Replace master lcore with main lcore and
replace slave lcore with worker lcore.
Keep the old functions and macros but mark them as deprecated
for this release.
The "--master-lcore" command line option is also deprecated
and any usage will print a warning and use "--main-lcore"
as replacement.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add command line parameter:
--rxoffs=X[,Y]
Sets the offsets of packet segments from the beginning of the
receiving buffer if split feature is engaged. Affects only the
queues configured with split offloads (currently BUFFER_SPLIT
is supported only).
Add interactive mode command, providing the same:
testpmd> set rxoffs (x[,y]*)
Where x[,y]* represents a CSV list of values, without white space.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add command line parameter:
--rxpkts=X[,Y]
Sets the length of segments to scatter packets on receiving if split
feature is engaged. Affects only the queues configured with split
offloads (currently BUFFER_SPLIT is supported only).
Add interactive mode command:
testpmd> set rxpkts (x[,y]*)
Where x[,y]* represents a CSV list of values, without white space.
Sets the length of segments to scatter packets on receiving if split
feature is engaged. Affects only the queues configured with split
offloads (currently BUFFER_SPLIT is supported only). Optionally the
multiple memory pools can be specified with --mbuf-size command line
parameter and the mbufs to receive will be allocated sequentially
from these extra memory pools.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The command line parameter --mbuf-size is updated, it can handle
the multiple values like the following:
--mbuf-size=2176,512,768,4096
specifying the creation the extra memory pools with the requested
mbuf data buffer sizes. If some buffer split feature is engaged
the extra memory pools can be used to configure the Rx queues
with rte_the_dev_rx_queue_setup_ex().
The extra pools are created with requested sizes, and pool names
are assigned with appended index: mbuf_pool_socket_%socket_%index.
Index zero is used to specify the first mandatory pool to maintain
compatibility with existing code.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
A new parameter `hairpin-mode` is introduced to the testpmd command
line. Bitmask value is used to provide a more flexible configuration.
This parameter should be used when `hairpinq` is specified in the
command line.
Bit 0 in the LSB indicates the hairpin will use the loop mode. The
previous port Rx queue will be connected to the current port Tx
queue.
Bit 1 in the LSB indicates the hairpin will use pair port mode. The
even index port will be paired with the next odd index port. If the
total number of the probed ports is odd, then the last one will be
paired to itself.
If this byte is zero, then each port will be paired to itself.
Bit 0 takes a higher priority in the checking.
Bit 4 in the second bytes indicate if the hairpin will use explicit
Tx flow mode.
e.g. in the command line, "--hairpinq=2 --hairpin-mode=0x11"
If not set, default value zero will be used and the behavior will
try to get aligned with the previous single port mode. If the ports
belong to different vendors' NICs, it is suggested to use the `self`
hairpin mode only.
Since hairpin configures the hardware resources, the port mask of
packets forwarding engine will not be used here.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch adds shared action support to testpmd CLI.
All shared actions created via testpmd CLI assigned ID for further
reference in other CLI commands. Shared action ID supplied as CLI
argument or assigned by testpmd is similar to flow ID & limited to
scope of testpdm CLI.
Create shared action syntax:
flow shared_action {port_id} create [action_id {shared_action_id}]
[ingress] [egress] action {action} / end
Create shared action examples:
flow shared_action 0 create action_id 100 \
ingress action rss queues 1 2 end / end
This creates shared rss action with id 100 on port 0.
flow shared_action 0 create action_id \
ingress action rss queues 0 1 end / end
This creates shared rss action with id assigned by testpmd
on port 0.
Update shared action syntax:
flow shared_action {port_id} update {shared_action_id}
action {action} / end
Update shared action example:
flow shared_action 0 update 100 \
action rss queues 0 3 end / end
This updates shared rss action having id 100 on port 0
with rss to queues 0 3 (in create example rss queues were
1 & 2).
Destroy shared action syntax:
flow shared_action {port_id} destroy action_id {shared_action_id} [...]
Destroy shared action example:
flow shared_action 0 destroy action_id 100 action_id 101
This destroys shared actions having id 100 & 101
Query shared action syntax:
flow shared_action {port} query {shared_action_id}
Query shared action example:
flow shared_action 0 query 100
This queries shared actions having id 100
Use shared action as flow action syntax:
flow create {port_id} ... / end actions [action / [...]]
shared {action_id} / [action / [...]] end
Use shared action as flow action example:
flow create 0 ingress pattern ... / end \
actions shared 100 / end
This creates flow rule where rss action is shared rss action
having id 100.
All shared action CLIs report status of the command.
Shared action query CLI output depends on action type.
Signed-off-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This is a cleanup commit.
It assembles all tunnel outer updates into one function call to avoid
code duplications.
