Implementation includes following limitations:
1) Packet's header length must be less than 256 (SFC_TSOH_STD_LEN);
2) Offset of the TCP header must be less than 208
(EF10_TCP_HEADER_OFFSET_LIMIT);
3) Number of Tx descriptors must be not less than number of descriptors
needed for TSO settings plus header plus one data segment.
If above conditions are not met, the packet is dropped.
If the maximum descriptor space is insufficient to hold entire TSO packet,
only a part of the packet is sent.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
There are two function that call sfc_tx_qfini():
sfc_tx_fini_queues() and sfc_tx_queue_release(). But only
sfc_tx_queue_release() sets tx_queues pointer of the device data to NULL.
It may lead to the scenario in which a queue is destroyed by
sfc_tx_fini_queues() and after the queue is attempted to be destroyed again
by sfc_tx_queue_release().
Move NULL assignment to sfc_tx_qfini().
Fixes: b1b7ad933b ("net/sfc: set up and release Tx queues")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
If application uses Tx offload API and sets ETH_TXQ_FLAGS_IGNORE flag,
it still should have inner TCP/UDP checksum offload enabled if it is
supported and TCP/UDP checksum offload is requested.
Fixes: c78d280e88 ("net/sfc: convert to new Tx offload API")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch check if a input requested offloading is valid or not.
Any reuqested offloading must be supported in the device capabilities.
Any offloading is disabled by default if it is not set in the parameter
dev_conf->[rt]xmode.offloads to rte_eth_dev_configure() and
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If any offloading is enabled in rte_eth_dev_configure() by application,
it is enabled on all queues no matter whether it is per-queue or
per-port type and no matter whether it is set or cleared in
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If a per-queue offloading hasn't be enabled in rte_eth_dev_configure(),
it can be enabled or disabled for individual queue in
ret_eth_[rt]x_queue_setup().
A new added offloading is the one which hasn't been enabled in
rte_eth_dev_configure() and is reuqested to be enabled in
rte_eth_[rt]x_queue_setup(), it must be per-queue type,
otherwise trigger an error log.
The underlying PMD must be aware that the requested offloadings
to PMD specific queue_setup() function only carries those
new added offloadings of per-queue type.
This patch can make above such checking in a common way in rte_ethdev
layer to avoid same checking in underlying PMD.
This patch assumes that all PMDs in 18.05-rc2 have already
converted to offload API defined in 17.11 . It also assumes
that all PMDs can return correct offloading capabilities
in rte_eth_dev_infos_get().
In the beginning of [rt]x_queue_setup() of underlying PMD,
add offloads = [rt]xconf->offloads |
dev->data->dev_conf.[rt]xmode.offloads; to keep same as offload API
defined in 17.11 to avoid upper application broken due to offload
API change.
PMD can use the info that input [rt]xconf->offloads only carry
the new added per-queue offloads to do some optimization or some
code change on base of this patch.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Medford2 uses a configurable VI window size, and requires
updates to register accesses to use a runtime VI window size
rather than the *_STEP register constants used for earlier
controllers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Conversion to dynamic logging done in the previous patches
makes it possible to simplify internal controls for init
logging. This patch allows to prepare for such a change.
It makes init-unrelated messages use NOTICE level so that
the following patch will be able to convert init logging
to use INFO level and remain silent by default.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
This commit support the new Tx offloads API.
The code which fills in txq_flags in default_txconf is preserved
because rte_eth_dev_info_get() lacks conversion between offloads
and txq_flags fields which means that a legacy application which
relies on default_txconf will fail to configure Tx queues in the
case when some bits in txq_flags are mandatory.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The patch adds a separate function to report supported
Tx capabilities because this function will be required
in more places across the code in the upcoming patches.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The number of Tx descriptors is not used as HW Tx ring size any more.
It simply defines maximum fill level.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Prepare to support more options for number of Tx descriptors.
libefx-based datapath is updated just for completeness to
make code more readable and less error-prone.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
EFX_TXQ_LIMIT is libefx-specifics and it should not be used
for other Tx datapaths implementations (e.g. EF10 native).
EF10 native Tx datapath has its own understanding of the maximum
TxQ fill level imposed by EvQ clear strategy and space reserved
for Tx error and flush events.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
There is no dedicated controls for inner checksum offload on
device/queue level. So, enable together with outer offloads.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Tx queue prefetch, host and writeback thresholds are used for
performance fine-tuning and not applicable to Solarflare NICs.
It is safe to just log warning and do not fail Tx queue setup
to be more friendly to DPDK applications which hardcode it.
Fixes: b1b7ad933b ("net/sfc: set up and release Tx queues")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Support for the feature is added to EFX Tx datapath
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Instead of many PMD define their own macro, define a generic one in
ethdev and use that in PMDs.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Fixes: a8ad8cf83f ("net/sfc: provide basic stubs for Tx subsystem")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Prepare to fix device reconfigure. Make it clear that corresponding
functions should be called on device configure and close operations.
No functional change.
Fixes: a8ad8cf83f ("net/sfc: provide basic stubs for Tx subsystem")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
EvQ info array keeps information about EvQ centralized, however
EvQ pointers are available in TxQ and RxQ structures. Single
array for all EvQs complicates device reconfigure handling, so
simply git rid of it.
It removes notion of EvQ software index since there is no EvQ
array in software any more.
Fixes: 58294ee65a ("net/sfc: support event queue")
Fixes: 9a75f75cb1 ("net/sfc: maintain management event queue")
Fixes: ce35b05c63 ("net/sfc: implement Rx queue setup release operations")
Fixes: 28944ac098 ("net/sfc: implement Rx queue start and stop operations")
Fixes: b1b7ad933b ("net/sfc: set up and release Tx queues")
Fixes: fed9aeb46c ("net/sfc: implement transmit path start / stop")
Fixes: 3b809c27b1 ("net/sfc: support link status change interrupt")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
The index of an event queue index is computed from the index of the
corresponding transmit or receive queue, and depends on the total
number of receive queues. As a consequence, the index of an event
queue bound to a transmit queue changes if the total number of
receive queues is changed.
Fixes: 58294ee65a ("net/sfc: support event queue")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
If Tx datapath does not support TSO, TSO was dropped on device configure.
It is incorrect to change advertised offloads.
Fixes: 7a4d44a639 ("net/sfc: make TSO a datapath-dependent feature")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Split control and datapath to make datapath substitutable and
possibly reusable with alternative control path.
libefx-based Tx datapath is bound to libefx control path, but
it should be possible to use other datapaths with alternative
control path(s).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
EF10 supported by the PMD has no limitations on address boundary
crossing by Tx DMA descriptors.
Fixes: 428c7ddd2f ("net/sfc: send bursts of packets")
Fixes: fec33d5bb3 ("net/sfc: support firmware-assisted TSO")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The number of Tx queues requested by the user must not be overridden;
instead, the limits imposed by TSO must be applied to the advertised
maximum
Fixes: fec33d5bb3 ("net/sfc: support firmware-assisted TSO")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Remove RTE_LIBRTE_SFC_EFX_TSO config option since it is not
required any more:
- unreasonable limit on number of Tx queues when TSO is not
actually required should be solved using per-device parameter
- performance difference with and without TSO compiled in is small
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Mark Spender <mspender@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
