Some files were left with full license and wrong copyright format.
They are switched to this format:
SPDX-License-Identifier: BSD-3-Clause
Copyright 2017 Mellanox Technologies, Ltd
Fixes: 5feecc57d90b ("align SPDX Mellanox copyrights")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Update information for blacklist and whitelist options for secondary
process to share same from primary process.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
rte_cryptodev_get_header_session_size() and
rte_cryptodev_get_private_session_size() functions are
targeting symmetric sessions.
With the future addition of asymmetric operations,
these functions need to be renamed from *cryptodev_*_session_*
to *cryptodev_sym_*_session_* to be symmetric specific.
The two original functions are marked as deprecated
and will be removed in 18.08, so applications can still
use the functions in 18.05.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch check if a input requested offloading is valid or not.
Any reuqested offloading must be supported in the device capabilities.
Any offloading is disabled by default if it is not set in the parameter
dev_conf->[rt]xmode.offloads to rte_eth_dev_configure() and
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If any offloading is enabled in rte_eth_dev_configure() by application,
it is enabled on all queues no matter whether it is per-queue or
per-port type and no matter whether it is set or cleared in
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If a per-queue offloading hasn't be enabled in rte_eth_dev_configure(),
it can be enabled or disabled for individual queue in
ret_eth_[rt]x_queue_setup().
A new added offloading is the one which hasn't been enabled in
rte_eth_dev_configure() and is reuqested to be enabled in
rte_eth_[rt]x_queue_setup(), it must be per-queue type,
otherwise trigger an error log.
The underlying PMD must be aware that the requested offloadings
to PMD specific queue_setup() function only carries those
new added offloadings of per-queue type.
This patch can make above such checking in a common way in rte_ethdev
layer to avoid same checking in underlying PMD.
This patch assumes that all PMDs in 18.05-rc2 have already
converted to offload API defined in 17.11 . It also assumes
that all PMDs can return correct offloading capabilities
in rte_eth_dev_infos_get().
In the beginning of [rt]x_queue_setup() of underlying PMD,
add offloads = [rt]xconf->offloads |
dev->data->dev_conf.[rt]xmode.offloads; to keep same as offload API
defined in 17.11 to avoid upper application broken due to offload
API change.
PMD can use the info that input [rt]xconf->offloads only carry
the new added per-queue offloads to do some optimization or some
code change on base of this patch.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
In VM2NIC case zero copy may need some tuning to get best performance.
This patch describes the zero copy starved case and provides a tuning
tip.
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Change baseband device name:
- from turbo_sw to baseband_turbo_sw
- from bbdev_null to baseband_null
To keep backwards compatibility the old names are still valid
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Add entries in the programmer's guide, API index, maintainer's file
and release notes for the event crypto adapter.
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Library folder name and output library name are same except a few flaws
including librte_ether.
This library is network device abstraction layer, the name "ethdev" fits
better than "ether", and library & header files already named as ethdev.
Also there is a rte_ether.h in the net library which can cause confusion.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add rte_flow_action_count action data structure to enable shared
counters across multiple flows on a single port or across multiple
flows on multiple ports within the same switch domain. Also this enables
multiple count actions to be specified in a single flow action.
This patch also modifies the existing rte_flow_query API to take the
rte_flow_action structure as an input parameter instead of the
rte_flow_action_type enumeration to allow querying a specific action
from a flow rule when multiple actions of the same type are specified.
This patch also contains updates for the bonding, failsafe and mlx5 PMDs
and testpmd application which are affected by this API change.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Introduces a new action type RTE_FLOW_ITEM_TYPE_MARK which enables
flow patterns to specify arbitrary integer values to match aginst
set by the RTE_FLOW_ACTION_TYPE_MARK action in previously matched
flows.
Add support for specification of new MARK flow item in testpmd's cli.
Update testpmd documentation to describe new MARK flow item support.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Add jump action type which defines an action which allows a matched
flow to be redirect to the specified group. This allows physical and
logical flow table/group hierarchies to be defined through rte_flow.
This breaks ABI compatibility for the following public functions (as it
modifes the ordering of the rte_flow_action_type enumeration):
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Add support for specification of new JUMP action to testpmd's flow
cli, and update the testpmd documentation to describe this new
action.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Add new flow action types and associated action data structures to
support the encapsulation and decapsulation of VXLAN and NVGRE tunnel
endpoints.
