The testpmd application provides two sets of commands for RX offload
flags configuration. The purpose of this patch is to eliminate this
duplication by removing the old set of commands:
“port config all crc-strip|scatter|rx-cksum|rx-timestamp|hw-vlan|
hw-vlan-filter|hw-vlan-strip|hw-vlan-extend on|off”
The other commands set that can be used instead in order to enable
or disable the same RX offloading flags on all RX queues of a port is:
"port config <port_id> rx_offload crc_strip|scatter|ipv4_cksum|
udp_cksum|tcp_cksum|timestamp|vlan_strip|vlan_filter|vlan_extend on|off"
This patch also fixes the "drop-en" command, which enables packets
dropping on all RX queues of all ports when no receive buffers available
“port config all drop-en on|off”
Fixes: 384161e006 ("app/testpmd: adjust on the fly VLAN configuration")
Cc: stable@dpdk.org
Signed-off-by: Flavia Musatescu <flavia.musatescu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
It's possible that the mcsunlock occurs before the test_mcslock_try has
a chance to execute, which will result in the trylock being successful,
making the test case fail. Fix this by waiting until all lcores have
completed their test before unlocking the master lock.
Fixes: 32dcb9fd2a ("test/mcslock: add MCS queued lock unit test")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
On receiving signal, testpmd showing warning as
"LATENCY_STATS: failed to remove Rx/Tx callback"
because rte_latencystats_uninit is called without
checking if latencystats is enabled or not.
After this fix, rte_latencystats_uninit will be
called only if latencystats is enabled.
Fixes: 62d3216d61 ("app/testpmd: add latency statistics calculation")
Cc: stable@dpdk.org
Signed-off-by: Amit Gupta <agupta3@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Returned value from rte_bbdev_enc_op_alloc_bulk not checked consistently.
Coverity issue: 344986
Fixes: d819c08327 ("app/bbdev: update for 5GNR")
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
rte_panic causes a backtrace (which is uniformative since all
these calls are in main). Instead use rte_exit and try and make the
messages informative.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since testpmd has several issues which keep it from working correctly
as a secondary process; abort if user tries to do it, rather than
running into later problems.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since testpmd registers log type after processing command
line arguments, it is not possible to do:
# testpmd --log-level='testpmd:info' ...
Fix this by initializing logtype first.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
There should not be blank lines at end of files.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Currently many unit tests fail when running tests under shared builds.
This happens because of missing driver dependencies. This is fixed by
explicitly linking in missing drivers for the test application.
before and after (clang):
https://travis-ci.com/Maickii/dpdk-2/jobs/212329160#L623https://travis-ci.com/Maickii/dpdk-2/jobs/212335912#L620
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Michael Santana <msantana@redhat.com>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Following removal of -c and -n options, the array should have been
shrunk to avoid launch_proc to access unitialised strings.
Fixes: b4dbacdb1a ("test/eal: set core mask/list config only in dedicated test")
Fixes: 501fa9a402 ("test/eal: set memory channel config only in dedicated test")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Michael Santana <msantana@redhat.com>
The tests do not depend on ixgbe or i40e drivers, just remove this
explicit link that likely comes from a copy/paste from testpmd.
Fixes: b5dc795a8a ("test: build app with meson as dpdk-test")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
The unit test for the flow classify introduced undefined behavior by using
a corrupted list. Remove these tests as the invalid data is impossible to
detect with the current API.
Fixes: 9c9befea4f ("test: add flow classify unit tests")
Cc: stable@dpdk.org
Signed-off-by: Aaron Conole <aconole@redhat.com>
RCU library now includes stdbool.h header itself.
There is no need to include this header file in RCU user files.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
This patch reduces the memory footprint of tables for the unit test.
Lower memory footprint means the test now passes when trying to allocate
the tables. This patch is mainly to make table_autotest pass in CI.
Signed-off-by: Michael Santana <msantana@redhat.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
eal flag autotest fails when multiple mem size flags are passed to
--socket-mem option irrespective of RTE_MAX_NUMA_NODES and the number of
available sockets on the test system.
