This patch introduces armada target to address difference
in number of cores, no numa support
Signed-off-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Alan Winkowski <walan@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gavin Hu <gavin.hu@arm.com>
Per armv8 crypto extension support, make build always enable it by default
as long as compiler supports the feature while meson build only enables it
for 'default' machine of generic armv8 architecture.
It is known that not all the armv8 platforms have the crypto extension. For
example, Mellanox BlueField has a variant which doesn't have it. If crypto
enabled binary runs on such a platform, rte_eal_init() fails.
'+crypto' flag currently implies only '+aes' and '+sha2' and enabling it
will generate the crypto instructions only when crypto intrinsics are used.
For the devices supporting 8.2 crypto or newer, compiler could generate
such instructions beyond intrinsics or asm code. For example, compiler can
generate 3-way exclusive OR instructions if sha3 is supported. However, it
has to be enabled by adding '+sha3' as of today.
In DPDK, armv8 cryptodev is the only one which requires the crypto support.
As it even uses external library of Marvell which is compiled out of DPDK
with crypto support and there's run-time check for required cpuflags,
crypto support can be disabled in DPDK.
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
The meson build never checked for the presence of rdrand and rdseed
instructions, while make build never checked for rdseed. Ensure builds
always have the appropriate checks - and therefore defines - for these
instructions. For runtime, we also add in rdseed to the list of known
bits returned from cpuid() instruction, so we can confirm its presence at
application init time.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Rather than checking flag by flag individually, use a loop to make it
easier to check new flags.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
To improve code quality we want to turn on as many warnings as we can in
the DPDK code, so turn on the "unused-parameter" warning in meson builds to
match that of the make builds. To ensure correct compilation, disable the
warning selectively for driver base code that otherwise would have issues.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Current design requires kernel drivers and they need to be probed by
Linux up to some level so that they can be usable by DPDK for ethtool
support, this requires maintaining the Linux drivers in DPDK.
Also ethtool support is limited and hard, if not impossible, to expand
to other PMDs.
Since KNI ethtool support is not used commonly, if not used at all,
removing the support for the sake of simplicity and maintenance.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
If libbsd is enabled in DPDK, the strlcpy and strlcat functions in
rte_string_fns.h redirect to the varients in libbsd, only using the
fallbacks if it is not enabled. Therefore, if libbsd is enabled, it needs
to be called out as a DPDK dependency in the pkgconfig file.
To ensure that we don't have undefined variables on non-Linux platforms, we
can remove the linux condition around the libbsd check - no harm comes in
looking for it on other OS, since it's an optional dependency.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The post-install script to symlink the PMDs from their own PMD directory to
the regular lib directory (so they would be found by ld at runtime) was
using the "-r" flag to ln to create relative symlinks. This flag is
unsupported by ln on FreeBSD causing the ninja install step to fail.
Reworking the script to take the relative driver path as parameter removes
the need for ln to calculate the relative path ensuring compatibility with
FreeBSD.
As part of the fix, we move the registration of the install script to the
config/meson.build file, from the top level one. This improves readability
as the script takes as parameters the variables set in that file.
Fixes: ed4d43d73e ("build: symlink drivers to library directory")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Just syntax change to reduce indentation, no functional change.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
On Skylake platform, with native build, KNI kernel module crashes
because of the corrupted values passed to kernel module.
The corruption occurs because the userspace kni library works
unexpectedly. Compiler [1] is using AVX512 instructions and generated
binary is wrong [2].
It turned around gcc does its job correct, but gas is generating binary
wrong. And expected binutils 2.30, 2.31 & 2.31.1 are affected. Issue has
been fixed in binutils 2.32 with:
Commit x86: don't mistakenly scale non-8-bit displacements
AVX512 was already disabled with bintuils 2.30 [3], extending it to
2.31 & 2.31.1 too.
[1] gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2)
[2] gcc bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90028
[3] Bugzilla ID 97 has the details.
Bugzilla ID: 249
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The '-mno-avx512f' compiler flag is not passed to the compiler,
detection of the binutils and setting flags works fine, but the flag
itself not used by compiler.
Removing the interim 'march_opt' variable and using directly
'machine_args' and setting '-mno-avx512f' to 'machine_args'
Fixes: 566b4d7a96 ("build: fix meson check for binutils 2.30")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add RCU library supporting quiescent state based memory reclamation method.