The RTE_FLOW_ACTION_TYPE_[VXLAN/NVGRE]_ENCAP action will cause the
matching flow to be encapsulated in the tunnel endpoint overlay
defined in the [vxlan/nvgre]_encap action data.
The RTE_FLOW_ACTION_TYPE_[VXLAN/NVGRE]_DECAP action will cause all
headers associated with the outer most tunnel endpoint of the specified
type for the matching flows.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Introduces a new structure, rte_eth_devargs, to support generic
ethdev arguments common across NET PMDs, with a new API
rte_eth_devargs_parse API to support PMD parsing these arguments. The
patch add support for a representor argument passed with passed with
the EAL -w option. The representor parameter allows the user to specify
which representor ports to initialise on a device.
The argument supports passing a single representor port, a list of
port values or a range of port values.
-w BDF,representor=1 # create representor port 1 on pci device BDF
-w BDF,representor=[1,2,5,6,10] # create representor ports in list
-w BDF,representor=[0-31] # create representor ports in range
Signed-off-by: Remy Horton <remy.horton@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add document to describe the model for representing switching capable
devices in DPDK, using a general ethdev port model and through port
representors. This document also details the port model and the
rte_flow semantics required for flow programming, as well as listing
some example use cases.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Reviewed-by: Marko Kovacevic <marko.kovacevic@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for the following OpenFlow-defined actions:
- RTE_FLOW_ACTION_OF_POP_VLAN: pop the outer VLAN tag.
- RTE_FLOW_ACTION_OF_PUSH_VLAN: push a new VLAN tag.
- RTE_FLOW_ACTION_OF_SET_VLAN_VID: set the 802.1q VLAN id.
- RTE_FLOW_ACTION_OF_SET_VLAN_PCP: set the 802.1q priority.
- RTE_FLOW_ACTION_OF_POP_MPLS: pop the outer MPLS tag.
- RTE_FLOW_ACTION_OF_PUSH_MPLS: push a new MPLS tag.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
VXLAN-GPE enables VXLAN for all protocols. Protocol link:
https://www.ietf.org/id/draft-ietf-nvo3-vxlan-gpe-05.txt
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
RTE_FLOW_ACTION_TYPE_PORT_ID brings the ability to inject matching traffic
into a different device, as identified by its DPDK port ID.
This is normally only supported when the target port ID has some kind of
relationship with the port ID the flow rule is created against, such as
being exposed by a common physical device (e.g. a different port of an
Ethernet switch).
The converse pattern item, RTE_FLOW_ITEM_TYPE_PORT_ID, makes the resulting
flow rule match traffic whose origin is the specified port ID. Note that
specifying a port ID that differs from the one the flow rule is created
against is normally meaningless (if even accepted), but can make sense if
combined with the transfer attribute.
These must not be confused with their PHY_PORT counterparts, which refer to
physical ports using device-specific indices, but unlike PORT_ID are not
necessarily tied to DPDK port IDs.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch adds the missing action counterpart to the PHY_PORT pattern
item, that is, the ability to directly inject matching traffic into a
physical port of the underlying device.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
While RTE_FLOW_ITEM_TYPE_PORT refers to physical ports of the underlying
device using specific identifiers, these are often confused with DPDK port
IDs exposed to applications in the global name space.
Since this pattern item is seldom used, rename it RTE_FLOW_ITEM_PHY_PORT
for better clarity.
No ABI impact.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Contrary to all other pattern items, these are inconsistently documented as
affecting traffic instead of simply matching its origin, without provision
for the latter.
This commit clarifies documentation and updates PMDs since the original
behavior now has to be explicitly requested using the new transfer
attribute.
It breaks ABI compatibility for the following public functions:
- rte_flow_create()
- rte_flow_validate()
Impacted PMDs are bnxt and i40e, for which the VF pattern item is now only
supported when a transfer attribute is also present.
Fixes: b1a4b4cbc0a8 ("ethdev: introduce generic flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This new attribute enables applications to create flow rules that do not
simply match traffic whose origin is specified in the pattern (e.g. some
non-default physical port or VF), but actively affect it by applying the
flow rule at the lowest possible level in the underlying device.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
VLAN TCI is a 16-bit field broken down as PCP (3b), DEI (1b) and VID (12b).
The default mask used by PMDs for the VLAN pattern when one isn't provided
by the application comprises the entire TCI, which is problematic because
most devices only support VID matching.
