If igb_alloc_rx_queue_mbufs() would fail to allocate an mbuf for RX queue,
it calls igb_rx_queue_release(rxq).
That causes rxq to be silently freed, without updating
dev->data->rx_queues[].
So any further reference to it will trigger the SIGSEGV.
Same thing in em PMD too.
To fix: igb_alloc_rx_queue_mbufs() should just return an error to the
caller and let upper layer to deal with the probem.
That's what ixgbe PMD is doing right now.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add __rte_unused to
pci_unbind_kernel_driver(struct rte_pci_device *dev)
Signed-off-by: Alan Carew <alan.carew@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Recent change to rte_dump_tailq (commit 591a9d7985),
which now uses a FILE parameter causes compilation to fail under FreeBSD
and sourced to a missing include of stdio.h.
Errors:
rte_tailq.h: unknown type name 'FILE' void rte_dump_tailq(FILE *f);
rte_memory.h: unknown type name 'FILE' void rte_dump_physmem_layout(FILE *f);
Signed-off-by: Alan Carew <alan.carew@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
If pcap_sendpacket() fails, then eth_pcap_tx shouldn't silently free that
mbuf and continue.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
The unit of allocated_size is MB, so the change below is made.
Otherwise, it will fail to free memory when available memory is not enough.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Since Linux kernel version 3.13.0,
the xen_create/destroy_contiguous_region() API has been changed,
and the first parameter is physical address in the API.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
The patch changes the way of reserving memory in Dom0 driver.
It will reserve memory at installing rte_dom0_mm.ko kernel module
instead of requesting memory dynamically during DPDK application startup.
Meanwhile, now driver requests memory size of 4M once first,
if it failed, and request memory size of 2M once.
The main reasons for these changes are as follows:
First, to reduce the impact of increasing in memory fragment
after system run a long time.
Second, to reduce number of memory segment.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch supports multiple queues feature in DPDK based virtio-net frontend.
It firstly gets max queue number of virtio-net from virtio PCI configuration and
then send command to negotiate the queue number with backend; When receiving and
transmitting packets, it negotiates multiple virtio-net queues which serve RX/TX;
To utilize this feature, the backend also need support multiple queues feature
and enable it.
Signed-off-by: Ouyang Changchun <changchun.ouyang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch cleanups some coding style issue, and fixes some errors and warnings
reported by checkpatch.pl.
Signed-off-by: Ouyang Changchun <changchun.ouyang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch implements queue start and stop functionality in IXGBE PMD;
it also enable hardware loopback for VMDQ mode in IXGBE PMD.
Signed-off-by: Ouyang Changchun <changchun.ouyang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch adds API to support queue start and stop functionality for RX/TX.
It allows RX and TX queue is started or stopped one by one, instead of starting
and stopping all of them at the same time.
Signed-off-by: Ouyang Changchun <changchun.ouyang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
1) Add a new function "rss_hash_conf_get" in the PMD API to retrieve the
current configuration of the RSS functions and/or of the RSS key used
by a NIC to compute the RSS hash of input packets.
The new function uses the existing data structure "rte_eth_rss_conf" for
returning the RSS hash configuration.
2) Add the ixgbe-specific function "ixgbe_dev_rss_hash_conf_get" and the
igb-specific function "eth_igb_rss_hash_conf_get" to retrieve the RSS
hash configuration of ixgbe and igb controllers respectively.
3) Add the command "show port X rss-hash [key]" in the testpmd application
to display the RSS hash configuration of port X.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
1) Add a new function "rss_hash_update" in the PMD API to dynamically
update the RSS flags and/or the RSS key used by a NIC to compute the RSS
hash of input packets.
The new function uses the existing data structure "rte_eth_rss_conf" for
the argument that contains the new hash flags and/or the new hash key to
use.
2) Add the ixgbe-specific function "ixgbe_dev_rss_hash_update" and the
igb-specific function "eth_igb_rss_hash_update" to update the RSS
hash configuration of ixgbe and igb controllers respectively.
Before changing anything, these 2 functions check that the update RSS
operation does not attempt to disable RSS, if RSS was enabled at port
initialization time, or does not attempt to enable RSS, if RSS was
disabled at port initialization time.
Note:
Configuring the RSS hash flags and the RSS key used by a NIC consists in
updating appropriate PCI registers of the NIC.
These operations have been manually tested with the interactive commands
"write reg" and "write regbit" of the testpmd application.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Each entry of the RSS redirection table (RETA) of igb and ixgbe ports
contains a 4-bit RX queue index, thus imposing RSS RX queue indices to
be strictly lower than 16.
In addition, if a RETA entry is configured with a RX queue index that is
strictly lower than 16, but is greater or equal to the number of RX queues
of the port, then all input packets whose RSS hash value indexes that RETA
entry are silently dropped by the NIC.
