Add more descriptions regarding SR-IOV and RSS settings.
Remove 'Multicast MAC filter' and add 'Allmulticast mode' to the
features.
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Add new callbacks for eth_dev_ops of i40e to get the information
and data of plugin module eeprom.
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Add new callbacks for eth_dev_ops of e1000 to get the information and
data of plugin module EEPROM.
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Add new callbacks for eth_dev_ops of ixgbe to get the information
and data of plugin module eeprom.
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Expose the runtime queue configuration capability and enhance
i40e_dev_[rx|tx]_queue_setup to handle the situation when
device already started.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
It's not possible to setup a queue when the port is started
because of a check in ethdev layer. New capability flags are
added in order to relax this check for devices which support
queue setup in runtime. The functions rte_eth_[rx|tx]_queue_setup
will raise an error only if the port is started and runtime setup
of queue is not supported.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Update link status related feature document items and minor updates in
some link status related functions.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Documentation updates including for 1400 series VIC adapters.
Remove VLAN filter from the features file as the driver does not
support that API. Hardware does support VLAN filtering, but it is not
controlled through the driver.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The name "mrvl" for Marvell PMD driver for PPv2 Marvell PPv2
(Packet Processor v2) 1/10 Gbps adapter is too generic and causes
problem for adding new PMD drivers for other Marvell devices.
Changed to "mvpp2" for specific Marvell PPv2 PMD.
This patch doesn't introduce any change except renaming.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add minimal VF driver. Declare functions common to both PF and VF
functionality in separate header file and import the header file.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Enable rx queue interrupts if the app requests them, and vNIC has
enough interrupt resources. Use interrupt vector 0 for link status and
errors. Use vector 1 for rx queue 0, vector 2 for rx queue 1, and so
on. So, with n rx queues, vNIC needs to have at n + 1 interrupts.
For VIC, enabling and disabling rx queue interrupts are simply
mask/unmask operations. VIC's credit based interrupt moderation is not
used, as the app wants to explicitly control when to enable/disable
interrupts.
This version requires MSI-X (vfio-pci). Sharing one interrupt for link
status and rx queues is possible, but is rather complex and has no
user demands.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Currently, when more than 1 receive queues are configured, the driver
always enables RSS with the driver's own default hash type, key, and
RETA. The user is unable to change any of the RSS settings. Address
this by implementing the ethdev RSS API as follows.
Correctly report the RETA size, key size, and supported hash types
through rte_eth_dev_info.
During dev_configure(), initialize RSS according to the device's
mq_mode and rss_conf. Start with the default RETA, and use the default
key unless a custom key is provided.
Add the RETA and rss_conf query/set handlers to let the user change
RSS settings after the initial configuration. The hardware is able to
change hash type, key, and RETA individually. So, the handlers change
only the affected settings.
Refactor/rename several functions in order to make their intentions
clear. For example, remove all traces of RSS from
enicpmd_vlan_offload_set() as it is confusing.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Add firmware API for updating RSS hash configuration and key. Move
RSS hash configuration from cxgb4_write_rss() to a separate function
cxgbe_write_rss_conf().
Also, rename cxgb4_write_rss() to cxgbe_write_rss() for consistency.
Original work by Surendra Mobiya <surendra@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Attach to rte_eth_dev devices allocated by Primary process for
Ports other than Port-0 in the secondary process.
Save the Primary rte_eth_dev device eth_dev_data as part of txq
structure needed for tx path.
Fixes: 8318984927ff ("cxgbe: add pmd skeleton")
Cc: stable@dpdk.org
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
The current implementation of the Tap PMD doesn't support packet size
grater than 1522B, so no need to set jumbo frames in the Tap features.
Fixes: 04b2c3c94346 ("doc: add tap features")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
Other NICs with VF support do not use the _pf suffix for these files
but just for the VF description.
This change makes NFP files consistent in this regard and helps with
how the DPDK web nics features matrix shows NFP devices.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
This patch adds support for registering and waiting for Rx interrupts.
This allows applications to wait for Rx events from the PMD using the
DPDK rte_epoll subsystem.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
This patch is the last patch in the series of patches aimed
to add support for registering and waiting for Rx interrupts
in failsafe PMD. This allows applications to wait for Rx events
from the PMD using the DPDK rte_epoll subsystem.
The failsafe PMD presents to the application a facade of a single
device to be handled by the application while internally it manages
several devices on behalf of the application including packets
transmission and reception.
The Proposed failsafe Rx interrupt scheme follows this approach.
The failsafe PMD will present the application with a single set of
Rx interrupt vectors representing the failsafe Rx queues, while
internally it will serve as an interrupt proxy for its subdevices.
will allow applications to wait for Rx traffic from the failsafe
PMD by registering and waiting for Rx events from its Rx queues.
In order to support this the following is suggested:
* Every Rx queue in the failsafe (virtual) device will be assigned
* a Linux event file descriptor (efd) and an enable_interrupts flag.
* The failsafe PMD will fill in its rte_intr_handle structure with
the Rx efds assigned previously and register them with the EAL.
* The failsafe driver will create a private epoll fd (epfd) and
* will allocate enough space to handle all the Rx events from all its
subdevices.
* Acting as an application,
for each Rx queue in each active subdevice the failsafe will:
o Register the Rx queue with the EAL.
o Pass the EAL the failsafe private epoll fd as the epfd to
register the Rx queue event on.
o Pass the EAL, as a parameter, the pointer to the failsafe Rx
queue that handles this Rx queue.
o Using the DPDK service callbacks, the failsafe PMD will launch
an Rx proxy service that will Wait on the epoll fd for Rx
events from the sub-devices.
o For each Rx event received the proxy service will
- Retrieve the pointer to failsafe Rx queue that handles
this subdevice Rx queue from the user info returned by the
EAL.
- Trigger a failsafe Rx event on that queue by writing to
the event fd unless interrupts are disabled for that queue.
* The failsafe pmd will also implement the rx_queue_intr_enable
* and rx_queue_intr_disable routines that will enable and disable Rx
interrupts respectively on both on the failsafe and its subdevices.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This patch lays the groundwork for this driver (draft documentation,
copyright notices, code base skeleton and build system hooks). While it can
be successfully compiled and invoked, it's an empty shell at this stage.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
This commit support the new Tx offloads API.
The code which fills in txq_flags in default_txconf is preserved
because rte_eth_dev_info_get() lacks conversion between offloads
and txq_flags fields which means that a legacy application which
relies on default_txconf will fail to configure Tx queues in the
case when some bits in txq_flags are mandatory.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In the case of tunnel packet, PKT_RX_{IP,L4}_CSUM_* flags correspond
to inner packet checksums. There is only one flag to indicate bad
external IPv4 header checksum.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Implemented the 'time_sync' related APIs for supporting the PTP
protocol.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The feature was added at the end of the table.
And the description was between the anchor _nic_features_timesync
and its title.
It is moved near related features with a new anchor.
It is also renamed from "mbuf fast free" to "fast mbuf free".
Fixes: d6f90afd3070 ("ethdev: add mbuf fast free Tx offload")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The features described for scalar fm10k and its vector implementations
are the same.
No need to distinguish them in features description.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch adds hardware offloading support for IPV4, UDP and TCP checksum
verification, including inner/outer checksums on supported tunnel types.
It also restores packet type recognition support.
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch adds hardware offloading support for IPv4, UDP and TCP checksum
calculation, including inner/outer checksums on supported tunnel types.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