This forces applications to always provide a mask limited to the VID part
in order to successfully apply a flow rule with a VLAN pattern item.
Moreover, applications rarely want to match PCP and DEI intentionally.
Given the above and since VID is what is commonly referred to when talking
about VLAN, this commit excludes PCP and DEI from the default mask.
Fixes: 6de5c0f1302c ("ethdev: define default item masks in flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
TPID handling in rte_flow VLAN and E_TAG pattern item definitions is not
consistent with the normal stacking order of pattern items, which is
confusing to applications.
Problem is that when followed by one of these layers, the EtherType field
of the preceding layer keeps its "inner" definition, and the "outer" TPID
is provided by the subsequent layer, the reverse of how a packet looks like
on the wire:
Wire: [ ETH TPID = A | VLAN EtherType = B | B DATA ]
rte_flow: [ ETH EtherType = B | VLAN TPID = A | B DATA ]
Worse, when QinQ is involved, the stacking order of VLAN layers is
unspecified. It is unclear whether it should be reversed (innermost to
outermost) as well given TPID applies to the previous layer:
Wire: [ ETH TPID = A | VLAN TPID = B | VLAN EtherType = C | C DATA ]
rte_flow 1: [ ETH EtherType = C | VLAN TPID = B | VLAN TPID = A | C DATA ]
rte_flow 2: [ ETH EtherType = C | VLAN TPID = A | VLAN TPID = B | C DATA ]
While specifying EtherType/TPID is hopefully rarely necessary, the stacking
order in case of QinQ and the lack of documentation remain an issue.
This patch replaces TPID in the VLAN pattern item with an inner
EtherType/TPID as is usually done everywhere else (e.g. struct vlan_hdr),
clarifies documentation and updates all relevant code.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Summary of changes for PMDs that implement ETH, VLAN or E_TAG pattern
items:
- bnxt: EtherType matching is supported with and without VLAN, but TPID
matching is not and triggers an error.
- e1000: EtherType matching is only supported with the ETHERTYPE filter,
which does not support VLAN matching, therefore no impact.
- enic: same as bnxt.
- i40e: same as bnxt with existing FDIR limitations on allowed EtherType
values. The remaining filter types (VXLAN, NVGRE, QINQ) do not support
EtherType matching.
- ixgbe: same as e1000, with additional minor change to rely on the new
E-Tag macro definition.
- mlx4: EtherType/TPID matching is not supported, no impact.
- mlx5: same as bnxt.
- mvpp2: same as bnxt.
- sfc: same as bnxt.
- tap: same as bnxt.
Fixes: b1a4b4cbc0a8 ("ethdev: introduce generic flow API")
Fixes: 99e7003831c3 ("net/ixgbe: parse L2 tunnel filter")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
RSS hash types (ETH_RSS_* macros defined in rte_ethdev.h) describe the
protocol header fields of a packet that must be taken into account while
computing RSS.
When facing encapsulated (e.g. tunneled) packets, there is an ambiguity as
to whether these should apply to inner or outer packets. Applications need
the ability to tell exactly "where" RSS must be performed.
This is addressed by adding encapsulation level information to the RSS flow
action. Its default value is 0 and stands for the usual unspecified
behavior. Other values provide a specific encapsulation level.
Contrary to the change announced by commit 676b605182a5 ("doc: announce
ethdev API change for RSS configuration"), this patch does not affect
struct rte_eth_rss_conf but struct rte_flow_action_rss as the former is not
used anymore by the RSS flow action. ABI impact is therefore limited to
rte_flow.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
By definition, RSS involves some kind of hash algorithm, usually Toeplitz.
Until now it could not be modified on a flow rule basis and PMDs had to
always assume RTE_ETH_HASH_FUNCTION_DEFAULT, which remains the default
behavior when unspecified (0).
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Since its inception, the rte_flow RSS action has been relying in part on
external struct rte_eth_rss_conf for compatibility with the legacy RSS API.
This structure lacks parameters such as the hash algorithm to use, and more
recently, a method to tell which layer RSS should be performed on [1].
Given struct rte_eth_rss_conf will never be flexible enough to represent a
complete RSS configuration (e.g. RETA table), this patch supersedes it by
extending the rte_flow RSS action directly.
