Fail to update SW ptype mapping table when loading
PPP profile, though profile can be loaded successfully.
It will cause fail to parse SW ptype during receiving
packets. This patch fixes this issue.
Fixes: 11556c915a08 ("net/i40e: improve packet type parser")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Using DPDK in Hyper-V VM systems requires vdev_netvsc driver to pair
the NetVSC netdev device with the same MAC address PCI device by
fail-safe PMD.
Add vdev_netvsc custom scan in vdev bus to allow automatic probing in
Hyper-V VM systems unless it was already specified by command line.
Add "ignore" parameter to disable this auto-detection.
Signed-off-by: Matan Azrad <matan@mellanox.com>
This parameter allows specifying any non-NetVSC interface or routed
NetVSC interfaces to use with tap sub-devices for development purposes.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
NetVSC netdevices which are already routed should not be probed because
they are used for management purposes by the HyperV.
prevent routed netvsc devices probing.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
As described in more details in the attached documentation (see patch
contents), this virtual device driver manages NetVSC interfaces in virtual
machines hosted by Hyper-V/Azure platforms.
This driver does not manage traffic nor Ethernet devices directly; it acts
as a thin configuration layer that automatically instantiates and controls
fail-safe PMD instances combining tap and PCI sub-devices, so that each
NetVSC interface is exposed as a single consolidated port to DPDK
applications.
PCI sub-devices being hot-pluggable (e.g. during VM migration),
applications automatically benefit from increased throughput when present
and automatic fallback on NetVSC otherwise without interruption thanks to
fail-safe's hot-plug handling.
Once initialized, the sole job of the vdev_netvsc driver is to regularly
scan for PCI devices to associate with NetVSC interfaces and feed their
addresses to corresponding fail-safe instances.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
This patch lays the groundwork for this driver (draft documentation,
copyright notices, code base skeleton and build system hooks). While it can
be successfully compiled and invoked, it's an empty shell at this stage.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
Previous fail-safe code didn't support probed sub-devices capture and
failed when it tried to probe them.
Skip fail-safe sub-device probing when it already was probed.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
rte_free() is not supposed to work with pointers returned by calloc().
Fixes: a0194d828100 ("net/failsafe: add flexible device definition")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Added missing doxygen for rte_eth_dev_get_sec_ctx
and moved the declaration to the proper place.
Fixes: 4c270218aa26 ("ethdev: support security APIs")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The type_data argument to ef10_rx_qcreate is only used
in builds with EFSYS_OPT_RX_PACKED_STREAM. note this as
an unused argument to avoid warnings in builds without
packed stream support.
Fixes: b749646dade4 ("net/sfc/base: add function to create packed stream RxQ")
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
fix one typo and a grammatical mistake.
Fixes: b0152b1b40fe ("doc: update bonding")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
There are several func calls to rte_zmalloc() which don't do null
pointer check on the return value. And before return, the memory is not
freed. Fix it by adding null pointer check and rte_free().
Fixes: 37f9b54bd3cf ("net/dpaa: support Tx and Rx queue setup")
Fixes: 62f53995caaf ("net/dpaa: add frame count based tail drop with CGR")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Reviewed-by: Shreyansh Jain <shreyansh.jain@nxp.com>
A typo in makefile that makes the RX/TX vector code
not to be compiled.
Fixes: 319c421f3890 ("net/avf: enable SSE Rx Tx")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Even though link of a port gets down, device still can receive traffic.
That is the reason why mlx5_set_link_up/down() switches rx/tx_pkt_burst().
However, if link gets down by an external command (e.g. ifconfig), it isn't
effective. It is better to change burst functions when link status change
is detected.
Fixes: 62072098b54e ("mlx5: support setting link up or down")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
When performing live migration or memory hot-plugging,
the changes to the device and vrings made by message handler
done independently from vring usage by PMD threads.
This causes for example segfaults during live-migration
with MQ enable, but in general virtually any request
sent by qemu changing the state of device can cause
problems.
These patches fixes all above issues by adding a spinlock
to every vring and requiring message handler to start operation
only after ensuring that all PMD threads related to the device
are out of critical section accessing the vring data.
Each vring has its own lock in order to not create contention
between PMD threads of different vrings and to prevent
performance degradation by scaling queue pair number.
See https://bugzilla.redhat.com/show_bug.cgi?id=1450680
Cc: stable@dpdk.org
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
dequeue zero copy change buf_addr and buf_iova of mbuf, and return
to mbuf pool without restore them, it breaks vm memory if others allocate
mbuf from same pool since mbuf reset doesn't reset buf_addr and buf_iova.
Fixes: b0a985d1f340 ("vhost: add dequeue zero copy")
Cc: stable@dpdk.org
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
When live migration is done, for the backup VM, either the virtio
frontend or the vhost backend needs to send out gratuitous RARP packet
to announce its new network location.
This patch enables VIRTIO_NET_F_GUEST_ANNOUNCE feature to support live
migration scenario where the vhost backend doesn't have the ability to
generate RARP packet.
Brief introduction of the work flow:
1. QEMU finishes live migration, pokes the backup VM with an interrupt.
2. Virtio interrupt handler reads out the interrupt status value, and
realizes it needs to send out RARP packet to announce its location.
