Further enhancements to the userspace ethtool implementation that was
submitted in 2.1 and packaged as a self-contained sample application.
Implements an rte_ethtool shim layer based on rte_ethdev API, along
with a command prompt driven demonstration application.
Signed-off-by: Remy Horton <remy.horton@intel.com>
This patch creates a new sample applicaiton based off the l2fwd
application which performs specified crypto operations on IP packet
payloads which are forwarding.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Add a sample application that acts as a PTP slave using the
DPDK ieee1588 functions.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: John McNamara <john.mcnamara@intel.com>
This patch creates the virtio devices management mechanism.
These functions are from the vHost example, which include:
- virtio device creation.
- virtio device destroying.
- virtio device maintenance.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
[Thomas: remove unused function validate_nb_devices()]
[Thomas: add maintainers section]
Do not compile these examples if the related dpdk option is not
enabled, as it's done for other examples. It allows to build
the examples directory with a reduced dpdk configuration.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This app demonstrate usage of new rte_jobstats library.
It is basically the orginal l2fwd with following modifications to met
library requirements:
- main_loop() was split into two jobs: forward job and flush job. Logic
for those jobs is almost the same as in original application.
- stats is moved to rte_alarm callback to not introduce overhead of
printing.
- stats are expanded to show rte_jobstats statistics.
- added new parameter '-l' to automatic thousands separator.
Comparing original l2fwd and l2fwd-jobstats apps will show approach what
is needed to properly write own application with rte_jobstats
measurements.
New available statistics:
- Total and % of fwd and flush execution time
- management time - overhead of rte_timer + overhead of rte_jobstats
library
- Idle time and % of time spent waiting for fwd or flush to be ready to
execute.
- per job execution time and period.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Example showing how callbacks can be used to insert a timestamp
into each packet on RX. On TX the timestamp is used to calculate
the packet latency through the app, in cycles.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch removes all references to RTE_MBUF_REFCNT, setting the refcnt
field in the mbuf struct permanently.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch contains an example for link bonding mode 6.
It interact with user by a command prompt. Available commands are:
Start - starts ARP_thread which respond to ARP_requests and sends
ARP_updates (this
Is enabled by default after startup),
Stop -stops ARP_thread,
Send count ip - send count ARP requests for IP,
Show - prints basic bond information, like IPv4 statistics from clients
Help,
Quit.
The best way to test mode 6 is to use this example together with
previous patch:
[PATCH 3/4] bond: add debug info for mode 6 link bonding.
Connect clients thru switch to bonding machine and send:
arping -c 1 bond_ip or
generate IPv4 traffic to bond_ip (IPv4 traffic from different clients
should be then balanced on slaves in round robin manner).
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This new app makes use of the librte_reorder library.
It requires at least 3 lcores for RX, Workers (1 or more) and TX threads.
Communication between RX-Workers and Workers-TX is done by using rings.
The flow of mbufs is the following:
* RX thread gets mbufs from driver, set sequence number and enqueue
them in ring.
* Workers dequeue mbufs from ring, do some 'work' and enqueue mbufs in
ring.
* TX dequeue mbufs from ring, inserts them in reorder buffer, drains
mbufs from reorder and sends them to the driver.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
[Thomas: add in examples/Makefile]
For launching CLI thread and Monitor thread and initialising
resources.
Requires a minimum of two lcores to run, additional cores specified by eal core
mask are not used.
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This is a very simple example app for doing packet forwarding with the
Intel DPDK. It's designed to serve as a start point for people new to
the Intel DPDK and who want to develop a new app.
Therefore it's meant to:
* have as good a performance out-of-the-box as possible, using the
best-known settings for configuring the PMDs, so that any new apps can
be based off it.
* be kept as short as possible to make it easy to understand it and get
started with it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
A new sample app that shows the usage of the distributor library. This
app works as follows:
* An RX thread runs which pulls packets from each ethernet port in turn
and passes those packets to worker using a distributor component.
* The workers take the packets in turn, and determine the output port
for those packets using basic l2forwarding doing an xor on the source
port id.
* The RX thread takes the returned packets from the workers and enqueue
those packets into an rte_ring structure.
* A TX thread pulls the packets off the rte_ring structure and then
sends each packet out the output port specified previously by the worker
* Command-line option support provided only for portmask.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Those files will be refactored in subsequent patches to form user space
vhost library.
Makefile and main.h are removed.
main.c is renamed to vhost_rxtx.c and will provide vring enqueue/dequeue API.
virtio-net.h is renamed to rte_virtio_net.h which is the API header file.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
[Thomas: remove from examples Makefile and merge file renaming]
It seems that RTE_MBUF_SCATTER_GATHER is not the proper name for the
feature it provides. "Scatter gather" means that data is stored using
several buffers. RTE_MBUF_REFCNT seems to be a better name for that
feature as it provides a reference counter for mbufs.
The macro RTE_MBUF_SCATTER_GATHER is poisoned to ensure this
modification is seen by drivers or applications using it.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When adding this packet framework sample (commit 77a3346),
it has been forgotten to add it into the global makefile for
"make examples".
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Do not try to build Linux examples in a BSD environment.
Reported-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Demonstrates the use of the ACL library in the DPDK application to
implement packet classification and L3 forwarding.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
[Thomas: some code-style changes]
The "default" part in configuration filenames is misleading.
Rename this as "native", as this is the RTE_MACHINE that is set in these files.
This should make it clearer for people who build DPDK on a system then run it on
another one.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
It is now possible to build all examples by doing the following:
user@droids:~/dpdk.org$ cd examples
user@droids:~/dpdk.org/examples$ make RTE_SDK=${PWD}/.. \
RTE_TARGET=x86_64-default-linuxapp-gcc
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
