Add ops link_update.
LSC interrupt is also enabled in this patch.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Normally when starting/stopping the device the queue
should be started and stopped. Support them both in
this patch.
Below ops are added,
dev_configure
dev_start
dev_stop
dev_close
dev_reset
rx_queue_start
rx_queue_stop
tx_queue_start
tx_queue_stop
rx_queue_setup
rx_queue_release
tx_queue_setup
tx_queue_release
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Previously, the features list was indicating unsupported ENA PMD
features and were missing few ones, that were actually supported.
The features file was updated, so it is now reflecting current driver
state.
The documentation was updated with the more actual example and features,
especially ones which are ENA and not listed in the features file.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
This patch introduces changes for supporting multiprocess support.
This is trivial for VFs but comes with some limitations for the PF.
Due to restrictions when using NFP CPP interface, just one secondary
process is supported by now for the PF.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The VIC hardware has 64 MAC filters per vNIC, which can be either
unicast or multicast. Use one half for unicast and the other half for
multicast, as the VIC kernel drivers for Linux and Windows do.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Cisco VIC adapters run firmware. Add the fw_version_get handler to
help diagnostics.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
This patch add support for dumping MAC registers.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for EEPROM reading/writing.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
VLAN filters and VLAN offloads implementation.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for adding/removing MAC addresses.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for flow control feature.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for Receive Side Scaling feature.
RSS hash and reta table configuration.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for promiscuous/allmulticast modes configuration.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for Rx/Tx descriptors status information.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for device stats, xstats and queue stats
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Implement link interrupt, link info, link polling.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add RX/TX function prototypes for further datapath development.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Start, stop and reset are all done via hw_atl layer.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Makefile/meson build infrastructure, atl_ethdev minimal skeleton,
header with aquantia aQtion NIC device and vendor IDs.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add enetc usage document to compile and run the
DPDK application on enetc supported platform.
This document introduces the enetc driver, supported
platforms and supported features.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add callback for updating information about link status/info.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Zyta Szpak <zr@semihalf.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add part of PMD for actual reception/transmission.
Signed-off-by: Yelena Krivosheev <yelena@marvell.com>
Signed-off-by: Dmitri Epshtein <dima@marvell.com>
Signed-off-by: Zyta Szpak <zr@semihalf.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
set_mc_addr_list method is not implemented by the driver yet.
Fixes: a46f8d584eb8 ("net/failsafe: add fail-safe PMD")
Cc: stable@dpdk.org
Signed-off-by: Evgeny Im <evgeny.im@oktetlabs.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
