Add MAC addresses to filter incoming packets, support to set
multicast addresses to filter. And support to set unicast table array.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
According to current semantics of power monitor, this commit adds a
callback function to decide whether aborts the sleep by checking
current value against the expected value and vhost_get_monitor_addr
to provide address to monitor. When no packet come in, the value of
address will not be changed and the running core will sleep. Once
packets arrive, the value of address will be changed and the running
core will wakeup.
Signed-off-by: Miao Li <miao.li@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
This commit defines rte_vhost_power_monitor_cond which is used to pass
some information to vhost driver. The information is including the
address to monitor, the expected value, the mask to extract value read
from 'addr', the value size of monitor address, the match flag used to
distinguish the value used to match something or not match something.
Vhost driver can use these information to fill rte_power_monitor_cond.
Signed-off-by: Miao Li <miao.li@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
According to current semantics of power monitor, this commit adds a
callback function to decide whether aborts the sleep by checking
current value against the expected value and virtio_get_monitor_addr
to provide address to monitor. When no packet come in, the value of
address will not be changed and the running core will sleep. Once
packets arrive, the value of address will be changed and the running
core will wakeup.
Signed-off-by: Miao Li <miao.li@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Provide the capability to update the hash key, hash types
and RETA table on the fly (without needing to stop/start
the device). However, the key length and the number of RETA
entries are fixed to 40B and 128 entries respectively. This
is done in order to simplify the design, but may be
revisited later as the Virtio spec provides this
flexibility.
Note that only VIRTIO_NET_F_RSS support is implemented,
VIRTIO_NET_F_HASH_REPORT, which would enable reporting the
packet RSS hash calculated by the device into mbuf.rss, is
not yet supported.
Regarding the default RSS configuration, it has been
chosen to use the default Intel ixgbe key as default key,
and default RETA is a simple modulo between the hash and
the number of Rx queues.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for inline crypto for IPsec, for ESP transport and
tunnel over IPv4 and IPv6, as well as supporting the offload for
ESP over UDP, and in conjunction with TSO for UDP and TCP flows.
Implement support for rte_security packet metadata
Add definition for IPsec descriptors, extend support for offload
in data and context descriptor to support
Add support to virtual channel mailbox for IPsec Crypto request
operations. IPsec Crypto requests receive an initial acknowledgment
from physical function driver of receipt of request and then an
asynchronous response with success/failure of request including any
response data.
Add enhanced descriptor debugging
Refactor of scalar tx burst function to support integration of offload
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
In socket direct mode, it's possible to bind any two (maybe four
in future) PCIe devices with IDs like xxxx:xx:xx.x and
yyyy:yy:yy.y. Bonding member interfaces are unnecessary to have
the same PCIe domain/bus/device ID anymore,
Kernel driver uses "system_image_guid" to identify if devices can
be bound together or not. Sysfs "phys_switch_id" is used to get
"system_image_guid" of each network interface.
OFED 5.4+ is required to support "phys_switch_id".
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This patch adds a new parameter to the FIB configuration to specify
the size of the extension for internal RIB structure.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Tested-by: Conor Walsh <conor.walsh@intel.com>
This patch add a new Toeplitz hash implementation using
Galios Fields New Instructions (GFNI).
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add patch for programming the regex database through ROF file,
using the firmware instead of manually through the software.
No need to setup the DB anymore, the regex-daemon is responsible
for that always.
In the new flow the regex driver only has to program ROF rules
by using set params DevX cmd, requires ROF mkey creation.
The rules file has to be read into 4KB aligned memory.
Signed-off-by: Ady Agbarih <adypodoman@gmail.com>
Acked-by: Ori Kam <orika@nvidia.com>
AddressSanitizer [1] a.k.a. ASan is a widely-used debugging tool to
detect memory access errors.
It helps to detect issues like use-after-free, various kinds of buffer
overruns in C/C++ programs, and other similar errors, as well as
printing out detailed debug information whenever an error is detected.
ASan is integrated with gcc and clang and can be enabled via a meson
option: -Db_sanitize=address
See the documentation for details (especially regarding clang).
Enabling ASan has an impact on performance since additional checks are
added to generated binaries.