A subsequent patch will add a field to use a non-default RSS hash
algorithm. To that end, a field named "types" replaces the field formerly
known as "rss_hf" and standing for "RSS hash functions" as it was
confusing. Actual RSS hash function types are defined by enum
rte_eth_hash_function.
This patch updates all PMDs and example applications accordingly.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
[1] commit 676b605182a5 ("doc: announce ethdev API change for RSS
configuration")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch replaces C99-style flexible arrays in struct rte_flow_action_rss
and struct rte_flow_item_raw with standard pointers to the same data.
They proved difficult to use in the field (e.g. no possibility of static
initialization) and unsuitable for C++ applications.
Affected PMDs and examples are updated accordingly.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Fixes: b1a4b4cbc0a8 ("ethdev: introduce generic flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch makes the following changes to flow rule actions:
- List order now matters, they are redefined as performed first to last
instead of "all simultaneously".
- Repeated actions are now supported (e.g. specifying QUEUE multiple times
now duplicates traffic among them). Previously only the last action of
any given kind was taken into account.
- No more distinction between terminating/non-terminating/meta actions.
Flow rules themselves are now defined as always terminating unless a
PASSTHRU action is specified.
These changes alter the behavior of flow rules in corner cases in order to
prepare the flow API for actions that modify traffic contents or properties
(e.g. encapsulation, compression) and for which order matter when combined.
Previously one would have to do so through multiple flow rules by combining
PASSTRHU with priority levels, however this proved overly complex to
implement at the PMD level, hence this simpler approach.
This breaks ABI compatibility for the following public functions:
- rte_flow_create()
- rte_flow_validate()
PMDs with rte_flow support are modified accordingly:
- bnxt: no change, implementation already forbids multiple actions and does
not support PASSTHRU.
- e1000: no change, same as bnxt.
- enic: modified to forbid redundant actions, no support for default drop.
- failsafe: no change needed.
- i40e: no change, implementation already forbids multiple actions.
- ixgbe: same as i40e.
- mlx4: modified to forbid multiple fate-deciding actions and drop when
unspecified.
- mlx5: same as mlx4, with other redundant actions also forbidden.
- sfc: same as mlx4.
- tap: implementation already complies with the new behavior except for
the default pass-through modified as a default drop.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Upcoming changes in relation to the handling of actions list will make the
DUP action redundant as specifying several QUEUE actions will achieve the
same behavior. Besides, no PMD implements this action.
By removing an entry from enum rte_flow_action_type, this patch breaks ABI
compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This section has become less relevant since the flow API (rte_flow) is now
a mature DPDK API with applications developed directly on top of it instead
of an afterthought.
This patch removes it for the following reasons:
- It has never been updated to track the latest changes in the legacy
filter types and never will.
- Many provided examples are theoretical and misleading since PMDs do not
implement them. Others are obvious.
- Upcoming work on the flow API will alter the behavior of several pattern
items, actions and in some cases, flow rules, which will in turn cause
existing examples to be wrong.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Although pattern items and actions examples end with "and so on", these
lists include all existing definitions and as a result are updated almost
every time new types are added. This is cumbersome and pointless.
This patch also synchronizes Doxygen and external API documentation wording
with a slight clarification regarding meta pattern items.
No fundamental API change.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Ethernet devices which are grouped by bonding PMD, aka slaves, are
sharing the same queues and RSS configurations and their Rx burst
functions must be managed by the bonding PMD according to the bonding
architecture.
So, it makes sense to configure the same flow rules for all the bond
slaves to allow consistency in packet flow management.
Add rte flow support to the bonding PMD to manage all flow
configuration to the bonded slaves.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch fixes a trivial typo in the programmer's guide.
Fixes: 1733be6d3147 ("doc: new eal multi-pthread feature")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add timestamp to received packets before enqueuing to
event device if the timestamp is not already set. Adding
timestamp in the Rx adapter avoids additional latency due
to the event device.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
In vhost-switch example, when binding nic to vfio-pci with iommu enabled,
dequeue zero copy cannot work in VM2NIC mode due to no iommu dma mapping
is setup for guest memory currently.
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch adds public API implementation to vhost crypto.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The rte_ctrlmbuf structure is not used by any example application
in dpdk. Remove it, as announced on the mailing list.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
It's not necessary to populate guest memory from vhost side unless
zerocopy is enabled or users want better performance.
Update the doc for guest memory requirement clarification.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add information to explain applications using multiple instances of sw
crypto with example.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
