As APIs in rte_vdpa.h are public, we need to add doxygen comments
to all APIs and structures.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The notification can't be disabled in packed ring when
application tries to disable notification, because the
device event flags field is overwritten by an unexpected
value. This patch fixes this issue.
Fixes: b1cce26af1 ("vhost: add notification for packed ring")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Offload following modify MAC address actions to E-Switch
via TC-Flower driver
- RTE_FLOW_ACTION_TYPE_SET_MAC_SRC
- RTE_FLOW_ACTION_TYPE_SET_MAC_DST
The corresponding rte_flow_item_eth must be present in
rte_flow pattern
Only support modify outer layer MAC address
The example testpmd command is:
flow create 0 transfer ingress
pattern eth / ipv4 / udp dst is 7000 / end
actions set_mac_dst mac_addr dd:00:aa:11:bb:33 /
set_mac_src mac_addr bb:00:cc:11:aa:22 /
port_id id 1 / end
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
add commands to support following actions:
- RTE_FLOW_ACTION_TYPE_SET_MAC_SRC
- RTE_FLOW_ACTION_TYPE_SET_MAC_DST
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
rte_flow actions:
- RTE_FLOW_ACTION_TYPE_SET_MAC_SRC
- RTE_FLOW_ACTION_TYPE_SET_MAC_DST
added in order to offload to NIC
The rte_flow_itme_eth must be present in rte_flow pattern
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Offload following modify TTL actions to E-Switch via
TC-Flower driver
- RTE_FLOW_ACTION_TYPE_SET_TTL
- RTE_FLOW_ACTION_TYPE_DEC_TTL
The corresponding IP protocol rte_flow_item_ipv[4|6]
must be present in rte_flow pattern otherwith PMD
return error
The example testpmd commands are:
flow create 0 transfer ingress
pattern eth / ipv4 / udp dst is 7000 / end
actions dec_ttl /
port_id id 1 / end
flow create 0 transfer ingress
pattern eth / ipv4 / udp dst is 7001 / end
actions set_ttl ttl_value 10 /
port_id id 1 / end
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
rewrite TTL by decrease or just set it directly
it's not necessary to check if the final result
is zero or not
This is slightly different from the one defined
by openflow and more generic
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Primary and secondary processes share a per-device private data. With
current design it is not possible to have data per-device per-process.
This is required for handling properly the CPP interface inside the NFP
PMD with multiprocess support.
There is also at least another PMD driver, tap, with similar
requirements for per-process device data.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When using uio_pci_generic module or using legacy interrupt mode of
igb_uio or vfio, X550 cannot get interrupts. Because the Interrupt
Status bit is not implemented, then the irq cannot be handled correctly
and cannot report the event fd to DPDK apps.
Add this hw limitation and details into ixgbe known issue.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Implement RTE_FLOW_ACTION_TYPE_MAC_SWAP to offload flows with
action to swap the source and destination MAC addresses in the
outermost Ethernet header.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Attempt to allocate smaller chunk of mbufs when larger amount is
not available. Report error when small chunk not available.
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
The cmdline settings of port-numa-config and rxring-numa-config have
been flushed by the following init_config. If we don't configure the
port-numa-config, the virtual device will allocate the device ports to
socket 0. It will cause failure when the socket 0 is unavailable.
eg:
testpmd -l <cores from socket 1> --vdev net_pcap0,iface=lo
--socket-mem=64 -- --numa --port-numa-config="(0,1)"
--ring-numa-config="(0,1,1),(0,2,1)" -i
...
Configuring Port 0 (socket 0)
Failed to setup RX queue:No mempool allocation on the socket 0
EAL: Error - exiting with code: 1
Cause: Start ports failed
Fix by allocate the devices port to the first available socket or the
socket configured in port-numa-config.
Fixes: 487f9a592a ("app/testpmd: fix NUMA structures initialization")
Fixes: 20a0286fd2 ("app/testpmd: check socket id validity")
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Now that logging of initialization is controlled by dynamic debug
level, remove the #ifdef for RTE_LIBRTE_QEDE_DEBUG_INIT since that
config option does not exist in common_base and is not documented.
Fixes: 69b6573980 ("net/qede: implement dynamic logging")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The config options for init and debug driver were replaced by
dynamic log levels.
Fixes: 70e28c612d ("net/liquidio: implement dynamic logging")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The ena driver has used dynamic log type to enable init debugging since
18.05 but the documentation still has leftover mention of the config
option.
Fixes: 8bc0acae97 ("net/ena: implement dynamic logging")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
DEBUG_DUMP_DESC flag is enabled/disabled from Makefile and enabling it
causing the build issue.