Fixes: 45f1b6e868 ("app: add new tests on eal flags")
Cc: stable@dpdk.org
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Vamsi Attunuru <vattunuru@marvell.com>
Tested-by: Vamsi Attunuru <vattunuru@marvell.com>
Currently, the test app is not being installed by default when
built and installed with meson build system. Fix that to enable
installation of the test app alongside other DPDK apps.
Fixes: b5dc795a8a ("test: build app with meson as dpdk-test")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Caught while looking at the rx offloads code.
rx_mode is a global variable for the default rx configuration.
Rename the local rx_mode variable in cmd_set_vf_rxmode_parsed.
Fixes: 7741e4cf16 ("app/testpmd: VMDq and DCB updates")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
In the rather unlikely case where the first segment is too small to
contain an ethernet header, we can't go and directly dereference the
mbuf data buffer.
Using rte_pktmbuf_read is a little more expensive but this is still
acceptable for a debugging feature.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Improve logic:
* to get list of valid devices based on driver id so that to
eliminate unnecessary if check for driver id match in device loop
* loop till 1st device supporting asymmetric feature is found unlike
previous logic which breaks on 1st device
Signed-off-by: Kanaka Durga Kotamarthy <kkotamarthy@marvell.com>
Signed-off-by: Ayuj Verma <ayverma@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch fixes the issue of memory overwrite after the end of
the output buffer by calculating its size as the number of all
segments multipled by the output segment size.
Additionally buffer overflow errors returned by PMD driver are
detected and shown, ending the test.
Also the output buffer size multiplier was increased from 105%
to 110% to allow running the tests on noncompressible files that
expand to over 107% of original size during the compression.
The changes were made in the verification part of the flow and
they don't affect the benchmark results.
Fixes: 424dd6c8c1 ("app/compress-perf: add weak functions for multicore test")
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds extra features to the compress performance
test. Some important parameters (memory allocation,
number of ops, number of segments) are calculated and
printed out.
Information about threads, cores, devices and queue-pairs
is also printed.
Signed-off-by: Artur Trybula <arturx.trybula@intel.com>
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Asymmetric crypto is not required for test-crypto-perf application.
Disabling the feature using 'ff_disable' field.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Shally Verma <shallyv@marvell.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
MAC address parsing was causing failure [1],
this patch partially reverts the commit
commit b5ddce8959 ("app/testpmd: use new ethernet address parser")
[1]
testpmd> flow validate 0 priority 2 ingress group 0 pattern eth dst
is 98:03:9B:5C:D9:00 / end actions queue index 0 / end
Bad arguments
Fixes: b5ddce8959 ("app/testpmd: use new ethernet address parser")
Reported-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Raslan Darawsheh <rasland@mellanox.com>
Some configuration options can not be tested properly with testpmd
because it automatically starts all ports. This makes it harder
to test driver handling of configuration options:
(for example rx_deferred_start).
Add new command line flag --disable-device-start which skips
the device start. The port can then be started manually later.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
With the latest published interface of
rte_eal_hotplug_[add,remove](), and rte_eth_dev_close(),
rte_eth_dev_close() would cleanup all the data structures of
port's eth dev leaving the device common resource intact
if RTE_ETH_DEV_CLOSE_REMOVE is set in dev flags.
So a new command "detach device" (~hotplug remove) to work,
with device identifier like "port attach" is added
to be able to detach closed devices.
Also to display currently probed devices, another command
"show device info <identifier>|all" is also added as a
part of this change.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
GRE key (rte_flow_item_type_gre_key) is also needed in
raw encapsulation/decapsulation.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Open the MPLS's TC and S bits of rte_flow_item_mpls in command line.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch intend to support
action_raw_encap/decap [1] in a generic and convenient way.
Two new commands - set raw_encap, set raw_decap are introduced just
like the other commands for encap/decap, i.e. set vxlan.
These two commands have corresponding global buffers
which can be used by PMD as the input buffer for raw encap/decap.
The commands use the rte_flow pattern syntax to help user build the
raw buffer in a convenient way.
