For "processed_pkts" function, no operations should keep the order that
being executed before loading "worker[i].processed_pkts".
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Simply replace rte_smp barrier with atomic threand fence.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
For "processed_pkts" and "total_latency" functions, no operations should
keep the order that being executed before loading
"worker[i].processed_pkts". Thus rmb is unnecessary before loading.
For "perf_launch_lcores" function, wmb after that the main lcore
updates the variable "t->done", which represents the end of the test
signal, is unnecessary. Because after the main lcore updates this
siginal variable, it will jump out of the launch function loop, and wait
other lcores stop or return error in the main function(evt_main.c).
During this time, there is no important storing operation and thus no
need for wmb.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
This patch fixes RTE SMP barrier bugs for the perf test of eventdev.
For the "perf_process_last_stage" function, wmb after storing
processed_pkts should be moved before it. This is because the worker
lcore should ensure it has really finished data processing, e.g. event
stored into buffers, before the shared variables "w->processed_pkts"are
stored.
For the "perf_process_last_stage_latency", on the one hand, the wmb
should be moved before storing into "w->processed_pkts". The reason is
the same as above. But on the other hand, for "w->latency", wmb is
unnecessary due to data dependency.
Fixes: 2369f73329 ("app/testeventdev: add perf queue worker functions")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
For eventdev pipeline test, in burst_tx cases, there is no needed to
set ev.op as RTE_EVENT_OP_RELEASE and call pipeline_event_enqueue_burst
to release events. This is because for tx mode(internal_port=true),
the capability "implicit_release" of dev is enabled, and the app can
release events by "rte_event_dequeue_burst" rather than enqueue.
Fixes: 314bcf58ca ("app/eventdev: add pipeline queue worker functions")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
For the fwd mode (internal_port = false) in pipeline test,
processed-pkts increment should after enqueue. However, in
multi_stage_fwd and multi_stage_burst_fwd, "w->processed_pkts" is
increased before enqueue.
To fix this, move "w->processed_pkts" increment after enqueue, and then
the main core can load the correct number of processed packets.
Fixes: 314bcf58ca ("app/eventdev: add pipeline queue worker functions")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Fix SEGFAULT when nb_timer_adapters command line parameter is
set to 0.
Fixes: 98c6292105 ("app/eventdev: add options for event timer adapter")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The order test stored a sequence number in the deprecated mbuf field
seqn.
It is moved to a dynamic field in order to allow removal of seqn.
Signed-off-by: David Marchand <david.marchand@redhat.com>
The order test stored the flow ID in the deprecated mbuf field udata64.
It is moved to a dynamic field in order to allow removal of udata64.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Replace master lcore with main lcore and
replace slave lcore with worker lcore.
Keep the old functions and macros but mark them as deprecated
for this release.
The "--master-lcore" command line option is also deprecated
and any usage will print a warning and use "--main-lcore"
as replacement.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This commit implements the eventdev ABI changes required by
the DLB/DLB2 PMDs. Several data structures and constants are modified
or added in this patch, thereby requiring modifications to the
dependent apps and examples.
The DLB/DLB2 hardware does not conform exactly to the eventdev interface.
1) It has a limit on the number of queues that may be linked to a port.
2) Some ports a further restricted to a maximum of 1 linked queue.
3) DLB does not have the ability to carry the flow_id as part
of the event (QE) payload. Note that the DLB2 hardware is capable of
carrying the flow_id.
Following is a detailed description of the changes that have been made.
1) Add new fields to the rte_event_dev_info struct. These fields allow
the device to advertise its capabilities so that applications can take
the appropriate actions based on those capabilities.
struct rte_event_dev_info {
uint32_t max_event_port_links;
/**< Maximum number of queues that can be linked to a single event
* port by this device.
*/
uint8_t max_single_link_event_port_queue_pairs;
/**< Maximum number of event ports and queues that are optimized for
* (and only capable of) single-link configurations supported by this
* device. These ports and queues are not accounted for in
* max_event_ports or max_event_queues.
*/
}
2) Add a new field to the rte_event_dev_config struct. This field allows
the application to specify how many of its ports are limited to a single
link, or will be used in single link mode.
/** Event device configuration structure */
struct rte_event_dev_config {
uint8_t nb_single_link_event_port_queues;
/**< Number of event ports and queues that will be singly-linked to
* each other. These are a subset of the overall event ports and
* queues; this value cannot exceed *nb_event_ports* or
* *nb_event_queues*. If the device has ports and queues that are
* optimized for single-link usage, this field is a hint for how many
* to allocate; otherwise, regular event ports and queues can be used.
*/
}
3) Replace the dedicated implicit_release_disabled field with a bit field
of explicit port capabilities. The implicit_release_disable functionality
is assigned to one bit, and a port-is-single-link-only attribute is
assigned to other, with the remaining bits available for future assignment.
