This patch adds support of symmetric algorithm of RSS.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
When upper application calls the rte_eth_dev_rss_hash_conf_get API
function to get the RSS key parameters, the function should return the
RSS key length supported by the device. Otherwise, an error will occur
when the upper application needs to use the RSS key length supported
by this specified hardware for judgment and configure the specified
key into hardware.
For example, in the following scenario:
When users want to use their own RSS key, but the length of the key is
bigger than the one of the supported by hardware.
As a result, users need to get the RSS key length supported by hardware
according to the above API firstly, and then compare the actual obtained
RSS key length with the length of their own RSS key.
If the driver does not return the actual value, error may occur when
user calls the rte_eth_dev_rss_hash_update API function to configure
their own key into hardware.
Besides, this patch fixes the problem of stepping on memory when the RSS
key array configured by users are less than the RSS key length supported
by the driver at the same time.
Fixes: c37ca66f2b ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Currently, when performing test case as follow:
1. Run testpmd application based on hns3 network engine with multiple
receive queues(--rxq=N --txq=N, N>1).
2. Create the special RSS rules by "create flow ..." command in the
command prompt of the testpmd application.
3. Flush the RSS rules created in step 2 by "flow flush ..." command.
4. Enable RSS by "port config all rss all" command.
In step 4, the command exeuctes successfully. This phenomenon is
inconsistent with the expectation. The API function named
rte_eth_dev_rss_hash_update called in the command should return error
and the command should fail.
This patch fixes it by adding a flag for disabling RSS in the driver.
When RSS rules is flushed, we set the the flag with true, and the
'.rss_hash_update' ops implementation function named
hns3_dev_rss_hash_update return -EINVAL.
Fixes: c37ca66f2b ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
For the current hns3 PMD driver, there are some RSS related bugs at
the following scenes:
1. Start the application with the number of Rx queues equals 1(--rxq=1),
modify the number of Rx queue to some number greater than 1 during
normal operation. As a result, upper application can't receive packets
from multiple rx queues.
2. Start testpmd application with the option disable-rss and the number
of Rx queue is greater than 1(--disable-rss --rxq=N, N>1). As a result,
upper application still can receive packets from multiple rx queues.
The root cause as below:
There are some error configuration in the RSS indirection table of hns3
network engine.
This patch fixes them with the following modification.
1. When RSS size is changed, we need to update RSS redirection table
maintained by driver and configure them to hardware. Besides, during
the entire reset process, we need to ensure that the RSS table
information are not overwritten and configured directly to the hardware
in the RESET_STAGE_RESTORE stage of the reset process.
2. When sarting testpmd application with the options disable-rss, it
doesn't need to configure RSS redirection table to hardware.
Fixes: c37ca66f2b ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch changed the default algorithm of RSS from simle_xor to
toeplitz because toeplitz is used more frequently by upper applications
such as ceph.
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch fixes the bug that hardware configuration called
tc_size doesn't restore to the initial value when starting
the app, configuring PFC and then restarting the app,
because of the tc_mode didn't initial when rss is disabled.
Fixes: c37ca66f2b ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch adds support for RSS of hns3 PMD driver. It included the
follow functions:
In file hns3_rss.c:
1) Set/query hash key, rss_hf by .rss_hash_update/.rss_hash_conf_get ops
callback functions.
2) Set/query redirection table by .reta_update/.reta_query. ops callback
functions.
3) Set/query hash algorithm by .filter_ctrl ops callback function when
the 'filter_type' is RTE_ETH_FILTER_HASH.
In file hns3_flow.c:
1) Set hash key, rss_hf, redirection table and algorithm by .create ops
callback function.
2) Disable RSS by .destroy or .flush ops callback function.
3) Check the effectiveness of the RSS's configuration by .validate ops
callback function.
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
