i40e HW data is gotten wrongly in i40evf_dev_stop function,
it may cause device can't be stopped.
This patch is to fix the issue.
Fixes: 185993420249 ("net/i40e: fix VF add/del MAC")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
As no matter the PF host driver is DPDK or other kernel drivers,
they are sharing the same virtchnnl interfaces to communicate to VFs.
To follow the generic interface, DPDK PF need to set Interrupt
Throttling (ITR) index according to the rxitr_idx from virtchnnl
instead of ITR_NONE.
Fixes: 6d59e4ea74a6 ("net/i40e: change version number to support Linux VF")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Since there's no specific version number to distinguish
DPDK PF and Linux kernel PF, DPDK VF won't recognize if
host is DPDK PF or kernel PF. The specific virtual channel
commands for DPDK pf can be deleted.
This patch removes I40E_VIRTCHNL_OP_CFG_VLAN_PVID.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Currently, rte_eth_dev_mac_addr_add is used by a testpmd CLI
to add a MAC address for VF. But the parameter 'pool' of this
API means the VMDq pool, not VF.
So, it's wrong to use it to add the VF MAC address.
This patch provides a new API that can be used to
add VF MAC address on i40e.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Flow control watermark is not read out correctly,
that may cause an application who not intend to change
watermark but does change it with a rte_eth_dev_flow_ctrl_set
call right after rte_eth_dev_flow_ctrl_get.
The idea fix is, during init, the watermark is set with default value,
so it is not necessary to read out from hw register during flow_ctl_get,
But due to I40E_GLRPB_GHW limitation, it is shared by different ports on
the same device, it is possible the value is changed on another port,
but local variable not sync, so we have to read out register every
flow_ctl_get.
Fixes: f53577f06925 ("i40e: support flow control")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Calling i40e_vsi_delete_mac without checking return
value (as is done elsewhere 5 out of 6 times)
Coverity issue: 140735
Fixes: 43c89d5a4fde ("net/i40e: set VF MAC from PF")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reset a NIC by calling dev_uninit() and then dev_init().
Go through the same way in NIC PCI remove without release
of ethdev resource and then NIC PCI probe function without
ethdev resource allocation.
Signed-off-by: Wei Dai <wei.dai@intel.com>
This reverts commit 035a8cf88f010c82de3040c895c801ce0849b065.
Don't send messages to inactive VF will cause DPDK PF failing
to send messages to kernel VF.
With this revert, this issue will be solved.
Fixes: 035a8cf88f01 ("net/i40e: fix PF notify when VF is not up")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Buffer length be configured for each data segment should not exceed
the requested value, or device may fill data that exceed the boundary
of memory that be reserved.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Tested-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
This patch stops PF from sending messages to inactive VF
and modifies VF state to active when VF reset is completed.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Some phy's take longer than others to come up. Add a retry to give
more phy's a chance to come up before returning an error.
Fixes: 2209c3e2c275 ("net/i40e: avoid PCI probing failure when using bogus SFP")
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Enable the functions set link down and set link up in i40e by check
phy_type, and fix the issue of auto negotiation failed in XXV710 when
bind kernel driver after unbind from DPDK driver by modify the speed
setting distinguish from set link up and down. With this fix, if unbind
DPDK to bind kernel driver, no need to set auto negotiation and ifconfig
up anymore, remove the part from doc.
Fixes: ca7e599d4506 ("net/i40e: fix link management")
Fixes: 2f1e22817420 ("i40e: skip link control as firmware workaround")
Fixes: 6e145fcc754b ("i40e: support autoneg or force link speed")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
If there's no Traffic Management node added. Not
necessary to check if TM is committed.
Fixes: cac29c3c00a4 ("net/i40e: support committing TM hierarchy")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
i40e VF close would stop the VF first, if VF already stopped this
result duplicate add/del MAC address which cause failure in executing
admin command.
Fix this by adding VF stop status check and sync up VF MAC address count
during add/del.
Fixes: d42aaf30008b ("i40e: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Previously SW workaround for GL_SWR_PRI_JOIN_MAP is added for X710
performance. As new FW version 6.0 supports ADQ,
value for GL_SWR_PRI_JOIN_MAP should be changed, otherwise
ehtertype filter will be impacted.
Fixes: 973273c7a4b7 ("i40e: workaround for X710 performance")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
PF driver and VF driver communicated with each other by virtual
channel message. When VF sends message to PF to enable some
offload capability, PF should response if it is successful or not.
VIRTCHNL_OP_ENABLE_VLAN_STRIPPING is a new added message and the
old PF driver doesn’t support that. So no response is received by
DPDK VF. Then VF is blocked on this message and cannot roll back.
This patch clears pending command on VF side when the waiting duration
expires to avoid blocking following communication.
Fixes: 5f0b95d59a98 ("net/i40e: support VLAN stripping for VF")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
There's only invalid queue id checking for PF when creating FDIR
rules, this patch adds checking invalid queue id for VF.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
If LSC flag is changed to off at last device start, the
enable flag is not cleared in HW.
This patch fixes it.
Fixes: f4668a33efe5 ("net/i40e: fix link status change interrupt")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tx CRC size is not counted by VSI's stats register, so it is not necessary
excluded by driver.
Fixes: 98abce237ba7 ("net/i40e: fix VF statistics")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add the support of the Traffic Management API,
rte_tm_hierarchy_commit.
When calling this API, the driver tries to enable
the TM configuration on HW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To support QoS scheduler APIs, create a new C file for
the TM (Traffic Management) ops but without any function
implemented.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Internal Rx packet bytes is over counted, CRC size is not excluded,
that cause incorrect Rx bytes or even negative value.
Fixes: 0bcdc44510ef ("net/i40e: exclude internal packet's byte count")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
VLAN stripping configuration is supported only for DPDK PF
previously. Since kernel PF supports VLAN stripping now, this
patch adds VLAN stripping support for both DPDK PF and kernel
PF.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
In function i40e_vsi_config_tc_queue_mapping(), if 'enabled_tcmap' is 0,
'total_tc' might be 0. Then 'total_tc' might be used in a division
by 0 in "qpnum_per_tc = i40e_align_floor(vsi->nb_qps / total_tc)".
Fix it by changing 'total_tc' from 0 to 1 just as func
i40e_vsi_update_queue_mapping() does.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds ability to remove already loaded profile
or write profile without registering it
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
TPID can be set by set_switch_config aq, change the TPID setting
by set_switch_config on new FW release.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds extended processing of DDP packages:
- Execution of adminq command sections to support AQ-depended profiles,
for example, for programming cloud filters types.
- Ability to write a profile without registering it in the list of
applied profiles, to be used for AQ-depended profiles.
- Profile rollback is implemented to support restoration of original
parser/analyzer configuration without the need of core reset,
for example, for deploying new profile without resetting device.
- Search for a specific section in a profile, to be used by driver
to access metadata sections with description of PCTYPE/PTYPEs
defined in the profile.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch allows detection of upcoming core reset in case NIC gets
stuck while performing FLR reset. The i40e_pf_reset() function returns
I40E_ERR_NOT_READY when global reset was detected.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Instead of accessing register directly, use newly added AQC in
order to blink LEDs. Introduce and utilize a new flag to prevent
excessive API version checking.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Adds double VLAN tagging ethertype fields to Set Switch Parameters AQ
command. These were added in firmware API 1.7.
Callers of i40e_aq_set_switch_config() can specify the ethertypes to
use by filling out the corresponding fields in struct i40e_hw.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