A common way to use it:
- encap matched egress packet with VxLAN tunnel:
testpmd> set raw_encap eth src is 10:11:22:33:44:55 / vlan tci is 1
inner_type is 0x0800 / ipv4 / udp dst is 4789 / vxlan vni
is 2 / end_set
testpmd> flow create 0 egress pattern eth / ipv4 / end actions
raw_encap / end
- decap l2 header and encap GRE tunnel on matched egress packet:
testpmd> set raw_decap eth / end_set
testpmd> set raw_encap eth dst is 10:22:33:44:55:66 / ipv4 / gre
protocol is 0x0800 / end_set
testpmd> flow create 0 egress pattern eth / ipv4 / end actions
raw_decap / raw_encap / end
- decap VxLAN tunnel and encap l2 header on matched ingress packet:
testpmd> set raw_encap eth src is 10:11:22:33:44:55 type is 0x0800 /
end_set
testpmd> set raw_decap eth / ipv4 / udp / vxlan / end_set
testpmd> flow create 0 ingress pattern eth / ipv4 / udp dst is 250 /
vxlan vni is 0x1234 / ipv4 / end actions raw_decap /
raw_encap / queue index 1 / mark id 0x1234 / end
[1] http://mails.dpdk.org/archives/dev/2018-October/116092.html
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The help string of set vxlan*, set nvgre* are in "config" section.
But they actually do not alter NIC or testpmd's configuration and
they will be used by "flow" command later.
Put them in "filters" section along with "flow" command seems more
reasonable.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch updates "show port info [port_id]" command to display
the tx_desc_lim.nb_seg_max and tx_desc_lim.nb_mtu_seg_max fields
of rte_eth_dev_info structure.
Fixes: 4fb7e803eb ("ethdev: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
update unit tests for configuration flexibility of pipe traffic
classes and queues size.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Abraham Tovar <abrahamx.tovar@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
All higher priority traffic classes contain only one queue, thus
remove wrr function for them. The lowest priority best-effort
traffic class conitnue to have multiple queues and packet are
scheduled from its queues using wrr function.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Abraham Tovar <abrahamx.tovar@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
This patch add the support to handle the failure in session
create for wireless related cases. Else it will cause
segment fault due to I/O on un-initialized sessions.
Fixes: b3bbd9e5f2 ("cryptodev: support device independent sessions")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
BT0 block type padding after rfc2313 has been discontinued.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
Asymmetric nature of RSA algorithm suggest to use
additional field for output. In place operations
still can be done by setting cipher and message pointers
with the same memory address.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch adds checking if device support ZUC
algorithms before running ZUC test cases.
It also removes unnecessary checks of digest
appended space and fixes some comments wording.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Use ERR rather than INFO to warn that it's a negative test else
the errors are seen but the warning to expect them isn't.
Also add comment to make it easier to follow code.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
This patch fixes some minor problems like 'magic numbers',
spelling mistakes, enumes naming.
Signed-off-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch adds a possibility to force controlled process termination
as a result of two signals: SIGTERM and SIGINT
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch adds a benchmark part to
compression-perf-tool as a separate test case, which can be
executed multi-threaded.
Also updates release notes.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch adds a verification part to
compression-perf-tool as a separate test case, which can be
executed multi-threaded.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch adds --ptest option to make possible to choose
test case from command line.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch adds template functions for multi-cores performance
version of compress-perf-tool
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
On restarting worker 0 after shutdown, packets handled by
worker 0 must be incremented only when a packet is received by
it.
Fixes: c3eabff124 ("distributor: add unit tests")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: David Hunt <david.hunt@intel.com>
Currently, if there is no procfs mounted, test application will
fail to run any multiprocess-related autotests (EAL flags etc.)
without a clear explanation as to why this happens.
Add a check specifically for that condition, as well as add a
general stringified error message to rte_panic.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Issue is observed while running 'metrics_autotest' continuously
without quiting. During first execution all test cases pass but
second run onwards first test case fails as library is already
initialized.
To resolve, introduced a new API to deinitialise the library
after all test cases are executed.
Fixes: cd38042429 ("test/metrics: add unit tests for metrics library")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Tested-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