Make the function rte_eth_dev_rss_reta_update() check that RX queue indices
that are supplied in the reta_conf argument are strictly lower than
ETH_RSS_RETA_MAX_QUEUE (16) and are strictly lower than the number of
RX queues of the port.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
e1000_vfadapt type corresponds to 82576 VF devices,
check e1000_set_mac_type() for more details.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
When initializing a VF with no initial MAC address assigned by
the underlying Host PF driver, assign a default MAC address.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The VF_RESET message of the 82599 PF/VF communication protocol issued by a
a Guest VF driver may include an optional permanent MAC address assigned to
the VF by the Guest OS, in order to make it recorded into the 82599 RAR
registers by the Host PF driver.
To indicate the absence of this optional MAC address, the VF_RESET command
assumes that a NULL MAC address is sent, instead of using a dedicated bit
for this purpose. However, when sending a VF_RESET command with no permanent
MAC address, the function ixgbe_reset_hw_vf() of the 82599 VF driver
directly invokes the function ixgbe_write_mbx_vf() with a message that does
not include a NULL MAC address, wrongly assuming that this function fills in
with zero all unused mailbox data registers.
More globally, it is safer to explicitely reset to zero all remaining mailbox
data registers that are not used to store the content of a message, in order
to reset the data sent in a previous VF/PF exchange (in either side),
including the last exchange performed by another Guest OS to which that VF
was previously assigned.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
On a 82599 VF, the deletion of a dynamically added MAC address consists in
first flushing all added MAC addresses, then in adding again all remaining MAC
addresses.
For this purpose, the function ixgbevf_remove_mac_addr() parses the pool
of MAC addresses associated with a VF, and must skip the VF permanent MAC
address that is stored into it, as well as all NULL MAC addresses.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
During the initialization of a VF device, the rte_eth_dev_start() function
indirectly invokes the PMD "mac_addr_add" function with the permanent MAC
address assigned to the device.
In the case of 82599 VFs, this operation leads to exhausting the very
limited set of PF resources used to store VF MAC addresses.
To address this issue, do nothing in the function ixgbevf_add_mac_addr()
if the added MAC address is equal to the permanent MAC address of the VF.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add missing PMD functions in the ixgbevf driver to add (respectively remove)
a MAC address to/from a 82599 VF.
For this purpose, these 2 functions use the VF/PF mailbox-based protocol.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When latest Linux ixgbe PF is used, and DPDK VF is used in DPDK application,
jumbo frames are not received.
Also - if Linux ixgbe PF has MTU set to 1500 (default),
then normal sized packets can be received by DPDK VF.
However, if Linux PF has MTU > 1500, then DPDK VF receives no packets
(normal or jumbo).
With ixgbe_mbox_api_10 ixgbe simply didn't allow set VF MTU > 1514 for 82599.
With ixgbe_mbox_ajpi_11 it does, though now, if PF uses jumbo frames,
it simply disables RX for all VFs.
So to work with PF ithat using jumbo frames, at startup each VF has to:
1. negotiate with PF mbox_api_11.
2. Send to PF SET_LPE message with desired MTU.
Note, that if PF already uses MTU bigger then asked by the VF,
then PF wouldn't take any action.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Bug: When a timer is running
- if rte_timer_stop is called, the pending decrement is
skipped (decremented only if the timer is pending) and due
to the update flag the future processing is skipped so the
timer is counted as pending while it is stopped. - the same
applies when rte_timer_reset is called but then the pending
statistics is additionally incremented so the timer is
counted pending twice.
Solution: decrement the pending
statistics after returning from the callback. If
rte_timer_stop was called, it skipped decrementing the
pending statistics. If rte_time_reset was called, the
pending statistics was incremented. If neither was called
and the timer is periodic, the pending statistics is
incremented when it is reloaded
Signed-off-by: Vadim Suraev <vadim.suraev@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Bug: when a periodic timer's callback is running, if another
timer is manipulated, the periodic timer is not reloaded.
Solution: set the update flag only if the modified timer is
in RUNNING state
Signed-off-by: Vadim Suraev <vadim.suraev@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Stop on EOF when reading commands from a file or a pipe.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Error of "implicit-function-declaration" can be seen when building KNI
kernel module on Linux kernel 3.6.10 platform, as follows.
lib/librte_eal/linuxapp/kni/igb_ethtool.c:
In function igb_get_eee:
lib/librte_eal/linuxapp/kni/igb_ethtool.c:
2441:4: error: implicit declaration of function
mmd_eee_adv_to_ethtool_adv_t
lib/librte_eal/linuxapp/kni/igb_ethtool.c:
In function igb_set_eee:
lib/librte_eal/linuxapp/kni/igb_ethtool.c:
2551:2: error: implicit declaration of function
ethtool_adv_to_mmd_eee_adv_t
The root cause is as follows.
On Fedora 18 with kernel 3.6.10, ETHTOOL_GEEE is defined in Linux
header file of "linux/ethtool.h", while is not defined in most of other
linux kernel versions.
mmd_eee_cap_to_ethtool_sup_t(), mmd_eee_adv_to_ethtool_adv_t() and
ethtool_adv_to_mmd_eee_adv_t() in kcompat.h are disabled by "#if
!defined(ETHTOOL_GEEE) || (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE <=
RHEL_RELEASE_VERSION(6,4))", while are called in igb_get_eee() in
igb_ethtool.c which is enabled by "#ifdef ETHTOOL_GEEE".
