Code commit for 'make -f' support, breaks the build in cases where
entries in $(MAKEFILE_LIST) are absolute paths. This commit uses
notdir and firstword to ensure that only the local filename is used.
Fixes: 3a5c339d51 ("mk: support renamed Makefile in external project")
Cc: stable@dpdk.org
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
When mlx5 is not compiled directly as an independent shared object (e.g.
CONFIG_RTE_BUILD_SHARED_LIB not enabled for performance reasons), DPDK
applications inherit its dependencies on libibverbs and libmlx5 through
rte.app.mk.
This is an issue both when DPDK is delivered as a binary package (Linux
distributions) and for end users because rdma-core then propagates as a
mandatory dependency for everything.
Application writers relying on binary DPDK packages are not necessarily
aware of this fact and may end up delivering packages with broken
dependencies.
This patch therefore introduces an intermediate internal plug-in
hard-linked with rdma-core (to preserve symbol versioning) loaded by the
PMD through dlopen(), so that a missing rdma-core does not cause unresolved
symbols, allowing applications to start normally.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When mlx4 is not compiled directly as an independent shared object (e.g.
CONFIG_RTE_BUILD_SHARED_LIB not enabled for performance reasons), DPDK
applications inherit its dependencies on libibverbs and libmlx4 through
rte.app.mk.
This is an issue both when DPDK is delivered as a binary package (Linux
distributions) and for end users because rdma-core then propagates as a
mandatory dependency for everything.
Application writers relying on binary DPDK packages are not necessarily
aware of this fact and may end up delivering packages with broken
dependencies.
This patch therefore introduces an intermediate internal plug-in
hard-linked with rdma-core (to preserve symbol versioning) loaded by the
PMD through dlopen(), so that a missing rdma-core does not cause unresolved
symbols, allowing applications to start normally.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Skeleton rawdevice driver, on the lines of eventdev skeleton, is for
showcasing the rawdev library. This driver implements some of the
operations of the library based on which a test module can be
developed.
Design of skeleton involves a virtual device which is plugged into
VDEV bus on initialization.
Also, enable compilation of rawdev skeleton driver.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Each device in DPDK has a type associated with it - ethernet, crypto,
event etc. This patch introduces 'rawdevice' which is a generic
type of device, not currently handled out-of-the-box by DPDK.
A device which can be scanned on an installed bus (pci, fslmc, ...)
or instantiated through devargs, can be interfaced using
standardized APIs just like other standardized devices.
This library introduces an API set which can be plugged on the
northbound side to the application layer, and on the southbound side
to the driver layer.
The APIs of rawdev library exposes some generic operations which can
enable configuration and I/O with the raw devices. Using opaque
data (pointer) as API arguments, library allows a high flexibility
for application and driver implementation.
This patch introduces basic device operations like start, stop, reset,
queue and info support.
Subsequent patches would introduce other operations like buffer
enqueue/dequeue and firmware support.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The build system made a recursive call to "make" after
creating the build directory. This recursive call used
the hard-coded filename "Makefile", which prevented
builds from working if the file was renamed and make
called using "make -f". Taking the filename from
MAKEFILES_LIST make variable fixes this.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Vipin Varghese <vipin.varghese@intel.com>
Add checks during build to ensure that all symbols in the EXPERIMENTAL
version map section have __experimental tags on their definitions, and
enable the warnings needed to announce their use. Also add an
ALLOW_EXPERIMENTAL_APIS define to allow individual libraries and files
to declare the acceptability of experimental api usage
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch lays the groundwork for this driver (draft documentation,
copyright notices, code base skeleton and build system hooks). While it can
be successfully compiled and invoked, it's an empty shell at this stage.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
OPDL ring is the core infrastructure of OPDL PMD. OPDL ring library
provide the core data structure and core helper function set. The Ring
implements a single ring multi-port/stage pipelined packet distribution
mechanism. This mechanism has the following characteristics:
• No multiple queue cost, therefore, latency is significant reduced.
• Fixed dependencies between queue/ports is more suitable for complex.
fixed pipelines of stateless packet processing (static pipeline).
• Has decentralized distribution (no scheduling core).
• Packets remain in order (no reorder core(s)).
* Update build system to enable compilation.
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Signed-off-by: Peter Mccarthy <peter.mccarthy@intel.com>
Reviewed-by: Seán Harte <seanbh@gmail.com>
- bbdev 'turbo_sw' is the software accelerated version of 3GPP L1
Turbo coding operation using the optimized Intel FlexRAN SDK libraries.
