Add the ability for the upper layer to query RX/TX queue information.
Add into rte_eth_dev_info new fields to represent information about
RX/TX descriptors min/max/alig nnumbers per queue for the device.
Add new structures:
struct rte_eth_rxq_info
struct rte_eth_txq_info
new functions:
rte_eth_rx_queue_info_get
rte_eth_tx_queue_info_get
into rte_etdev API.
Left extra free space in the queue info structures,
so extra fields could be added later without ABI breakage.
Add new fields:
rx_desc_lim
tx_desc_lim
into rte_eth_dev_info.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch adds one new API to get dcb related info.
rte_eth_dev_get_dcb_info
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Different NIC has its specific constraint on the multi-queue
configuration, so move the checking from ethdev lib to drivers.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Old flow director API have been replaced by rte_eth_dev_filter_ctrl
since release 2.0. And no driver in current code support these functions.
All the removed functions are listed below:
- rte_eth_dev_fdir_add_perfect_filter;
- rte_eth_dev_fdir_add_signature_filter;
- rte_eth_dev_fdir_get_infos;
- rte_eth_dev_fdir_remove_perfect_filter;
- rte_eth_dev_fdir_remove_signature_filter;
- rte_eth_dev_fdir_set_masks;
- rte_eth_dev_fdir_update_perfect_filter;
- rte_eth_dev_fdir_update_signature_filter;
The library version was already incremented in a previous patch.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
[Thomas: fix mlx4 and update release notes]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The Rx interrupt feature is now part of the standard ABI.
Because of changes in rte_intr_handle and struct rte_eth_conf,
the eal and ethdev library versions are incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
To obtain detachable flag, pci_drv is accessed in rte_eth_dev_is_detachable().
But pci_drv is only valid if port is enabled. Not to cause illegal access,
add rte_eth_dev_is_valid_port() before accessing.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The patch adds two dev_ops functions to enable and disable rx queue
interrupts.
In addition, it adds rte_eth_dev_rx_intr_ctl/rx_intr_q to support
per port or per queue rx intr event set.
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Found by coccinelle script.
If rte_zmalloc() failed in rte_eth_dev_callback_register
then NULL pointer would be dereferenced.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
[Thomas: restore pointer comparison style]
The function rte_eth_dev_is_valid_port is good way to have all
drivers using same function and solves several hotplug related
bugs from drivers not checking attached flag.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
There are close and detach functions in ethdev.
To keep a consistent naming, PCI functions called by ethdev detach
must be named "detach" instead of "close".
Fix also comments which mix close and uninit names.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Remove non generic stats in rte_stats_strings and mark the relevant
fields in struct rte_eth_stats as deprecated.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Extend rte_eth_xstats_get to retrieve additional stats from the device
driver as well the ethdev generic stats.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
add new apis:
- rte_eth_dev_get_reg_length
- rte_eth_dev_get_reg_info
- rte_eth_dev_get_eeprom_length
- rte_eth_dev_get_eeprom
- rte_eth_dev_set_eeprom
to enable reading device parameters (register and
eeprom) based upon ethtool alike data parameter specification.
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add new api:
- rte_eth_dev_default_mac_addr_set
The new api, rte_eth_dev_default_mac_addr_set, uses the
existing dev_op, mac_addr_set, to enable setting mac
addr from ethdev level.
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Fix return value, using the macro input instead of -EINVAL.
Fixes: 75acd57ad025 ("ethdev: introduce valid port helper")
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Change the order that user supplied RX and TX callbacks are called
to the order that they were added (fifo).
The previous calling order was the reverse of this (lifo) and was
counter intuitive for users.
