This patch fixes the pcap file parsing in ip_pipeline. Originally, the
parser recognizes the pcap related entries regardless of the RTE_PORT_PCAP
macro definition status.
Fixes: fe5d04621303 ("examples/ip_pipeline: add pcap file dump")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch redesigns the API to set the link speed/s configuration
of an ethernet port. Specifically:
- it allows to define a set of advertised speeds for
auto-negociation.
- it allows to disable link auto-negociation (single fixed speed).
- default: auto-negociate all supported speeds.
A flag autoneg in struct rte_eth_link indicates if link speed was a
result of auto-negociation or was fixed by configuration.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch add packet dumping feature to ip_pipeline. Output port type
SINK now supports dumping packets to PCAP file before releasing mbuf back
to mempool. This feature can be applied by specifying parameters in
configuration file as shown below:
[PIPELINE1]
type = PASS-THROUGH
core = 1
pktq_in = SOURCE0 SOURCE1
pktq_out = SINK0 SINK1
pcap_file_wr = /path/to/eth1.pcap /path/to/eth2.pcap
pcap_n_pkt_wr = 80 0
The configuration section "pcap_file_wr" contains full path and name of
the PCAP file which the packets will be dumped to. If multiple SINKs
exists, each shall have its own PCAP file path listed in this section,
separated by spaces. Multiple SINK ports shall NOT share same PCAP file to
be dumped.
The configuration section "pcap_n_pkt_wr" contains integer value(s)
and indicates the maximum number of packets to be dumped to the PCAP file.
If this value is "0", the "infinite" dumping mode will be used. If this
value is N (N > 0), the dumping will be finished when the number of
packets dumped to the file reaches N.
To enable PCAP dumping support to IP pipeline, the compiler option
CONFIG_RTE_PORT_PCAP must be set to 'y'. It is possible to disable this
feature by removing "pcap_file_wr" and "pcap_n_pkt_wr" lines from the
configuration file.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch add PCAP file support to ip_pipeline. Input port type SOURCE
now supports loading specific PCAP file and sends the packets in it to
pipeline instance. The packets are then released by SINK output port. This
feature can be applied by specifying parameters in configuration file as
shown below;
[PIPELINE1]
type = PASS-THROUGH
core = 1
pktq_in = SOURCE0 SOURCE1
pktq_out = SINK0 SINK1
pcap_file_rd = /path/to/eth1.PCAP /path/to/eth2.PCAP
pcap_bytes_rd_per_pkt = 0 64
The configuration section "pcap_file_rd" contains full path and name of
the PCAP file to be loaded. If multiple SOURCEs exists, each shall have
its own PCAP file path listed in this section, separated by spaces.
Multiple SOURCE ports may share same PCAP file to be copied.
The configuration section "pcap_bytes_rd_per_pkt" contains integer value
and indicates the maximum number of bytes to be copied from each packet
in the PCAP file. If this value is "0", all packets in the file will be
copied fully; if the packet size is smaller than the assigned value, the
entire packet is copied. Same as "pcap_file_rd", every SOURCE shall have
its own maximum copy byte number.
To enable PCAP support to IP pipeline, the compiler option
CONFIG_RTE_PORT_PCAP must be set to 'y'. It is possible to disable PCAP
support by removing "pcap_file_rd" and "pcap_bytes_rd_per_pkt" lines
from the configuration file.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch adds link identification feature to packet framework. To
identify a link, user can use both existing port-mask option, or specify
PCI device in every LINK section in the configuration file.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch fixes build errors on linux kernels such as
SuSE 11-SP2/3(64 bits), etc.
Error Log:
error: implicit declaration of function 'WIFEXITED'
error: implicit declaration of function 'WEXITSTATUS'
Fixes: ed0b2d020159 ("examples/ip_pipeline: add more ports")
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Up till now pipeline was bound to thread selected in the initial config.
This patch allows binding pipeline to other threads at runtime using CLI
commands.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch allows parser to read promisc entry from
the LINK section defined in configuration file. It
is an optional parameter: if present, value should
be read (yes/no, on/off), else the value is the
default value (i.e. 1 = promiscuous mode on)
Example of config file:
[LINK0]
promisc = no; optional parameter, default value is “yes”
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch adds parse_hex_string function to parse hex string to uint8_t
array.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add integrated MP/MC and fragmentation/reassembly support to SWQs
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch fixes parsing value of core variable in pipeline config.
Before not every combination of cores (c), sockets (s) and
hyperthreading (h) was parsed correctly.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
New syntax of config files is needed for ip_pipeline example
enhancements. Some old files are temporarily disabled in the Makefile.
It is part of a bigger change.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