This library helps identify the quiescent state of the reader threads so
that the writers can free the memory associated with the lock less data
structures.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Mellanox BlueField is armv8 CPU having cortex-a72. The implementor ID is
0x41 (arm) and the primary part number is 0xd08 (cortex-a72).
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Current default cache line size for armv8 CPUs having Implementor ID of
0x41 is 128 bytes, changing it to 64 bytes. Also, the max number of lcores
is changed to 16 from 256.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
When building for generic distribution we need a stable baseline
architecture, or depending on the build worker the result will vary.
Force the default flags if the user explicitly sets machine=default
at configuration time.
Fixes: b1d48c4118 ("build: support ARM with meson")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Define variables for "is_linux", "is_freebsd" and "is_windows"
to make the code shorter for comparisons and more readable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Within EAL we had a series of if statements for selecting the EAL directory
to use. Now that the directory names match those of the OS's they are for
we can instead just use a generated subdirectory name, shortening the code.
To avoid strange errors, we still need to check for unsupported OS's, but
do this check up-front in the config meson.build file.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Currently, RTE_* flags are set based on the implementer ID but there might
be some micro arch specific differences from the same vendor
eg. CACHE_LINESIZE. Add support to set micro arch specific flags.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Add a new PMD driver for AF_XDP which is a proposed faster version of
AF_PACKET interface in Linux. More info about AF_XDP, please refer to [1]
[2].
This is the vanilla version PMD which just uses a raw buffer registered as
the umem.
[1] https://fosdem.org/2018/schedule/event/af_xdp/
[2] https://lwn.net/Articles/745934/
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The current value is 10, which is not sufficient for many use-cases.
e.g. NXP LX2 with raw qdma devices can use 32-48 raw devices in some
use-cases. So, making it to 64 to cover various cases.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The rte_stack library provides an API for configuration and use of a
bounded stack of pointers. Push and pop operations are MT-safe, allowing
concurrent access, and the interface supports pushing and popping multiple
pointers at a time.
The library's interface is modeled after another DPDK data structure,
rte_ring, and its lock-based implementation is derived from the stack
mempool handler. An upcoming commit will migrate the stack mempool handler
to rte_stack.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
This patch adds dynamic SGL allocation instead of static one.
The number of element in SGL can be adjusted in each operation
depend of the request.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds Poll Mode Driver for asymmetric crypto
functions of Intel QuickAssist Technology hardware.
It contains plain driver with no functions implemented, specific
algorithms will be introduced in separate patches.
This patch depends on a QAT PF driver for device initialization. See
the file docs/guides/cryptodevs/qat.rst for configuration details.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Added initial stub source files and required meson changes
for Windows support.
kernel/windows/meson is a stub file added to support
Windows specific source in future releases.
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Signed-off-by: Anand Rawat <anand.rawat@intel.com>
Reviewed-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Harini Ramakrishnan <harini.ramakrishnan@microsoft.com>
Since we have the version number in a separate file at the root level,
we should not need to duplicate this in rte_version.h too. Best
approach here is to move the macros for specifying the year/month/etc.
parts from the version header file to the build config file - leaving
the other utility macros for e.g. printing the version string, where they
are.
For "make", this is done by having a little bit of awk parse the version
file and pass the results through to the preprocessor for the config
generation stage.
For "meson", this is done by parsing the version and adding it to the
standard dpdk_conf object.
In both cases, we need to append a large number - in this case "99",
previously 16 in original code - to the version number when we want to do
version number comparisons. Without this, the release version e.g. 19.05.0
will compare as less than it's RC's e.g. 19.05.0-rc4. With it, the
comparison is correct as "19.05.0.99 > 19.05.0-rc4.99".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
To keep the top-level meson.build file as clean and clear as possible, we
move the version handling to the config/meson.build file, where the rest of
the build configuration is already being set up.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Remove the following warning by comparing string to string.
config/arm/meson.build:153: WARNING: Trying to compare values of
different types (list, str) using ==.
Fixes: c6e536e384 ("build: add more implementers IDs and PNs for ARM")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Rather than using linuxapp and bsdapp everywhere, we can change things to
use the, more readable, terms "linux" and "freebsd" in our build configs.