Reported-by: Prashant Upadhyaya <prashant.upadhyaya@aricent.com>
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The rte_scheduler will get stuck and not deliver any more packets
if there are two active subports and then one of them stops enqueing
more packets. This is because of a bug in how the grinder state machines
are managed.
If a non-zero grinder is assigned (but not yet active), then the dequeue
would miss it and always return zero packets. The cure is to always
do a first pass over all grinders.
Signed-off-by: Stephen Hemminger <shemming@brocade.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Fix build error if RTE_SCHED_DEBUG is enabled.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The existing rte scheduler can only be safely configured once per port
because a memory zone has a fixed size once it is created and can never
be freed or change in size.
This patch changes the scheduler to use rte_malloc instead. This allows
for a port to be reconfigured by doing rte_sched_port_free followed
rte_sched_port_config.
The patch also removes the now unused name parameter from the
port parameters structure.
Signed-off-by: Stephen Hemminger <shemming@brocade.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
There was an indentation error in commit d93c252e88
"convert to use of PMD_REGISTER_DRIVER and fix linking"
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
There was an indentation error in commit e57f20e051
"make vdev init path generic for both virtual and pci devices"
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Now that we've converted all the pmds in dpdk to use the driver registration
macro, rte_pmd_init_all has become empty. As theres no reason to keep it around
anymore, just remove it and fix up all the eample callers.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the vmxnet3 pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the vmxnet3 library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the virtio pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the virtio library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the ixgbevf pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the ixgbevf library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the ixgbe pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the ixgbe library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the igbvf pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the igbvf library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the igb pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the igb library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the e1000 pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the e1000 library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Currently, physical device pmds use a separate initalization path
(rte_pmd_init_all) while virtual devices use a constructor registration and
rte_eal_dev_init. Theres no reason to have them be separate. This patch
removes the vdev specific nomenclature from the vdev init path and makes it more
generic for use with all pmds. This is the first step in converting the
physical device pmds to using the same constructor based registration path that
the virtual devices use.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the xenvirt driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the xenvirt library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
A few notes:
xenvirt was unbuildable as of commit 4c39baf297d10c217e7d3e7370f26a1fede58308..
That commit neglected to include the rte_vdev.h header, so several structs were
left undefined. This patch includes a fix for that as well.
Also, The linkage for xenvirt is broken in much the same way pmd_ring was, in
that the xenvirt pmd has a function that is called directly from applications
(the example being the testpmd application). The function is
rte_mempool_gntalloc_create, and should clearly be moved into the rte_mempool
library, with the supporting code in the function implementation moved to a new
xenvirt library separate from the pmd. This is a large undertaking that
detracts from the purpose of this series however, and so for now, I'm leaving
the linkage to the application in place, and will address this issue in a later
series
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the ring driver to use the PMD_REGISTER_DRIVER macro and fix up the
Makefile so that its linkage is only done if we are building static libraries.
This means that the test applications now have no reference to the ring library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Note that the ring driver was also written in such a way that it violated some
general layering principles, several functions were contained in the pmd which
were being called by example from the test application in the app/test
directory. Specifically it was calling eth_ring_pair_attach,
eth_ring_pair_create and rte_eth_ring_devinit, which should only be called
internally to the dpdk core library. To correct this I've removed those
functions, and instead allowed them to be called indirectly at initalization
time using the vdev command line argument key nodeaction=<name>:<node>:<action>
where action is one of ATTACH or CREATE. I've tested out the functionality of
the command line with the testpmd utility, with success, and have removed the
called functions from the test utility. This will affect how the test utility
is invoked (the -d and --vdev option will need to be specified on the command
line now), but honestly, given the way it was coded, I think the testing of the
ring pmd was not the best example of how to code with dpdk to begin with. I
have also left the two layer violating functions in place, so as not to break
existing applications, but added deprecation warnings to them so that apps can
migrate off them.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the pcap driver to use the PMD_REGISTER_DRIVER macro and fix up the
Makefile so that its linkage is only done if we are building static libraries.
This means that the test applications now have no reference to the pcap library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Rather than have each driver have to remember to add a constructor to it to make
sure its gets registered properly, wrap that process up in a macro to make
registration a one line affair. This also sets the stage for us to make
registration of vdev pmds and physical pmds a uniform process
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Fix compilation error introduced by:
e5ac7c2ff3 eal: don't inline string functions
The stdio.h include is missing due to its removing from rte_string_fns.h.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add function to iterate over mempool.
Useful for diagnostic code that wants to look at mempool usage patterns.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When doing diagnostic function, it is useful to have a ability
to iterate over all memzones.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
It makes no sense to inline string functions, in fact snprintf
can't be inlined because the function supports variable number of
arguments.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: update includes]
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The DPDK dump functions are useful for remote debugging of an
applications. But when application runs as a daemon, stdout
is typically routed to /dev/null.
Instead change all these functions to take a stdio FILE * handle
instead. An application can then use open_memstream() to capture
the output.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: fix quota_watermark example]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