Enabling ASan with Windows is currently not supported in DPDK.
1: https://github.com/google/sanitizers/wiki/AddressSanitizer
Signed-off-by: Xueqin Lin <xueqin.lin@intel.com>
Signed-off-by: Zhihong Peng <zhihongx.peng@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
FINISHED state seems to be used to indicate that the worker's update
of the 'state' is not visible to other threads. There seems to be no
requirement to have such a state.
Since the FINISHED state is removed, the API rte_eal_wait_lcore
is updated to always return the status of the last function that
ran in the worker core.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Feifei Wang <feifei.wang2@arm.com>
Fix the mbuf offload flags namespace by adding an RTE_ prefix to the
name. The old flags remain usable, but a deprecation warning is issued
at compilation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
The device specific structures - rte_cryptodev
and rte_cryptodev_data are moved to cryptodev_pmd.h
to hide it from the applications.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Tested-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
An autotest is added for the new chacha20_poly1305 PMD.
A new test case is also added for SGL test.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add in new chacha20_poly1305 PMD to the ipsec_mb framework.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch removes the crypto/zuc folder and gathers all zuc PMD
implementation specific details into two files,
pmd_zuc.c and pmd_zuc_priv.h in the crypto/ipsec_mb folder.
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch enables out-of-place auth-cipher operations where
digest should be encrypted along with the rest of raw data.
It also adds support for partially encrypted digest when using
auth-cipher operations.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Signed-off-by: Kai Ji <kai.ji@intel.com>
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch removes the crypto/snow3g folder and gathers all snow3g PMD
implementation specific details into a single file,
pmd_snow3g.c in the crypto/ipsec_mb folder.
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch removes the crypto/kasumi folder and gathers all kasumi PMD
implementation specific details into a single file,
pmd_kasumi.c in the crypto/ipsec_mb folder.
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch removes the crypto/aesni_gcm folder and gathers all
aesni-gcm PMD implementation specific details into a single file,
pmd_aesni_gcm.c in the crypto/ipsec_mb folder.
A redundant check for iv length is removed.
GCM ops are stored in the queue pair for multi process support, they
are updated during queue pair setup for both primary and secondary
processes.
GCM ops are also set per lcore for the CPU crypto mode.
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add support for ZUC-EEA3-256 and ZUC-EIA3-256.
Only 4-byte tags supported for now.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch removes the crypto/aesni_mb folder and gathers all
aesni-mb PMD implementation specific details into a single file,
pmd_aesni_mb.c in crypto/ipsec_mb.
Now that intel-ipsec-mb v1.0 is the minimum supported version, old
macros can be replaced with the newer macros supported by this version.
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The ipsec_mb SW PMD now has multiprocess support.
The queue-pair IMB_MGR is stored in a memzone instead of being allocated
externally by the Intel IPSec MB library, when v1.1 is used.
If v1.0 is used, multi process is not supported, and allocation is
done as before.
The secondary process needs to reconfigure the queue-pair to allow for
IMB_MGR function pointers be updated.
Intel IPsec MB library version 1.1 is required for this support.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch introduces the new framework to share common code between
the SW crypto PMDs that depend on the intel-ipsec-mb library.
This change helps to reduce future effort on the code maintenance and
feature updates.
The PMDs that will be added to this framework in subsequent patches are:
- AESNI MB
- AESNI GCM
- CHACHA20_POLY1305
- KASUMI
- SNOW3G
- ZUC
The use of these PMDs will not change, they will still be supported for
x86, and will use the same EAL args as before.
The minimum required version for the intel-ipsec-mb library is now v1.0.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
In current DPDK framework, each Rx queue is pre-loaded with mbufs to
save incoming packets. For some PMDs, when number of representors scale
out in a switch domain, the memory consumption became significant.
Polling all ports also leads to high cache miss, high latency and low
throughput.
This patch introduces shared Rx queue. Ports in same Rx domain and
switch domain could share Rx queue set by specifying non-zero sharing
group in Rx queue configuration.
Shared Rx queue is identified by share_rxq field of Rx queue
configuration. Port A RxQ X can share RxQ with Port B RxQ Y by using
same shared Rx queue ID.
