The 1.7 DPDK_SampleApp_UG document in MSWord has been converted to rst format for
use with Sphinx. There is an rst file for each chapter and an index.rst file
which contains the table of contents.
The top level index file has been modified to include this guide.
This document contains some png image files. If any of thes png files are modified
they should be replaced with an svg file.
This is the fifth document from a set of 6 documents.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
The 1.7 DPDK_TestPMD_App_UG document in MSWord has been converted to rst format for
use with Sphinx. There is an rst file for each chapter and an index.rst file
which contains the table of contents.
The top level index file has been modified to include this guide.
This is the fourth document from a set of 6 documents.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch first adds architecture specific directories to eal.
Then split the atomic operations to architecture specific and generic files.
Architecture specific files are put into the corresponding architecture
directory and common header are put into generic directory.
Update documentation generation with new generic/ directory.
Signed-off-by: Chao Zhu <bjzhuc@cn.ibm.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The 1.7 DPDK_Release_Notes document in MSWord has been converted to rst format for
use with Sphinx. There is an rst file for each chapter and an index.rst file
which contains the table of contents.
The top level index file has been modified to include this document.
This is the third document from a set of 6 documents
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
The 1.7 DPDK_FreeBSD_GSG document in MSWord has been converted to rst format for
use with Sphinx. There is an rst file for each chapter and an index.rst file
which contains the table of contents.
The top level index file has been modified to include this guide.
This is the second document from a set of 6 documents.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
The 1.7 DPDK_Linux_GSG document in MSWord has been converted to rst format for
use with Sphinx. There is an rst file for each chapter and an index.rst file
which contains the table of contents.
This is the first document from a set of documents.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add minimal configuration and index to validate new rules
inside "make doc" and "make doc-clean".
RTE_SPHINX_BUILD can be overriden.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
A doxygen group begins with /**@{*/ and ends with /**@}*/.
By enabling DISTRIBUTE_GROUP_DOC, the first comment is applied
to each undocumented member of the group.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It seems that RTE_MBUF_SCATTER_GATHER is not the proper name for the
feature it provides. "Scatter gather" means that data is stored using
several buffers. RTE_MBUF_REFCNT seems to be a better name for that
feature as it provides a reference counter for mbufs.
The macro RTE_MBUF_SCATTER_GATHER is poisoned to ensure this
modification is seen by drivers or applications using it.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The Packet Framework pipeline library provides a standard methodology
(logically similar to OpenFlow) for rapid development of complex packet
processing pipelines out of ports, tables and actions.
A pipeline is constructed by connecting its input ports to its output ports
through a chain of lookup tables. As result of lookup operation into the
current table, one of the table entries (or the default table entry, in case
of lookup miss) is identified to provide the actions to be executed on the
current packet and the associated action meta-data.
The behavior of user actions is defined through the configurable table action
handler, while the reserved actions define the next hop for the current packet
(either another table, an output port or packet drop) and are handled
transparently by the framework.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
The stub table is a simple implementation of the Packet Framework table
API that produces lookup miss for all input packets.
It is used as simple cable-type forwarder by the Packet Framework
pipeline library.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Various types of hash tables presented under the Packet Framework toolbox.
Hash table types:
1. Extendible bucket (ext): when bucket is full, bucket is extended with
more keys
2. Least Recently Used (LRU): when bucket is full, the LRU entry is discarded
3. Pre-computed key signature: RX core extracts the key n-tuple from the
packet, computes the key signature and saves the key and key signature
within the packet meta-data; flow classification core performs the actual
lookup (the bucket search stage) after reading the key and key signature
from packet meta-data
4. Signature computed on-the-fly (do-sig version): the same CPU core extracts
the key n-tuple from pkt, computes key signature and performs the table
lookup
5. Configurable key size or optimized for single key size (8-byte, 16-byte
and 32-byte key sizes)
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Routing table for IPv6.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Routing table for IPv4.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
This file defines the operations to be implemented by
any Packet Framework table.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Source port is a packet generator, similar to /dev/zero Linux device.
Sink port is a packet terminator (drops all input packets), similar
to /dev/null Linux device.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
The QoS hierarchical scheduler presented as Packet Framework port.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
The IPv4 reassembly operation is presented as a Packet Framework port.