Rather than renaming the configs we can just duplicate the existing ones
with the new names using symlinks, and use the new names exclusively
internally. ["make showconfigs" also only shows the new names to keep the
list short] The result is that backward compatibility is kept fully but any
new builds or development can be done using the newer names, i.e. both
"make config T=x86_64-native-linuxapp-gcc" and "T=x86_64-native-linux-gcc"
work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the cross files for meson compilation from having linuxapp
in the name to just linux in the name.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the macro and all instances in DPDK code, but keep a copy of
the old macro defined for legacy code linking against DPDK
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the macro to make things shorter and more comprehensible. For
both meson and make builds, keep the old macro around for backward
compatibility.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This is the main patch which renames the macros, functions,
structs and any remaining strings in the iavf code.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enable native/cross compiling for Cortex-A55 and Cortex-A76 on meson.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
pcap has historically shipped a custom pcap-config binary tool which
does the job of pkg-config. It was never compatible with cross
compilation.
Meson uses it when using dependency(), which then means cross
compilation fails.
Set pcap-config to empty in the meson cross compilation files so
that Meson will not use it, and add a fallback in case
dependency() fails.
libpcap 1.9.0 finally ships a pkg-config file so everything will
work out of the box in the future.
Signed-off-by: Luca Boccassi <luca.boccassi@microsoft.com>
Use dependency() instead of manual append to ldflags.
Move libbsd inclusion to librte_eal, so that all other libraries and
PMDs will inherit it.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Allow users and packagers to override the default RTE_MAX_ETHPORTS.
This adds a new meson option, max_ethports which defaults to the
current value.
Signed-off-by: Chas Williams <3chas3@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Rather than relying on the target machine architecture, use the
size of a pointer from the compiler to determine if we are 64-bits
or not. This allows correct behaviour when you pass -m32 as a compile
option. It also allows us to use this value repeatedly throughout the
repo rather than continually testing for the sizeof(void*).
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Acked-by: Luca Boccassi <bluca@debian.org>
This commit reworks the checks for binutils 2.30 and how
the flags to disable AVX512F are passed to the compiler.
Previously the #define for including AVX512 code was set,
while the -mno-avx512f argument was given to the compiler.
This would cause gcc to correctly refuse to emit AVX512
instructions, but the rte_memcpy code that includes AVX512
optimizations was being added to the build.
The check for binutils check is now moved to x86 as it is
irrelevant for other architectures, and the -mno-avx512f
flag is passed to a march_opts array in meson. As the
-mno-avx512 flag is added earlier in the build, the code
in rte_memcpy is no longer attempted to be compiled.
This commit also adds a message print in the meson configure
stage to alert the user of the workaround being employed.
Fixes: a32ca9a4eb ("mk: fix scope of disabling AVX512F support")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
The libraries provided by rdma-core may be statically linked
if enabling CONFIG_RTE_IBVERBS_LINK_STATIC in the make-based build.
If CONFIG_RTE_BUILD_SHARED_LIB is disabled, the applications
will embed the mlx PMDs with ibverbs and the mlx libraries.
If CONFIG_RTE_BUILD_SHARED_LIB is enabled,
the mlx PMDs will embed ibverbs and the mlx libraries.
Support with meson may be added later.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Rename options CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS and
CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS to a single option
CONFIG_RTE_IBVERBS_LINK_DLOPEN.
Rename meson option enable_driver_mlx_glue to ibverbs_link.
There was no good reason for setting a different link option
for mlx4 and mlx5. Having a single common option makes it
easier to understand and unify make and meson systems.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
AVX512 was disabled for GCC because of Bugzilla issue 97 [1],
the GCC defect submitted for the issue [2] highlighted that this is
a known binutils version 2.30 issue.
Narrowed the scope of no-avx512 to the this specific binutils version.
[1]
https://bugs.dpdk.org/show_bug.cgi?id=97
[2]
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88096
Fixes: 8d07c82b23 ("mk: disable gcc AVX512F support")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Introduce librte_ipsec library.
The library is supposed to utilize existing DPDK crypto-dev and
security API to provide application with transparent IPsec processing API.
That initial commit provides some base API to manage
IPsec Security Association (SA) object.
Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This commit includes the add of:
- ConnectX-6 device ID
- ConnectX-6 SRIOV device ID
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Normally when starting/stopping the device the queue
should be started and stopped. Support them both in
this patch.
Below ops are added,
dev_configure
dev_start
dev_stop
dev_close
dev_reset
rx_queue_start
rx_queue_stop
tx_queue_start
tx_queue_stop
rx_queue_setup
rx_queue_release
tx_queue_setup
tx_queue_release
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