No special API is defined to receive packets from shared Rx queue.
Polling any member port of a shared Rx queue receives packets of that
queue for all member ports, port_id is identified by mbuf->port. PMD is
responsible to resolve shared Rx queue from device and queue data.
Shared Rx queue must be polled in same thread or core, polling a queue
ID of any member port is essentially same.
Multiple share groups are supported. PMD should support mixed
configuration by allowing multiple share groups and non-shared Rx queue
on one port.
Example grouping and polling model to reflect service priority:
Group1, 2 shared Rx queues per port: PF, rep0, rep1
Group2, 1 shared Rx queue per port: rep2, rep3, ... rep127
Core0: poll PF queue0
Core1: poll PF queue1
Core2: poll rep2 queue0
PMD advertise shared Rx queue capability via RTE_ETH_DEV_CAPA_RXQ_SHARE.
PMD is responsible for shared Rx queue consistency checks to avoid
member port's configuration contradict each other.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch enables building the e1000 driver for Windows.
I tested using two Windows VM on top of VMware Fusion,
creating two e1000 devices with device ID 0x10D3 (8274L),
verifying rx/tx works correctly using dpdk-testpmd.exe
rxonly and txonly mode.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
Tested-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Add support for PPP over L2TPv2 over UDP protocol RSS Hash based
on inner IP src/dst address and TCP/UDP src/dst port.
Patterns are listed below:
eth/ipv4(6)/udp/l2tpv2/ppp/ipv4(6)
eth/ipv4(6)/udp/l2tpv2/ppp/ipv4(6)/udp
eth/ipv4(6)/udp/l2tpv2/ppp/ipv4(6)/tcp
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added flow pattern items and header formats of L2TPv2 and PPP.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Malloc cl in the cmdline_stdin_new function, so release in the
cmdline_stdin_exit function is logical, so that cl will not be
released alone.
Fixes: af75078fece3 ("first public release")
Signed-off-by: Zhihong Peng <zhihongx.peng@intel.com>
Reviewed-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Zhihong Peng <zhihongx.peng@intel.com>
Hide struct rdline definition and some RDLINE_* constants in order
to be able to change internal buffer sizes transparently to the user.
Add new functions:
* rdline_new(): allocate and initialize struct rdline.
This function replaces rdline_init() and takes an extra parameter:
opaque user data for the callbacks.
* rdline_free(): deallocate struct rdline.
* rdline_get_history_buffer_size(): for use in tests.
* rdline_get_opaque(): to obtain user data in callback functions.
Remove rdline_init() function from library headers and export list,
because using it requires the knowledge of sizeof(struct rdline).
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
Remove the definition of `struct cmdline` from public header.
Deprecation notice:
https://mails.dpdk.org/archives/dev/2020-September/183310.html
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
Deprecate the rawdev IOAT driver as both IOAT and IDXD drivers have
moved to dmadev.
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add the basic device probe/remove skeleton code and initial documentation
for new IOAT DMA driver. Maintainers update is also included in this
patch.
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
Add the basic device probe/remove skeleton code for DSA device bound to
the vfio pci driver. Relevant documentation and MAINTAINERS update also
included.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
This is a new packet capture application to replace existing pdump.
The new application works like Wireshark dumpcap program and supports
the pdump API features.
It is not complete yet some features such as filtering are not implemented.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This enhances the DPDK pdump library to support new
pcapng format and filtering via BPF.
The internal client/server protocol is changed to support
two versions: the original pdump basic version and a
new pcapng version.
The internal version number (not part of exposed API or ABI)
is intentionally increased to cause any attempt to try
mismatched primary/secondary process to fail.
Add new API to do allow filtering of captured packets with
DPDK BPF (eBPF) filter program. It keeps statistics
on packets captured, filtered, and missed (because ring was full).
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This is utility library for writing pcapng format files
used by Wireshark family of utilities. Older tcpdump
also knows how to read (but not write) this format.
See
https://github.com/pcapng/pcapng/
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Move memory used by timer adapters to hugepage.
Allocate memory on the first adapter create or lookup to address
both primary and secondary process usecases.
This will prevent TLB misses if any and aligns to memory structure
of other subsystems.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
