virtio_pci.c is a more proper place for pci stuff; virtio_ethdev is not.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
Reviewed-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Tested-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Introduce struct virtio_pci_ops, to let legacy virtio (v0.95) and
modern virtio (1.0) have different implementation regarding to a
specific pci action, such as read host status.
With that, this patch reimplements all exported pci functions, in
a way like:
vtpci_foo_bar(struct virtio_hw *hw)
{
hw->vtpci_ops->foo_bar(hw);
}
So that we need pay attention to those pci related functions only
while adding virtio 1.0 support.
This patch introduced a new vtpci function, vtpci_init(), to do
proper virtio pci settings. It's pretty simple so far: just sets
hw->vtpci_ops to legacy_ops as we don't support 1.0 yet.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
Reviewed-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Tested-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Huawei Xie <huawei.xie@intel.com>
We should provide VIRTIO_PCI_QUEUE_SEL with vq->vq_queue_idx,
but not vq->queue_id.
vq->queue_id is the queue id from rte_eth_rx/tx_queue_setup(),
which always starts from 0 no matter which queue it is. However,
for virtio, even number is for RX queue, and odd number is for
TX queue.
Fixes: 5382b188fb ("virtio: add queue release")
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The rx_mbuf_alloc_failed counter was only cleared by virtio driver.
Now it is cleared by common rte_eth_stats_reset function for all
drivers at once.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
call rte_eth_copy_pci_info() after the RTE_PCI_DRV_INTR_LSC
has been initialised.
Fixes: eeefe73f0a ("drivers: copy PCI device info to ethdev data")
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Use new function rte_eth_copy_pci_info.
Copy device info for the following pdevs:
bnx2x
cxgbe
e1000
enic
fm10k
i40e
ixgbe
mlx4
mlx5
virtio
vmxnet3
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Make the virtio PMD allocate the array of unicast MAC addresses with
the maximum of entries (VIRTIO_MAX_MAC_ADDRS) that it exports.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Add xstats() functions and statistic strings to virtio PMD.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Add software RX ring in virtqueue.
Add fake_mbuf in virtqueue for wraparound processing.
Fill avail ring with blank mbufs in virtio_dev_vring_start
Add virtio_rxtx.h header file for RTE_VIRTIO_PMD_MAX_BURST.
Would move all rx/tx related declarations into this header file in future.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
The old code adjusts the config bytes we want to read depending on
what kind of features we have, but we later cast the entire buf we
read with "struct virtio_net_config", which is obviously wrong.
The wrong config reading results to a dead loop at virtio_send_command()
while starting testpmd.
The right way to go is to read related config bytes when corresponding
feature is set, which is exactly what this patch does.
Fixes: 823ad64795 ("virtio: support multiple queues")
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Acked-by: Huawei Xie <huawei.xie@intel.com>
There are some places in virtio driver where uint16_t or int are used
where it would be safer to use unsigned.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If host does not support virtio link state (like current DPDK vhost)
then don't set the flag. This keeps applications from incorrectly
assuming that link state is available when it is not. It also
avoids useless "guess what works in the config".
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
if input parameter vq is NULL, hw = vq->hw, causes a segmentation fault.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Some minor cleanups.
* pass constant to virtio_dev_queue_setup
* fix message on rx_queue_setup
* get rid of extra double spaces
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
The virtual queue ring size and the number of slots actually usable
are separate parameters. In the most common environment (QEMU)
the virtual queue ring size is 256, but some environments the
ring maybe much larger.
The ring size comes from the host and the driver must use the
actual size passed.
The number of descriptors can be either zero to use the whole
available ring, or some value smaller. This is used to limit
the number of mbufs allocated for the receive ring. If more
descriptors are requested than available the size is silently
truncated.
Note: the ring size (from host) must be a power of two, but
the number of descriptors used can be any size from 1 to the
size of the virtual ring.
Fixes: d78deadae4 ("virtio: fix ring size negotiation")
Reported-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Add function virtio_free_queues() and call from virtio_dev_close()
Use virtio_dev_rx_queue_release() and virtio_dev_tx_queue_release()
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Add functions virtio_dev_queue_release(), virtio_dev_rx_queue_release() and
virtio_dev_tx_queue_release().
Use queue_release in virtio_dev_uninit().
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit_t() function for virtio pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Fix NULL dereference if virtio control queue is not negotiated.
Signed-off-by: Damjan Marion <damarion@cisco.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Negotiate the virtio ring size. The host may allow for very large
rings but application may only want a smaller ring.
Conversely, if the number of descriptors requested exceeds the virtio
host queue size, then just silently use the smaller host size.
This fixes issues with virtio in non-QEMU envirionments.
For example Google Compute Engine allows up to 16K elements
in ring.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Change the features from bit mask to bit number. This allows the
DPDK driver to use the definitions from Linux (yes the header
files already use a license compatiable with DPDK). This makes DPDK
driver handle future feature bit changes.
Get rid of double negative code in the feature bit intialization.
Instead just have a new define with the list of feature bits implemented.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Don't attempt to set the MAC address table unless the host allows
it in feature negotiation. Also, don't return a value from mac_table_set
since all callers ignore the return value.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
If negotiation with host says that controlling Rx mode is
not supported, then don't try.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Putting blank line between function and following conditional
just wastes screen space, and makes code less obvious.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Upcoming drivers will need to be able to support other bus types.
This is a transparent change to how struct eth_driver is initialized.
It has not function or ABI layout impact, but makes adding a later
bus type (Xen, Hyper-V, ...) much easier.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move virtio PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