It defines RTE_VXLAN_GPE_DEFAULT_PORT (4790) in accordance with all
other tunnel protocol definitions.
It replaces all numeric values 4789 in their corresponding definition
RTE_VXLAN_GPE_DEFAULT_PORT.
It updates the 'csum parse-tunnel' documentation.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
IANA has assigned port 6081 as the fixed well-known destination port for
GENEVE. Nevertheless draft-ietf-nvo3-geneve-09 recommends that
implementations make this configurable. This commit enables specifying
any positive UDP destination port number for GENEVE protocol parsing.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
GENEVE is a widely used tunneling protocol in modern Virtualized
Networks. testpmd already supports parsing of several tunneling
protocols including VXLAN, VXLAN-GPE, GRE. This commit adds GENEVE
parsing of inner protocols (IPv4-0x0800, IPv6-0x86dd, Ethernet-0x6558)
based on IETF draft-ietf-nvo3-geneve-09. GENEVE is considered more
flexible than the other protocols. In terms of protocol format GENEVE
header has a variable length options as opposed to other tunneling
protocols which have a fixed header size.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit adds testpmd capability to query and config FEC
function of device. This includes:
- show FEC capabilities, example:
testpmd> show port 0 fec capabilities
- show FEC mode, example:
testpmd> show port 0 fec_mode
- config FEC mode, example:
testpmd> set port <port_id> fec_mode auto|off|rs|baser
where:
auto|off|rs|baser are four kinds of FEC mode which dev
support according to MAC link speed.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Chengchang Tang <tangchengchang@huawei.com>
Add module EEPROM/EEPROM dump command
"show port <port_id> (module_eeprom|eeprom)"
Commands will dump the content of the EEPROM/module
EEPROM for the selected port.
Signed-off-by: David Liu <dliu@iol.unh.edu>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add TM command to enable packet mode for all SP children
in non leaf node. This is a new command as
"add tm nonleaf node pktmode".
Also add support to shaper profile add command to take
packet mode parameter used to setup shaper in packet mode.
This adds an extra argument "packet_mode" to shaper profile add command
"add port tm node shaper profile" as last argument.
This patch also dumps new tm port/level/node capabilities
sched_wfq_packet_mode_supported, sched_wfq_byte_mode_supported,
shaper_private_packet_mode_supported, shaper_private_byte_mode_supported,
shaper_shared_packet_mode_supported, shaper_shared_byte_mode_supported.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
The new 5-tuple swap engine swaps:
source and destination mac address,
source and destination address in ipv4/ipv6,
source and destination port in UDP/TCP.
The forwarding engine will parse each layer
and swap it, and will stop when the next
layer doesn't match.
The mentioned headers of ICMP/ARP/Multicast
packets will be swapped as well according to
matching layers.
usage: --forward-mode=5tswap
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit adds testpmd capability to provide timestamps on the packets
being sent in the txonly mode. This includes:
- SEND_ON_TIMESTAMP support
new device Tx offload capability support added, example:
testpmd> port config 0 tx_offload send_on_timestamp on
- set txtimes, registers field and flag, example:
testpmd> set txtimes 1000000,0
This command enables the packet send scheduling on timestamps if
the first parameter is not zero, generic format:
testpmd> set txtimes (inter),(intra)
where:
inter - is the delay between the bursts in the device clock units.
If "intra" (next parameter) is zero, this is the time between the
beginnings of the first packets in the neighbour bursts, if "intra"
is not zero, "inter" specifies the time between the beginning of
the first packet of the current burst and the beginning of the last
packet of the previous burst. If "inter"parameter is zero the send
scheduling on timestamps is disabled (default).
intra - is the delay between the packets within the burst specified
in the device clock units. The number of packets in the burst is
defined by regular burst setting. If "intra" parameter is zero no
timestamps provided in the packets excepting the first one in the
burst.
As the result the bursts of packet will be transmitted with
specific delay between the packets within the burst and specific
delay between the bursts. The rte_eth_read_clock() is supposed to
be engaged to get the current device clock value and provide the
reference for the timestamps. If there is no supported
rte_eth_read_clock() there will be no provided send scheduling on
the device.
- show txtimes, displays the timing settings
- txonly burst time pattern
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Softnic can be used like other virtual devices without
needing any special mode. Therefore, remove softnic mode
from testpmd app. Documentation is updated as well.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The build should be described only in few places,
in order to maintain up-to-date, accurate and detailed instructions.
This change is removing some of the unneeded repetitions.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jay Zhou <jianjay.zhou@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Update documentation for 'show fwd' testpmd runtime function to show
CPU cycles/packet example.
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
One new cmdline option `--rx-mq-mode` is added in order to have the
possibility to check whether PMD handle the mq mode correctly or not.