Suggested-by: Robert Sanford <rsanford@akamai.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Add ethdev API to enable and read IEEE1588/802.1AS PTP timestamps
from devices that support it. The following functions are added:
rte_eth_timesync_enable()
rte_eth_timesync_disable()
rte_eth_timesync_read_rx_timestamp()
rte_eth_timesync_read_tx_timestamp()
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
[Thomas: merged with new macro VALID_PORTID_OR_ERR_RET]
This patch removes CONFIG_RTE_LIBRTE_EAL_HOTPLUG option, and enables it
as default in both Linux and BSD.
Also, to support port hotplug, rte_eal_pci_scan() and below missing
symbols should be exported to ethdev library.
- rte_eal_parse_devargs_str()
- rte_eal_pci_close_one()
- rte_eal_pci_probe_one()
- rte_eal_pci_scan()
- rte_eal_vdev_init()
- rte_eal_vdev_uninit()
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
The patch consolidates below functions, and implemented in common
eal code.
- pci_map_device()
- pci_unmap_device()
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
This path renames the mirror type in rte_eth_mirror_conf and macros,
and rework the mirror set in ixgbe drivers by using new definition.
It also fixes some coding style.
Test report: http://dpdk.org/ml/archives/dev/2015-June/019118.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Rename rte_eth_vmdq_mirror_conf to rte_eth_mirror_conf and move
the maximum rule id check from ethdev level to driver.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The code pattern is repeated so many times, it is a good
idea to introduce template like other code here uses.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This fixes lots of complaints from checkpatch about whitespace
and other non-material things. Important to fix the old code now
befor more code does copy/paste of same junk.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since rte_eth_devices is in BSS, the address of rte_eth_devices
plus port_id can not ever be NULL for a valid port_id number.
Remove this unnecessary check and fix the code style.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Statistics offsets in the rte_stats_strings[] array are always 64-bit aligned.
However, the compiler is unaware of this fact and complains on -Wcast-align.
This patch modifies the code to use RTE_PTR_ADD(), thereby silencing the
compiler by casting through (void *).
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
With the current PMD API, the receipt of multicast packets on a given
port can only be enabled by invoking the "rte_eth_allmulticast_enable"
function.
This method may not work on Virtual Functions in SR-IOV architectures
when the host PF driver does not allow such operation on VFs.
In such cases, joined multicast addresses must be individually added
in the set of multicast addresses that are filtered by the [VF] port.
For this purpose, a new function "set_mc_addr_list" is introduced
into the set of functions that are exported by a Poll Mode Driver.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: export new function in .map]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
eth_stats is already cleared by rte_eth_stats_get
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This code retrieving the pool private area is duplicated in many
places, we can use of function for it.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The Linux style is not to put extra useless paren's around
the expression passed to return statement.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The statistics tables and null mac address should be immutable.
Fix up get_addr routines to accept const args.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
There is no reason to inline functions that are not in the critical
path.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Kernel driver (kdrv) seems easier to understand than
passthrough driver (pt_driver). It's also more generic
as a PMD could run on top of any PCI kernel driver if
it would offer such support.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Added a parameter to the RX callback to pass in the number of
available RX packets in addition to the number of dequeued packets.
This provides the RX callback functions with additional information
that can be used to decide how packets from a burst are handled.
The TX callback doesn't require this additional parameter so the RX
and TX callbacks no longer have the same function parameters. As such
the single RX/TX callback has been refactored into two separate callbacks.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The data structure for the rx and tx callbacks is local to each process
since it contains function pointers and cannot be shared between
different unique binaries. However, because it is not in
rte_eth_dev_data structure, the array is not getting initialized for
secondary processes - neither is it getting appropriately resized if the
number of RX/TX queues changes. This causes crashes in secondary
processes as they dereference a null pointer in struct rte_eth_dev.
This patch fixes this by introducing an upper-bound on the number of
queues per port that can be configured, and then uses this to make the
array statically sized, thereby avoiding the crashes.
Fixes: 4dc294158cac ("ethdev: support optional Rx and Tx callbacks")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The pointer to struct eth_driver is not used and is already set
in struct rte_eth_dev.