- 'turbo_sw' pmd is disabled by default
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
- 'bbdev_null' is a basic pmd that performs a minimalistic
bbdev operation
- useful for bbdev smoke testing and in measuring the overhead
introduced by the bbdev library
- 'bbdev_null' pmd is enabled by default
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
- wireless baseband device (bbdev) library files
- bbdev is tagged as EXPERIMENTAL
- Makefiles and configuration macros definition
- bbdev library is enabled by default
- release notes of the initial version
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace the BSD license header with the SPDX tag for Makefiles
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Move the vdev bus from lib/librte_eal to drivers/bus.
As the crypto vdev helper function refers to data structure
in rte_vdev.h, so we move those helper function into drivers/bus
too.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Revert the patchset run-time Linking support including the following
3 commits:
Fixes: 84cc318424 ("eal/x86: select optimized memcpy at run-time")
Fixes: c7fbc80fe6 ("test: select memcpy alignment unit at run-time")
Fixes: 5f180ae329 ("efd: move AVX2 lookup in its own compilation unit")
The patchset would cause perf drop in vhost/virtio loopback performance
test. Because the run-time dispatch must cost at least a function call
comparing to the compile-time dispatch. And the reference cpu cycles value
is small. And in the test, when using 128-256 bytes packet, it would cause
16%-20% perf drop with mergeble path. When using 256 bytes packet, it would
cause 13% perf drop with vector path.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The following APIs's are implemented in the
librte_flow_classify library:
rte_flow_classifier_create
rte_flow_classifier_free
rte_flow_classifier_query
rte_flow_classify_table_create
rte_flow_classify_table_entry_add
rte_flow_classify_table_entry_delete
The following librte_table API's are used:
f_create to create a table.
f_add to add a rule to the table.
f_del to delete a rule from the table.
f_free to free a table
f_lookup to match packets with the rules.
The library supports counting of IPv4 five tupple packets only,
ie IPv4 UDP, TCP and SCTP packets.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
This patch dynamically selects functions of memcpy at run-time based
on CPU flags that current machine supports. This patch uses function
pointers which are bind to the relative functions at constrctor time.
In addition, AVX512 instructions set would be compiled only if users
config it enabled and the compiler supports it.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch dissociates single-queue indirection tables and hash QP objects
from Rx queue structures to relinquish their control to users through the
RSS flow rule action, while simultaneously allowing multiple queues to be
associated with RSS contexts.
Flow rules share identical RSS contexts (hashed fields, hash key, target
queues) to save on memory and other resources. The trade-off is some added
complexity due to reference counters management on RSS contexts.
The QUEUE action is re-implemented on top of an automatically-generated
single-queue RSS context.
The following hardware limitations apply to RSS contexts:
- The number of queues in a group must be a power of two.
- Queue indices must be consecutive, for instance the [0 1 2 3] set is
allowed, however [3 2 1 0], [0 2 1 3] and [0 0 1 1 2 3 3 3] are not.
- The first queue of a group must be aligned to a multiple of the context
size, e.g. if queues [0 1 2 3 4] are defined globally, allowed group
combinations are [0 1] and [2 3]; groups [1 2] and [3 4] are not
supported.
- RSS hash key, while configurable per context, must be exactly 40 bytes
long.
- The only supported hash algorithm is Toeplitz.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
A race condition can happen during parallel builds, where a header
might be installed in RTE_OUT/include before CFLAGS is recursively
expanded. This causes GCC to sometimes pick the header path as
SRCDIR/... and sometimes as RTE_OUT/include/... making the build
unreproducible, as the full path is used for the expansion of
__FILE__ and in the DWARF directory listing.
Installing all symlinks before all builds solves the problem. It is
still suboptimal, as the (fixed) path recorded in the DWARF dir
listing will include the user-configurable build output directory,
and thus will result in a different binary between different users
despite all other conditions being equal, but it is a simpler
approach that will anyway be obsolete once the build system is
switched to Meson.
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
In order to achieve reproducible builds, always use the same
order when listing object files to build dependencies lists.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
The result of find might not be stable depending on external
conditions.
Pipe it through LC_ALL=C sort to ensure reproducible results when
generating examples.dox.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
The output of wildcard might not be stable and depend on the
filesystem and other factors.
This means the content libdpdk.so linker script might change between
builds from the same sources.
Run the list through sort to ensure reproducibility.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Add mrvl net pmd driver skeleton providing base for the further
development. Besides the basic functionality QoS configuration is
introduced as well.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
MRVL net pmd needs rte_cfgfile to parse QoS configuration file thus
librte_pmd_mrvl.a contains undefined symbols from librte_cfgfile.a.
