Secondary processes are expected to use queues and other resources
allocated by the primary, however Verbs resources can only be shared
between processes when inherited through fork().
This limitation can be worked around for TX by configuring separate queues
from secondary processes.
Signed-off-by: Or Ami <ora@mellanox.com>
Add driver functions to set link state up or down.
Burst functions are updated to make sure applications cannot attempt to
send/receive after link is brought down.
Signed-off-by: Or Ami <ora@mellanox.com>
Add a new API rte_eth_dev_get_supported_ptypes to query what packet types
can be filled by a given device. The device should be already started or
its PMD RX burst function already decided, since the packet types supported
may vary depending on RX function.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
RSS configuration should not be freed when priv is NULL.
Fixes: 2f97422e77 ("mlx5: support RSS hash update and get")
Signed-off-by: Or Ami <ora@mellanox.com>
Allows HW to strip the 802.1Q header from incoming frames and report it
through the mbuf structure.
This feature requires MLNX_OFED >= 3.2.
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Until now, broadcast frames were handled like unicast. Moving the related
flow to the special flows table frees up the related unicast MAC entry.
The same method is used to handle IPv6 multicast frames.
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Merge redundant code by adding a static initialization table to manage
promiscuous and allmulticast (special) flows.
New function priv_rehash_flows() implements the logic to enable/disable
relevant flows in one place from any context.
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The following error occurs when CONFIG_RTE_LIBRTE_MLX5_DEBUG=y:
drivers/net/mlx5/mlx5.c:381:4: error: ISO C forbids braced-groups within expressions
RTE_MIN() uses the non-standard ({ ... }) syntax to declare variables within
parentheses, which is rejected by -pedantic.
Since the RSS_INDIRECTION_TABLE_SIZE check is meant to go away as soon as
DPDK supports larger/variable indirection tables, put it in a separate
condition.
Fixes: 634efbc2c8 ("mlx5: support RETA query and update")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Use new function rte_eth_copy_pci_info.
Copy device info for the following pdevs:
bnx2x
cxgbe
e1000
enic
fm10k
i40e
ixgbe
mlx4
mlx5
virtio
vmxnet3
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
ConnectX-4 adapters do not have a constant indirection table size, which is
set at runtime from the number of RX queues. The maximum size is retrieved
using a hardware query and is normally 512.
Since the current RETA API cannot handle a variable size, any query/update
command causes it to be silently updated to RSS_INDIRECTION_TABLE_SIZE
entries regardless of the original size.
Also due to the underlying type of the configuration structure, the maximum
size is limited to RSS_INDIRECTION_TABLE_SIZE (currently 128, at most 256
entries).
A port stop/start must be done to apply the new RETA configuration.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Add interrupts handler for port status notification.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
DPDK expects to have an RSS hash key per flow type (IPv4, IPv6, UDPv4,
etc.), to handle this the PMD must keep a table of hash keys to be able
to reconfigure the queues at each start/stop call.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
First implementation of rss_hash_update and rss_hash_conf_get, those
functions still lack in functionality but are usable to change the RSS
hash key. For now, the PMD does not handle an indirection table for
each kind of flow (IPv4, IPv6, etc.), the same RSS hash key is used
for all protocols. This situation explains why the rss_hash_conf_get
returns the RSS hash key for all DPDK supported protocols and why the
hash key is set for all of them too.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Use the maximum size of the indirection table when the number of requested
RX queues is not a power of two, this help to improve RSS balancing.
A message informs users that balancing is not optimal in such cases.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The new Verbs RSS API is lower-level than the previous one and much more
flexible but requires RX queues to use Work Queues (WQs) internally instead
of Queue Pairs (QPs), which are grouped in an indirection table used by a
new kind of hash RX QPs.
Hash RX QPs and the indirection table together replace the parent RSS QP
while WQs are mostly similar to child QPs.
RSS hash key is not configurable yet.
Summary of changes:
- Individual DPDK RX queues do not store flow properties anymore, this info
is now part of the hash RX queues.
- All functions affecting the parent queue when RSS is enabled or the basic
queues otherwise are modified to affect hash RX queues instead.
- Hash RX queues are also used when a single DPDK RX queue is configured (no
RSS) to remove that special case.
- Hash RX queues and indirection table are created/destroyed when device
is started/stopped in addition to create/destroy flows.
- Contrary to QPs, WQs are moved to the "ready" state before posting RX
buffers, otherwise they are ignored.
- Resource domain information is added to WQs for better performance.
- CQs are not resized anymore when switching between non-SG and SG modes as
it does not work correctly with WQs. Use the largest possible size
instead, since CQ size does not have to be the same as the number of
elements in the RX queue. This also applies to the maximum number of
outstanding WRs in a WQ (max_recv_wr).
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Or Ami <ora@mellanox.com>
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
All MAC RX flows must be updated with VLAN information when configuring a
VLAN filter.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Like most other device control operations, those are handled by the related
kernel network device through syscalls.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Link information is retrieved using ethtool ioctls.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Depending on the MTU and whether jumbo frames are enabled, RX queues may
switch between SG and non-SG modes for better performance.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This commit adds the remaining missing callbacks to make mlx5 usable.
Like mlx4, device start and stop are implemented on top of MAC RX flows.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Francesco Santoro <francesco.santoro@6wind.com>
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
This commit adds support for MAC flow steering rules mandatory for the RX
path as well as the related callbacks to add/remove MAC addresses.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
RSS implementation with parent/child QPs comes from mlx4 and is temporary.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
In its current state, this driver implements the bare minimum to initialize
itself and Mellanox ConnectX-4 adapters without doing anything else
(no RX/TX for instance). It is disabled by default since it is based on the
mlx4 driver and also depends on libibverbs.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Or Ami <ora@mellanox.com>