It's a small cleanup in PMD API which probably needs more
attention to make clear what is a driver, a PCI driver, an
ethernet driver, etc.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch modifies testpmd behavior when setting:
rx_vlan add all vf_port (enabling all vlanids
to be passed thru rx filter on VF).
Rx_vlan_all_filter_set() function,
checks if the next vlanid can be enabled by the driver.
Number of vlanids is limited by the NIC and thus the NIC
do not allow to enable more vlanids than it can allocate
in VFTA table.
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Some checks with rte_eth_dev_is_valid_port() were missed when merging
hotplug and callbacks features.
Fixes: c282abd2a6cd ("ethdev: remove assumption that port will not be detached")
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch fixes following errors with icc.
error #188: enumerated type mixed with another type
return -1;
Fixes: 92d94d3744d7 ("ethdev: attach or detach port")
Reported-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: John McNamara <john.mcnamara@intel.com>
After setting CONFIG_RTE_LIBRTE_EAL_HOTPLUG=n, GCC stop compiling:
rte_ethdev.c:430:1: error: ‘rte_eth_dev_get_device_type’ defined but not used
rte_ethdev.c:438:1: error: ‘rte_eth_dev_save’ defined but not used
rte_ethdev.c:450:1: error: ‘rte_eth_dev_get_changed_port’ defined but not used
rte_ethdev.c:464:1: error: ‘rte_eth_dev_get_addr_by_port’ defined but not used
rte_ethdev.c:481:1: error: ‘rte_eth_dev_get_name_by_port’ defined but not used
rte_ethdev.c:503:1: error: ‘rte_eth_dev_is_detachable’ defined but not used
The hotplug option allows to build in environment (BSD) not yet
supported by this new feature.
It should be removed when BSD will be supported.
Waiting this day, let's fix build with hotplug disabled.
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
These functions are used for attaching or detaching a port.
When rte_eth_dev_attach() is called, the function tries to realize the
device name as pci address. If this is done successfully,
rte_eth_dev_attach() will attach physical device port. If not, attaches
virtual devive port.
When rte_eth_dev_detach() is called, the function gets the device type
of this port to know whether the port is come from physical or virtual.
And then specific detaching function will be called.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
This new parameter is needed to keep device type like PCI or virtual.
Port detaching processes are different between PCI device and virtual
device.
RTE_ETH_DEV_PCI indicates device type is PCI. RTE_ETH_DEV_VIRTUAL
indicates device is virtual.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
The patch adds function pointer to rte_pci_driver and eth_driver
structure. These function pointers are used when ports are detached.
Also, the patch adds rte_eth_dev_uninit(). So far, it's not called
by anywhere, but it will be called when port hotplug function is
implemented.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
This patch adds rte_eth_dev_release_port(). The function is used for
changing an attached status of the device that has specified name.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
To remove assumption, do like followings.
This patch adds "RTE_PCI_DRV_DETACHABLE" to drv_flags of rte_pci_driver
structure. The flags indicate the driver can detach devices at runtime.
Also, remove assumption that port will not be detached.
To remove the assumption.
- Add 'attached' member to rte_eth_dev structure.
This member is used for indicating the port is attached, or not.
DEV_ATTACHED indicates a port is attached.
DEV_DETACHED indicates a port is detached.
- Add rte_eth_dev_allocate_new_port().
This function is used for allocating new port.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add optional support for inline processing of packets inside the RX
or TX call. For an RX callback, what happens is that we get a set of
packets from the NIC and then pass them to a callback function, if
configured, to allow additional processing to be done on them, e.g.
filling in more mbuf fields, before passing back to the application.
On TX, the packets are similarly post-processed before being handed
to the NIC for transmission.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The 'callbacks' member of the rte_eth_dev structure has been renamed
to 'link_intr_cbs' to make it clear that it refers to callbacks from
NIC interrupts. This allows us to add other types of callbacks to
the structure without ambiguity.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