Add the missed 'volatile' keyword to avoid the warning for type
mismatch, which will be treated as compiler error if WERROR_FLAGS
is enabled.
Fixes: bfd38e4d70 ("net/avf: fix missing compiler error flags")
CC: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
If the build environment doesn't have 'linux/tc_act/tc_pedit.h' header,
compiler will use needed structs defined in mlx5_flow_tcf.c.
However, there is a zero-size array defined in one struct and
ISO C forbids this when -Wpedantic is set by debug mode.
Simply put __extension__ keyword before the struct in question.
Fixes: 2ed2fe5f0a ("net/mlx5: rewrite IP address UDP/TCP port by E-Switch")
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
rte_flow has 'group' attribute and 'jump' action in order to support
multiple groups. This feature is known as multi-table support ('chain' in
linux TC flower) in general because a group means a table of flows. Example
commands are:
flow create 0 transfer priority 1 ingress
pattern eth / vlan vid is 100 / end
actions jump group 1 / end
flow create 0 transfer priority 1 ingress
pattern eth / vlan vid is 200 / end
actions jump group 2 / end
flow create 0 transfer group 1 priority 2 ingress
pattern eth / vlan vid is 100 /
ipv4 dst spec 192.168.40.0 dst prefix 24 / end
actions drop / end
flow create 0 transfer group 1 priority 2 ingress
pattern end
actions of_pop_vlan / port_id id 1 / end
flow create 0 transfer group 2 priority 2 ingress
pattern eth / vlan vid is 200 /
ipv4 dst spec 192.168.40.0 dst prefix 24 / end
actions of_pop_vlan / port_id id 2 / end
flow create 0 transfer group 2 priority 2 ingress
pattern end
actions port_id id 2 / end
With theses flows, if a packet having vlan 200 and src_ip as 192.168.40.1,
this packet will firstly hit the 1st flow. Then it will hit the 5th flow
because of the 'jump' action. As a result, the packet will be forwarded to
port 2 (VF representor) with vlan tag being stripped off. If the packet had
vlan 100 instead, it would be dropped by the 3rd flow.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Release notes for Aquantia atlantic driver.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
This patch add support for dumping MAC registers.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for EEPROM reading/writing.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
VLAN filters and VLAN offloads implementation.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for adding/removing MAC addresses.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for flow control feature.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for Receive Side Scaling feature.
RSS hash and reta table configuration.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for promiscuous/allmulticast modes configuration.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for Rx/Tx descriptors status information.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for device stats, xstats and queue stats
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Implement link interrupt, link info, link polling.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add RX/TX function prototypes for further datapath development.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Start, stop and reset are all done via hw_atl layer.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
This is hw_atl logic layer derived from linux atlantic
driver. It contains RX/TX hardware initialization
sequences, various hw configuration.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
AQC NICs comes in fields with two major
FW generations: 1x and 3x.
This is part of linux atlantic driver shared code,
responsible for internal NIC firmware interactions,
including link management ops, FW initialization,
various lifecycle features.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
This patch introduces hw_atl layer which is maintained
in sync with linux kernel driver.
It will generally be in sync with linux upstream.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add implementation for hardware registers access routines.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Implement logging macroses for debug purposes.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Makefile/meson build infrastructure, atl_ethdev minimal skeleton,
header with aquantia aQtion NIC device and vendor IDs.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
- track whether counter DMAs are active or not so they can be stopped if
needed before DMA memory is freed
- fix counter DMA shut-down by changing vnic_dev_counter_dma_cfg() to
take the number of counters to DMA instead of high counter index and
use num counters = 0 to shut off DMAs
- remove unnecessary checks that DMA counter memory is valid and that
counter DMAs are in use
- change the minimum DMA period to match what 1400 series adapter is
capable of
- fix comments and change a couple variable names to make more sense
Fixes: 86df6c4e2f ("net/enic: support flow counter action")
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
If QAT crypto pmd failed to be created due to reaching MAX
cryptodevs it prevented QAT comp PMD being created. And vice versa.
Change to warning in these cases and allow the other PMD to be created.
Fixes: c0c90bc4ca ("compress/qat: add create and destroy functions")
Cc: stable@dpdk.org
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Cel <tomaszx.cel@intel.com>
This patch fixes the cryptodev library version number that was
missed updating in DPDK 18.08.
Fixes: a4493be5bd ("cryptodev: replace bus specific struct with generic dev")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the validation test cases for
CAAM JR driver
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Akhil Goyal <akhil.goyal@nxp.com>
add caam jr driver details, supported features and algorithms
in the document.
release note and MAINTAINERS are also updated.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch provides the support for protocol offload
to the hardware. following security operations are
added:
- session_create
- session_destroy
- capabilities_get
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