The reason is some NICs need to do different settings based on different
RX mq mode, i.e RSS or not.
With this support in testpmd, the above scenario can be tested easily.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
There is no way to report back a link speed of 200Gbps.
Adding 200G link speed.
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, when running start/clear stats&xstats/stop command many times
based on testpmd application, there are incorrect forward Rx/Tx-packets
stats as below:
---------------------- Forward statistics for port 0 --------------
RX-packets: 18446744073709544808 RX-dropped: 0 <snip>
TX-packets: 18446744073709536616 TX-dropped: 0 <snip>
--------------------------------------------------------------------
The root cause as below:
1. The struct rte_port of testpmd.h has a member variable "struct
rte_eth_stats stats" to store the last port statistics.
2. When running start command, it execute cmd_start_parsed ->
start_packet_forwarding -> fwd_stats_reset, which call
rte_eth_stats_get API function to save current port statistics.
3. When running stop command, it execute fwd_stats_display, which call
rte_eth_stats_get to get current port statistics, and then minus last
port statistics.
4. If we run clear stats or xstats after start command, then run stop,
it may display above incorrect stats because the current
Rx/Tx-packets is lower than the last saved RX/TX-packets(uint64_t
overflow).
This patch fixes it by clearing last port statistics when executing
"clear stats/xstats" command.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, there is no way to check the aging event or to get the
current aged flows in testpmd, this patch include those implements, it's
included:
- Add new item "flow_aged" to the current print event command arguments.
- Add new command to list all aged flows, meanwhile, we can set
parameter to destroy it.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add some new types, such as eth/l2-src-only/l2-dst-only/svlan/cvlan/
l2tpv3/esp/ah/pfcp types into RSS hash commands, it could be used
to configure these rss input set by cmdline.
Example flow commands was:
testpmd>flow create 0 ingress pattern eth / ipv4 / l2tpv3oip / end \
actions rss types l2tpv3 end key_len 0 queues end / end
port config commands was:
testpmd>port config all rss l2tpv3
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Introduce new command to dump memory statistics of each socket,
summary, also show changes since last call.
Usage:
dump_socket_mem
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the new flow item RTE_FLOW_ITEM_TYPE_PFCP to flow API to
match a PFCP header.
Add sample PFCP rules for testpmd guide. Since Session Endpoint
Identifier (SEID) only will be present in PFCP Session header and PFCP
Session headers shall be identified when the S field is equal to 1, when
create rules for PFCP Session header with certain SEID the S field need
be set 1.
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Add AH and AH SPI to testpmd rte flow command line.
Add note and sample AH rules in testpmd guide.
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
In current version, we are setting the ports
using portmask. With portmask, we can use only
up to 64 ports. This portlist option enables the user
to use more than 64 ports.
Now we can specify the ports in 2 different ways
- Using portmask (-p [0x]nnn): mask must be in hex format
- Using portlist in the following format
--portlist <p1>[-p2][,p3[-p4],...]
--portmask 0x2 is same as --portlist 1
--portmask 0x3 is same as --portlist 0-1
Signed-off-by: Hariprasad Govindharajan <hariprasad.govindharajan@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
DPDK now supports registration of dynamic flags (dynf) to the mbuf.
dynf can be given any name, and can be used with a supporting PMD or
supporting application.
Due to the generic concept of the dynf, it is impossible and
meaningless, to define register set/get function for each flag.
This commit introduce a generic way to register and set/clear such
flags.
The basic syntax:
port config <port id> dynf <name> <set|clear>
The first step the new flag is registered. Regardless if the action is
set or clear.
There is no way to unregister the flag, after registering it.
The second step, if the action is set then we set the requested flag.
If this is the first flag that is enabled we also register a call back
for the Tx. In this call back we set the flag.
If the action is clear the requested flag is cleared, and if there
are no more flags that are set, the call back is removed.
The reason that the set is only applied in Tx is that in case of Rx
it is assumed that the value comes from the PMD.
If log is enabled the name of the flag, and value will be printed
in the packet info.
In order for the log to work correctly the registration of the flag
must be done before setting verbose.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
add ITEM_ESP
add ITEM_ESP_SPI
update release notes for testpmd changes
add sample ESP rules in testpmd guide
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
This patch adds the new flow item RTE_FLOW_ITEM_TYPE_L2TPV3OIP to
flow API to match a L2TPv3 over IP header. This patch supports only
L2TPv3 over IP header format which is different to L2TPv2/L2TPv3
over UDP. The difference in header formats between L2TPv3 over IP
and L2TP over UDP require a separate implementation for each.
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: Dariusz Jagus <dariuszx.jagus@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
For some overlay network, such as VXLAN, the DSCP field in the new outer
IP header after VXLAN decapsulation may need to be updated accordingly.