* Event port configuration bitmap flags */
#define RTE_EVENT_PORT_CFG_DISABLE_IMPL_REL (1ULL << 0)
/**< Configure the port not to release outstanding events in
* rte_event_dev_dequeue_burst(). If set, all events received through
* the port must be explicitly released with RTE_EVENT_OP_RELEASE or
* RTE_EVENT_OP_FORWARD. Must be unset if the device is not
* RTE_EVENT_DEV_CAP_IMPLICIT_RELEASE_DISABLE capable.
*/
#define RTE_EVENT_PORT_CFG_SINGLE_LINK (1ULL << 1)
/**< This event port links only to a single event queue.
*
* @see rte_event_port_setup(), rte_event_port_link()
*/
#define RTE_EVENT_PORT_ATTR_IMPLICIT_RELEASE_DISABLE 3
/**
* The implicit release disable attribute of the port
*/
struct rte_event_port_conf {
uint32_t event_port_cfg;
/**< Port cfg flags(EVENT_PORT_CFG_) */
}
This patch also removes the depreciation notice and announce
the new eventdev ABI changes in release note.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Since we are not holding the mbufs or creating any references
in the app, hence mbuf fast free offload can be enabled.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a macro __rte_always_inline, forcing functions to be inlined,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
During LTO build compiler reports some 'false positive' warnings about
variables being possibly used uninitialized. This patch silences these
warnings.
Exemplary compiler warning to suppress (with LTO enabled):
error: ‘service_id’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
ret = evt_service_setup(service_id);
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
This patch introduces a `flag` in the Eth TX adapter enqueue API.
Some drivers may support burst functionality only with the packets
having same destination device and queue.
The flag `RTE_EVENT_ETH_TX_ADAPTER_ENQUEUE_SAME_DEST` can be used
to indicate this so the underlying driver, for drivers to utilize
burst functionality appropriately.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add options to set mbuf size and max packet size which allow the user to
enable jumbo frames and Rx/Tx scatter gather.
Arrange `struct evt_options` based on ascending order of data type to
make it more readable.
Packet mbuf size can be modified by using `--mbuf_sz=N`.
Max packet size can be modified by using `--max_pkt_sz=N`.
These options are only applicable `pipeline_atq` and `pipeline_queue`
tests.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across apps according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_dev_info_get() return value was changed from void to int, so
this patch modify rte_eth_dev_info_get() usage across apps
according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When using synthetic and timer event producer reduce the calls made to
mempool library by using get_bulk() instead of get().
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When producer type is event timer adapter producer lcore checks are
skipped. Since, timer adapter relies on SW to arm timers producer lcore
is essential for its functionality.
Verify producer lcore validity when producer type is event timer
adapter.
Fixes: b01974da9f ("app/eventdev: add ethernet device producer option")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Configure event ports based on the underlying event device info rather
than using hardcoded values.
Fixes: 5710e75181 ("app/testeventdev: add order port setup")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Promote the adapter functions and rte_event_port_unlinks_in_progress()
as stable as it's been added for a while now and multiple drivers and
test application like test-eventdev has been tested using the adapter APIs.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add option to provide a global dequeue timeout that is used to create
the eventdev.
The dequeue timeout provided will be common across all the worker
ports. If the eventdev hardware supports power management through
dequeue timeout then this option can be used for verifying power
demands at various packet rates.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Start event producers after eventdev i.e. consumer is started as in some
architectures it might lead to undefined behaviour or events being
dropped.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Previously, the total number of event timers per adapter was set to an
arbitrary value, set it to mempool size instead as it defines the max
event timers that can be armed.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
If timer events get dropped for some reason, the thread that launched
producer and worker cores will never exit, because the deadlock check
doesn't currently apply to the event timer adapter case. This commit
fixes this.
Fixes: d008f20bce ("app/eventdev: add event timer adapter as a producer")
Cc: stable@dpdk.org
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The DPDK website has a new URL scheme since June 2018.
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
When compiling with -O1, this error can appear:
app/test-eventdev/test_pipeline_common.c:332:6: error:
‘ret’ may be used uninitialized in this function
If there is no device, then ret is returned without being initialized.
It is fixed by setting 0 as initial value.
Fixes: 032a965a8f ("app/eventdev: support Tx adapter")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Convert existing Tx service based pipeline to Tx adapter based APIs and
simplify worker functions.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Remove unnecessary newline at the end of logs.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Use proper teardown sequence when SIGINT is caught to prevent
eventdev from going into undefined state.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
ethdev layer introduced checks for application requested RSS hash
functions and returns error for ones unsupported by hardware
This check breaks some sample applications which blindly configures
RSS hash functions without checking underlying hardware support.
Updated examples to mask out unsupported RSS has functions during device
configuration.
Prints a log if configuration values updated by this check.
Fixes: aa1a6d87f1 ("ethdev: force RSS offload rules again")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Meijuan Zhao <meijuanx.zhao@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
Some test applications and examples were not converted
to the new offload API introduced in 17.11.
For reference, see "Hardware Offload" in
doc/guides/prog_guide/poll_mode_drv.rst
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