3. Pause device to stop worker thread touching the queues.
4. Inject a RARP packet into a Tx Queue.
5. Ack the interrupt via control queue.
6. Resume device to continue packet processing.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Due to a mistake operation from me, older version (v10) was merged to
master branch. It's the v11 should be applied. However, the master branch
is not rebase-able. Thus, this patch is made, from the diff between v10
and v11.
The diffs are:
- Add check for parameter and tailroom in rte_net_make_rarp_packet
- Allocate mbuf in rte_net_make_rarp_packet
Besides that, a link error is fixed when shared lib is enabled.
Fixes: 45ae05df824c ("net: add a helper for making RARP packet")
Fixes: c3ffdba0e88a ("vhost: use API to make RARP packet")
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Yuanhan Liu <yliu@fridaylinux.org>
When vhost reallocate dev and vq for NUMA enabled case, it doesn't perform
deep copy, which lead to 1) zmbuf list not valid 2) remote memory access.
This patch is to re-initlize the zmbuf list and also do the deep copy.
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Reviewed-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
This patch removes all references to old-style offload API
replacing them with new offload flags.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Since DPDK restores ether address configuration after device
is started it is safe to add ether address to uninitialized port (ppio).
Fixes: c0511a8f741f ("net/mrvl: check if ppio is initialized")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
DPDK updates MTU once mtu_set() callback returns success.
Since PMD changes port's MTU to dev->mtu every time device is
started it is safe to call mtu_set() before MUSDK ppio was initialized.
Fixes: c0511a8f741f ("net/mrvl: check if ppio is initialized")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
This commit support the new Tx offloads API.
The code which fills in txq_flags in default_txconf is preserved
because rte_eth_dev_info_get() lacks conversion between offloads
and txq_flags fields which means that a legacy application which
relies on default_txconf will fail to configure Tx queues in the
case when some bits in txq_flags are mandatory.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The patch adds a separate function to report supported
Tx capabilities because this function will be required
in more places across the code in the upcoming patches.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Ethdev Rx offloads API has changed since:
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
This commit support the new Rx offloads API.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The patch adds a separate function to report supported
Rx capabilities because this function will be required
in more places across the code in the upcoming patches.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Commonly, drivers converted to the new offload API
may need to log unsupported offloads as a response
to wrong settings. From this perspective, it would
be convenient to have generic functions to look up
offload names. The patch adds such a helper for Tx.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Commonly, drivers converted to the new offload API
may need to log unsupported offloads as a response
to wrong settings. From this perspective, it would
be convenient to have generic functions to look up
offload names. The patch adds such a helper for Rx.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
RSS is a local variable with address which is never NULL.
Fixes: d77d07391d4d ("net/sfc: support flow API RSS action")
Cc: stable@dpdk.org
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The rte_flow is already filled in with zeros in the
case of create. So memset() with zeros is needed only
in validation.
Fixes: a9825ccf5bb8 ("net/sfc: support flow API filters")
Cc: stable@dpdk.org
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Ethdev Rx offloads API has changed since:
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
This commit adds support for the new Rx offloads API.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
This commit adds support for the new Tx offloads API.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
Ethdev Rx offloads API has changed since:
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
This commit support the new Rx offloads API.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
This commit support the new Tx offloads API. Queue configuration
is stored in ena_ring.offloads. During preparing mbufs for tx, offloads are
allowed only if appropriate flags in this field are set.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
There are parameters that are not copy from
spec to verbs structure in the vtc_label
Fixes: 43e9d9794cde ("net/mlx5: support upstream rdma-core")
Cc: stable@dpdk.org
Signed-off-by: Shachar Beiser <shacharbe@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Increase the internal limit for flow types from 32 to 64
to support future flow type extensions.
Change type of variables from uint32_t[] to uint64_t[]:
rte_eth_fdir_info.flow_types_mask
rte_eth_hash_global_conf.sym_hash_enable_mask
rte_eth_hash_global_conf.valid_bit_mask
This modification affects the following components:
net/i40e
net/ixgbe
app/testpmd
ABI versioning used to keep ABI stability.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
With bonding, after sending sufficient ipv4 packets,
bond_ethdev_rx_burst_8023ad() no longer recognizes LACP packets
because the packet_type is set to RTE_PTYPE_L3_IPV4.
Ensure packet_type is reset for non-ipv4 packets in vmxnet3_rx_offload.
Signed-off-by: George Wilkie <george.wilkie@intl.att.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
Move setting PCType after setting port's MAC type, which can resolve
the issue of PCType doesn't take effect on X722.
Fixes: a286ebeb0714 ("net/i40e: add dynamic mapping of SW flow types to HW pctypes")
Cc: stable@dpdk.org
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Current flag is in wrong byte order for i40e_aq_mac_address_write,
and just uses the well defined macro instead.
Fixes: e18e01e92c29 ("i40e: support default MAC address setting")
Cc: stable@dpdk.org
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add note about PMD expects the network interfaces provided to be up,
documented behavior to set expectations right.
Also added minor fix.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Ethdev Rx offloads API has changed since:
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
This commit adds support for the new Rx offloads API.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
This commit adds support for the new Tx offloads API.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Enabling hash results in FD requires setting DPNI_FLCTYPE_HASH in
dpni_set_offload API. Setting this FLCTYPE for DPNI sets the FD[SC]
to 0 for LS2 in the hardware thus disabling data/annotation stashing.
For LX2 this is fixed in hardware and thus hash result and parse
results can be received in FD using this option.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