This commit introduce the DSCP modify action for IPv4 and IPv6.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ori Kam <orika@mellanox.com>
Patch adds a runtime function to display the unicast and
multicast MAC addresses added to a port.
Syntax:
show port (port_id) macs|mcast_macs
Usage:
testpmd> show port 0 macs
Number of MAC address added: 1
B0:26:28:7F:F5:C1
testpmd>
testpmd> show port 0 mcast_macs
Number of Multicast MAC address added: 0
testpmd>
testpmd> mac_addr add 0 B0:26:28:7F:22:33
testpmd> mac_addr add 0 B0:26:28:7F:22:34
testpmd> show port 0 macs
Number of MAC address added: 3
B0:26:28:7F:F5:C1
B0:26:28:7F:22:33
B0:26:28:7F:22:34
testpmd>
testpmd> mac_addr remove 0 B0:26:28:7F:22:33
testpmd> show port 0 macs
Number of MAC address added: 2
B0:26:28:7F:F5:C1
B0:26:28:7F:22:34
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Commit in fixes tag removed the match_metadata Tx offload.
This patch removes the option to select this offload from testpmd
menu, help text and documentation.
It also modifies the cmd_show_tx_metadata_parsed() function, to
display the value correctly, and the dump_pkt_burst() function to
display the relevant (Tx/Rx) metadata only.
Fixes: 9bf26e1318e3 ("ethdev: move egress metadata to dynamic field")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Shoot repeated words in all our guides.
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
This patch implements use of the API for LRO aggregated packet
max size.
It adds command-line and runtime commands to configure this value,
and adds option to show the supported value.
Documentation is updated accordingly.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new Rx offload flag `DEV_RX_OFFLOAD_RSS_HASH` which can be used to
enable/disable PMDs write to `rte_mbuf:#️⃣:rss`.
PMDs notify the validity of `rte_mbuf:#️⃣rss` to the application
by enabling `PKT_RX_RSS_HASH ` flag in `rte_mbuf::ol_flags`.
Also update testpmd rx_offload command to include RSS_HASH
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit introduce the hairpin queues to the testpmd.
the hairpin queue is configured using --hairpinq=<n>
the hairpin queue adds n queue objects for both the total number
of TX queues and RX queues.
The connection between the queues are 1 to 1, first Rx hairpin queue
will be connected to the first Tx hairpin queue
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Adding support to check TX and RX descriptor status.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The original patch used incorrect subnet range for testing.
Fixes: 37afe381bde4 ("examples/l3fwd: use reserved IP addresses")
Cc: stable@dpdk.org
Reported-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Documentation includes separate pages of EAL command-line options for
Linux and for FreeBSD.
Links to these pages use the same text 'EAL parameters', so it is not
clear which link to use for which environment.
This patch adds the text '(Linux)' and '(FreeBSD)' where relevant, to
clearly identify the links.
Fixes: 3ee567cfec37 ("doc: document all EAL parameters in one place")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
In some scenarios, the raw_encap/raw_decap actions could be multiple in
one single flow (e,g. hirepin flow):
... actions raw_decap / raw_encap / raw_decap / raw_encap / ...
This requires the testpmd supports multiple raw_encap/raw_decap data
settings as well.
With the multiple raw_encap/raw_decap settings, the testpmd commands –
set raw_encap / set raw_decap will become:
set raw_encap <index> <item pattern>
set raw_decap <index> <item pattern>
And the actions – raw_encap/raw_decap also could optionally choose which
global raw_encap/raw_decap confs to be used by index:
... actions raw_decap index 1 / raw_encap index 2 / ...
If there is no `index` specified, the default index is 0:
set raw_encap <item pattern>
... actions raw_decap / raw_encap / ...
which will use raw_encap index 0.
In addition to the set raw_encap/raw_decap commands,
show <raw_encap/raw_decap> <index>
show <raw_encap/raw_decap> all
are also introduced into in order to check which index is set and to
what.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
This patch fixed the bug that a failure appeared when config
rx_offload crc_strip using command "port config all crc-strip
on|off". The reason is that this command was removed in Commit
e5db17a1e54e. The current command is "port config <port_id>
rx_offload keep_crc on|off" instead.
In this patch, some codes left over about 'crc_strip' are
removed to make the current command clearer.
Fixes: e5db17a1e54e ("app/testpmd: remove duplicated Rx offload commands")
Cc: stable@dpdk.org
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Segregate QinQ from Extend Offload and support QinQ offload
in vlan set command. Merge all port wise rx vlan offloads in
command line help and documentation for a cleaner structure.
Fix port info display to distinguish between qinq strip and
extend offloads. Flatten all VLAN offload info into a single
line to reduce info length.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
