave_op is
test_scheduler_detach_worker_op.
Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Use m only after it was checked not to be NULL.
Fixes: 202d375c60 ("app/test: add cryptodev unit and performance tests")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add missing rte_mbuf size in mempool allocation for
out-of-place operation.
Fixes: bf9d6702ec ("app/crypto-perf: use single mempool")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Registered cn9k and cn10k for asymmetric crypto
autotest. Documentation and release notes are also
updated.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
When we use the following cmd to modify the link speed of specified
port: "port config <port_id> speed xxx duplex xxx", we have to stop
all ports. It's not necessary.
Fixes: 82113036e4 ("ethdev: redesign link speed config")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
- Disable unsupported apps on Windows
- Enable building of testpmd on Windows
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Function print_fdir_mask and print_fdir_flex_payload are only called
when either i40e or ixgbe presents. Extend existing #if defined to
include these two functions, to remove "unused function" compilation
warning.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
- Make printf format OS independent
- Replace htons with RTE_BE16
- Replace POSIX specific inet_aton with OS independent inet_pton
- Replace sleep with rte_delay_us_sleep
- Replace random with rte_rand
- #ifndef mman related code for now
- Fix header inclusion
- Include rte_os_shim.h in testpmd.h
- Remove redundant headers
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Passing an uint32_t pointer to an enum pointer parameter causes
pointer-sign warning on Windows (converts between pointers to
integer types with different sign), since enum is implicitly
converted to int on Windows.
And the current enum pointer parameter of that function is actually
misleading and should be fixed as an uint32_t pointer parameter.
Fixes: b19da32e31 ("app/testpmd: add FEC command")
Cc: stable@dpdk.org
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Resolve name collisions with Windows types.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Add a simple unit test for checksum API.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Use out only after it was checked not to be null.
Fixes: 4d07cbefe3 ("app/testpmd: add commands for conntrack")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Reviewed-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Aman Deep Singh <aman.deep.singh@intel.com>
Add option to configure unique mempool for each ethernet device
port. The new option available with `pipeline_atq` and
`pipeline_queue` tests.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
For "order_launch_lcores" function, wmb after that the main lcore
updates the variable "t->err", which represents the end of the test
signal, is unnecessary. Because after the main lcore updates this
signal variable, it will jump out of the launch function loop, and wait
other lcores stop or return error in the main function(evt_main.c).
During this time, there is no storing operation and thus no need for
wmb.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Seen with address sanitizer.
rte_mempool_virt2iova() can only be used on mempool elements. In this case,
it is incorrect, and rte_mem_virt2iova() has to be used.
Bugzilla ID: 737
Fixes: 7b295dceea ("test/mbuf: add unit test cases")
Cc: stable@dpdk.org
Reported-by: Zhihong Peng <zhihongx.peng@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
This hack was needed with the make build system.
With meson, any private header from a library is visible as long as a
dependency to this library is expressed.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Fix two issues found when writing PMD unit tests for HW ptype and
L4 checksum offload:
- The version field in the IPv6 header was being set to zero,
which prevented hardware from recognizing it as IPv6. The
IP version field is now set to six.
- The payload_len field was being initialized using host byte
order, which (among other things) resulted in incorrect L4
checksum computation. The payload_len field is now set using
network (big-endian) byte order.
Fixes: 92073ef961 ("bond: unit tests")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The directory steam was not closed when the hugepage action was
HUGEPAGE_CHECK_EXISTS. This caused a memory leak in some parts of
the unit tests.
Fixes: 45f1b6e868 ("app: add new tests on eal flags")
Cc: stable@dpdk.org
Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Fixes for a few memory leaks in the cmdline_autotest unit test.
All of the leaks were related to not freeing the commandline struct
after testing had completed.
Fixes: dbb860e03e ("cmdline: tests")
Cc: stable@dpdk.org
Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The tests 'alarm_autotest' and 'cycles_autotest' rely on the underlying
system having very accurate and precise timing. On systems where the
timing isn't as rigid, or the load is particularly high, these tests are
unreliable since the wake latency from the scheduler can be high enough
to miss the timing window.
Remove the timing related tests from the test suites. These tests now
ensure the add/remove callback infrastructure unit tests, but drop the
waits and reliance on system timing and load.
This avoids FAIL on various testing infrastructures.
Signed-off-by: Aaron Conole <aconole@redhat.com>
GCC 11 complains that 'a' is uninitialized.
../dpdk/app/test/test_prefetch.c: In function 'test_prefetch':
../dpdk/app/test/test_prefetch.c:25:9:
error: 'a' may be used uninitialized [-Werror=maybe-uninitialized]
25 | rte_prefetch0(&a);
| ^~~~~~~~~~~~~~~~~
Fix by initializing 'a'.
Bugzilla ID: 714
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Reported-by: Ali Alnubani <alialnu@nvidia.com>
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Tested-by: Ali Alnubani <alialnu@nvidia.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Fix the allocation for sessions, to prevent an array-bounds
warning with GCC 11. Set the not created session to NULL.
Fixes: 202d375c60 ("app/test: add cryptodev unit and performance tests")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This file has redundant BSD license text that is already
replaced by the use of SPDX license id.
Having both is unnecessary and potentially confusing.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The return value for a test when the required PMD is not loaded should
be TEST_SKIPPED, rather than TEST_FAILED.
Fixes: 8bfdd8a7f0 ("test/crypto: refactor to use sub test suites")
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Variable i is used as a denominator which may be zero, and
this may result in segmentation fault.
This patch fixed it.
Fixes: 948bc3d6d0 ("test: add reciprocal based division")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Build error:
../app/test/test_table_tables.c: In function ‘test_table_stub’:
../app/test/test_table_tables.c:31:9:
warning: ‘memset’ offset [0, 31] is out of the bounds [0, 0]
[-Warray-bounds]
memset((uint8_t *)mbuf + sizeof(struct rte_mbuf) + 32, 0, 32); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../app/test/test_table_tables.c:151:25:
note: in expansion of macro ‘PREPARE_PACKET’
151 | PREPARE_PACKET(mbufs[i], 0xadadadad);
| ^~~~~~~~~~~~~~
'key' points to mbuf header + 32 bytes, and memset clears next 32 bytes
of 'key', so overall there needs to be 64 bytes after mbuf header.
Adding a mbuf size check before memset.
The original code has an assumption that mbuf data buffer follows mbuf
header, this patch accepts same assumption.
Bugzilla ID: 677
Fixes: 5205954791 ("app/test: packet framework unit tests")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
when turbo is enabled or disabled, the frequency is set to a low non-turbo
frequency, so we need to set to the frequency expected by the test before
checking.
Fixes: aeaeaf5f2d ("test/power: add cases for turbo feature")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
With the intel_pstate driver and turbo enabled, indexing is slightly
different to normal, so to get the test to work properly, enable
turbo at the start.
Fixes: ed7c51a6a6 ("app/test: vm power management")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