The code duplication with examples/ip_reassembly sample application
to be addressed soon by linking the relevant library once upstreamed.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
[Thomas: update to new ip_frag library]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This port presents the IPv4 fragmentation operation as a Packet Framework port.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
[Thomas: update to new ip_frag library]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
ring_reader input port (on top of single consumer rte_ring)
ring writer output port (on top of single producer rte_ring)
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
The input port ethdev_reader implements the Packet Framework port API
on top of the Intel DPDK poll mode driver for a NIC RX queue.
The output port ethdev_writer implements the Packet Framework port API
on top of the Intel DPDK poll mode driver for a NIC TX queue.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
This file defines the port operations that have to be implemented
by Packet Framework ports.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
The ACL library is used to perform an N-tuple search over a set of rules with
multiple categories and find the best match for each category.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
[Thomas: some code-style changes]
This adds the code for a new Intel DPDK library for packet distribution.
The distributor is a component which is designed to pass packets
one-at-a-time to workers, with dynamic load balancing. Using the RSS
field in the mbuf as a tag, the distributor tracks what packet tag is
being processed by what worker and then ensures that no two packets with
the same tag are in-flight simultaneously. Once a tag is not in-flight,
then the next packet with that tag will be sent to the next available
core.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: add doxygen @file comment]
The "default" part in configuration filenames is misleading.
Rename this as "native", as this is the RTE_MACHINE that is set in these files.
This should make it clearer for people who build DPDK on a system then run it on
another one.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
It is now possible to build all projects from the examples/ directory
using one command from root directory.
Some illustration of what is possible:
- build examples in the DPDK tree for one target
# install the x86_64-default-linuxapp-gcc in
# ${RTE_SDK}/x86_64-default-linuxapp-gcc directory
user@droids:~/dpdk.org$ make install T=x86_64-default-linuxapp-gcc
# build examples for this new installation in
# ${RTE_SDK}/examples directory
user@droids:~/dpdk.org$ make examples T=x86_64-default-linuxapp-gcc
- build examples outside DPDK tree for several targets
# install all targets matching x86_64-*-linuxapp-gcc in
# ${RTE_SDK}/x86_64-*-linuxapp-gcc directories
user@droids:~/dpdk.org$ make install T=x86_64-*-linuxapp-gcc
# build examples for these installations in /tmp/foobar
user@droids:~/dpdk.org$ make examples T=x86_64-*-linuxapp-gcc O=/tmp/foobar
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This reverts commits
a0cdfcf9 (use pcap-config to guess compilation flags),
ef5b2363 (fix build with empty LIBPCAP_CFLAGS) and
60191b89 (fix build when pcap_sendpacket is unavailable).
These patches are creating more problems than solving the initial one
(which was a build error with too old pcap libraries).
Since old pcap libraries are not that common, just revert them.
Reported-by: Meir Tseitlin <mirots@gmail.com>
Reported-by: Mats Liljegren <mats.liljegren@enea.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Use pcap-config to populate CFLAGS and LDFLAGS.
LIBPCAP_CFLAGS and LIBPCAP_LDFLAGS can be used to override this (useful when
cross-compiling).
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reference the new library in doxygen.
Move also some items from misc to a new basic section.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This will install the binary sdk (bin + modules + libs + headers + mk)
in the specified directory.
This directory can be used as RTE_SDK by external applications.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This variable $(O) can be used to specify a build directory
when doing an "install" procedure. The default is ".", which
means that targets will be built in the source dpdk.
This option is useful to compile outside of the source tree that may be
read-only.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This is a cheat sheet to build DPDK and can be used for a "make help".
It is explicitly described as a build help in order to concatenate it
with other helps such as test commands.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Ignore __attribute__ because it was wrongly parsed as an identifier.
This configuration is described in
http://www.stack.nl/~dimitri/doxygen/manual/preprocessing.html
Reported-by: Cyril Cressent <cyril.cressent@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Some functions are available only if RTE_MBUF_SCATTER_GATHER is enabled.
So it must be configured for doxygen parser.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
- add index page
- add doxygen configuration for API
- add doxygen CSS customization applied by a script
- HTML generation via make rules
The configuration is splitted in a static file and a make rule in order to
dynamically configure output format and path.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