As a result linking applications under app/ directory will fail
because librte_cfgfile.a comes before librte_pmd_mrvl.a during
the linking stage.
Linking the whole librte_cfgfile.a solves the issue.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Generic Segmentation Offload (GSO) is a SW technique to split large
packets into small ones. Akin to TSO, GSO enables applications to
operate on large packets, thus reducing per-packet processing overhead.
To enable more flexibility to applications, DPDK GSO is implemented
as a standalone library. Applications explicitly use the GSO library
to segment packets. To segment a packet requires two steps. The first
is to set proper flags to mbuf->ol_flags, where the flags are the same
as that of TSO. The second is to call the segmentation API,
rte_gso_segment(). This patch introduces the GSO API framework to DPDK.
rte_gso_segment() splits an input packet into small ones in each
invocation. The GSO library refers to these small packets generated
by rte_gso_segment() as GSO segments. Each of the newly-created GSO
segments is organized as a two-segment MBUF, where the first segment is a
standard MBUF, which stores a copy of packet header, and the second is an
indirect MBUF which points to a section of data in the input packet.
rte_gso_segment() reduces the refcnt of the input packet by 1. Therefore,
when all GSO segments are freed, the input packet is freed automatically.
Additionally, since each GSO segment has multiple MBUFs (i.e. 2 MBUFs),
the driver of the interface which the GSO segments are sent to should
support to transmit multi-segment packets.
The GSO framework clears the PKT_TX_TCP_SEG flag for both the input
packet, and all produced GSO segments in the event of success, since
segmentation in hardware is no longer required at that point.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Membership library is an extension and generalization of a traditional
filter (for example Bloom Filter and cuckoo filter) structure.
In general, the Membership library is a data structure that provides a
"set-summary" and responds to set-membership queries of whether a
certain element belongs to a set(s). A membership test for an element
will return the set this element belongs to or not-found if the
element is never inserted into the set-summary.
The results of the membership test are not 100% accurate. Certain
false positive or false negative probability could exist. However,
comparing to a "full-blown" complete list of elements, a "set-summary"
is memory efficient and fast on lookup.
This patch adds the main API definition.
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The -march=atom flag is for older atom CPUs and don't support SSE4 which
is the minimum requirement for DPDK. And in fact, the current atom CPUs
support SSE4. So this patch removes atom as a target for DPDK builds and
adds a silvermont replacement instead.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This removes the dependency on specific Mellanox OFED libraries by
using the upstream rdma-core and linux upstream community code.
Both rdma-core upstream and Mellanox OFED are Linux user-space packages:
1. Rdma-core is Linux upstream user-space package.(Generic)
2. Mellanox OFED is Mellanox's Linux user-space package.(Proprietary)
The difference between the two are the APIs towards the kernel.
Support for x86-32 is removed due to issues in rdma-core library.
ICC compilation will be supported as soon as the following patch is
integrated in rdma-core:
https://marc.info/?l=linux-rdma&m=150643474705690&w=2
Signed-off-by: Shachar Beiser <shacharbe@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Users can now use 'make defconfig' to generate a configuration using
the most appropriate defaults for the current machine.
<arch-machine-execenv-toolchain>
arch taken from uname -m
machine defaults to native
execenv is taken from uname, Linux=linuxapp, otherwise bsdapp
toolchain is taken from $CC -v to see which compiler to use
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
When using the compiler to link libraries, include EXTRA_CFLAGS. This is
needed when cross-compiling to pass --sysroot, for example. GCC
cross-compilers built with Yocto don't use the --with-sysroot option,
making it necessary to pass the --sysroot command-line option.
This is the same solution as in commit e8fbb6d9cf ("mk: use extra cflags
when linking with compiler"), but applied to libs instead of apps.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Introduce the fail-safe poll mode driver initialization and enable its
build infrastructure.
This PMD allows for applications to benefit from true hot-plugging
support without having to implement it.
It intercepts and manages Ethernet device removal events issued by
slave PMDs and re-initializes them transparently when brought back.
It also allows defining a contingency to the removal of a device, by
designating a fail-over device that will take on transmitting operations
if the preferred device is removed.
Applications only see a fail-safe instance, without caring for
underlying activity ensuring their continued operations.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Used rte_log2_u32() to replace integer log2() to
remove libm dependency.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
NXP Copyright has been wrongly worded with '(c)' at various places.
This patch removes these extra characters. It also removes
"All rights reserved".
Only NXP copyright syntax is changed. Freescale copyright is not
modified.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
