A new generic shared actions API may be used to create shared
counter. There is no point to keep duplicate COUNT action specific
capability to create shared counters.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
GCC build with '-O0' on platforms with RTE_ARM_FEATURE_ATOMICS set
failed for:
../lib/librte_efd/rte_efd.c
Assembler messages:
3866: Error: selected processor does not support `crc32cb w0,w0,w1'
3890: Error: selected processor does not support `crc32ch w0,w0,w1'
3914: Error: selected processor does not support `crc32cw w0,w0,w1'
3938: Error: selected processor does not support `crc32cx w0,w0,x1'
This was caused by an architecture specifier added for Clang.
Unlike Clang, GCC considers each inline assembly block to be dependent
and therefore, the architecture specifier impacts assemble of some
blocks require certain extension support.
Removed the architecture for GCC to fix the issue.
Fixes: 8fce34cd0a6a ("eal/arm: fix clang build of native target")
Cc: stable@dpdk.org
Reported-by: Feifei Wang <feifei.wang2@arm.com>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Commit 49b536fc3060 ("eal: load only shared libs from driver plugin directories")
introduced a check that any shared library must ends with .so, but it can't
work, at least, on Fedora/CentOS/RHEL since .so symlinks are not installed
when you install dpdk package, but only when you install dpdk-devel package.
This commit adds also a check for .so.ABI_VERSION to check for shared lib.
See Fedora Packaging Guidelines for more information:
https://docs.fedoraproject.org/en-US/packaging-guidelines/#_devel_packages
Fixes: 49b536fc3060 ("eal: load only shared libs from driver plugin directories")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Ali Alnubani <alialnu@nvidia.com>
Commit 06c7871dde01 ("eal: restrict default plugin path to shared lib mode")
introduced a check that enabled shared lib mode when librte_eal.so can
be loaded, but it can't work, at least, on Fedora/CentOS/RHEL since .so
symlinks are not installed when you install dpdk package, but only when
you install dpdk-devel package.
This commit uses librte_eal.so.ABI_VERSION to check for shared lib,
since it exists on any linux distributions.
See Fedora Packaging Guidelines for more information:
https://docs.fedoraproject.org/en-US/packaging-guidelines/#_devel_packages
Fixes: 06c7871dde01 ("eal: restrict default plugin path to shared lib mode")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Ali Alnubani <alialnu@nvidia.com>
The initialization me->locked=1 in lock() must happen before
next->locked=0 in unlock(), otherwise a thread may hang forever,
waiting me->locked become 0. On weak memory systems (such as ARMv8),
the current implementation allows me->locked=1 to be reordered with
announcing the node (pred->next=me) and, consequently, to be
reordered with next->locked=0 in unlock().
This fix adds a release barrier to pred->next=me, forcing
me->locked=1 to happen before this operation.
Fixes: 2173f3333b61 ("mcslock: add MCS queued lock implementation")
Cc: stable@dpdk.org
Signed-off-by: Diogo Behrens <diogo.behrens@huawei.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Linking with the 'pci' driver when building with MinGW on
Windows fails with undefined symbol 'GUID_DEVCLASS_NET'.
This occurs because devguid.h is included in rte_windows.h
before INITGUID is defined.
Move the include of devguid.h after the definition of INITGUID.
Fixes: b762221ac24f ("bus/pci: support Windows with bifurcated drivers")
Cc: stable@dpdk.org
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Reviewed-by: Tal Shnaiderman <talshn@nvidia.com>
Cleanup code style issue reported by kernel checkpatch. As follows:
* ERROR:CODE_INDENT: code indent should use tabs where possible
* ERROR:SPACING: spaces required around that '?' (ctx:VxE)
* WARNING:INDENTED_LABEL: labels should not be indented
Fixes: b0489e7bca2f ("malloc: fix linear complexity")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
In the experimental function rte_flow_shared_action_destroy()
introduced in DPDK 20.11, the errno ETOOMANYREFS was used.
This errno is not always available on Windows,
so it is preferred using EBUSY instead.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Tal Shnaiderman <talshn@nvidia.com>
Tested-by: Tal Shnaiderman <talshn@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch defines new RSS offload types for eCPRI. For eCPRI with
Message Type 0, the hash field is physical channel ID.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reasons for building not supported generally start with lowercase
because printed as the second part of a line.
Other changes:
- "linux" should be "Linux" with a capital letter.
- ARCH_X86_64 may be simply x86_64.
- aarch64 is preferred over arm64.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The definition of ETOOMANYREFS is reverted as it breaks build of
external applications already defining it.
Fixes: c917b54b0c74 ("eal/windows: add definition of ETOOMANYREFS")
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Reviewed-by: Nick Connolly <nick.connolly@mayadata.io>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
The ETOOMANYREFS errno was missing from the Windows build.
It is used in initialization of flow error structures.
It is defined with the same error code used by WSAETOOMANYREFS.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Replace -w / --pci-whitelist with -a / --allow options
and --pci-blacklist with --block.
The -b short option remains unchanged.
Allow the old options for now, but print a nag
warning since old options are deprecated.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Rename the enum values in the EAL include files.
As a backward compatible temporary migration tool, define
a replacement mapping for old values.
The old names relating to blacklist and whitelist are replaced
by block list and allow list, but applications may be using the
older compatibility macros, marked as deprecated.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Gaetan Rivet <grive@u256.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Fix the detection of instruction pattern with multiple emits followed
by TX. Once detected, this is one of the instruction patterns that is
internally replaced with a single optimized instruction, as long as
none of the instructions to be replaced is referenced by a jump
instruction. The fix enforces this check for the TX instruction of
the pattern.
Fixes: 31035e87b207 ("pipeline: add SWX instruction optimizer")
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch fixes a file descriptor leak which happens
in the error path of vhost_user_set_vring_kick().
Fixes: 4796ad63ba1f ("examples/vhost: import userspace vhost application")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Xueming Li <xuemingl@nvidia.com>
This patch fixes a file descriptor leak which happens
in the error path of vhost_user_set_log_base().
Fixes: 4796ad63ba1f ("examples/vhost: import userspace vhost application")
Cc: stable@dpdk.org
Reported-by: Xuan Ding <xuan.ding@intel.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Xueming Li <xuemingl@nvidia.com>
If an error is encountered before the memory regions are
parsed, the file descriptors for these shared buffers are
leaked.
This patch fixes this by closing the message file descriptors
on error, taking care of avoiding double closing of the file
descriptors. guest_pages is also freed, even though it was not
leaked as its pointer was not overridden on subsequent function
calls.
Fixes: 8f972312b8f4 ("vhost: support vhost-user")
Cc: stable@dpdk.org
Reported-by: Xuan Ding <xuan.ding@intel.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Xueming Li <xuemingl@nvidia.com>
This patches fixes virtqueue initialization issue causing
segfault or file descriptor being closed unexpectedly.
The wrong index was passed to init_vring_queue() by
alloc_vring_queue() when a hole in the virtqueue array was
met.
Fixes: 8acd7c213353 ("vhost: fix virtqueues metadata allocation")
Cc: stable@dpdk.org
Reported-by: Yu Jiang <yux.jiang@intel.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Tested-by: Yu Jiang <yux.jiang@intel.com>
Async inflight packet counter should take failed packets into account.
Failed packets will be deducted in the error handling logic.
Fixes: 6b3c81db8bb7 ("vhost: simplify async copy completion")
Fixes: cd6760da1076 ("vhost: introduce async enqueue for split ring")
Cc: stable@dpdk.org
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
For VxLAN packets, GRO will mistakenly reassemble them
if inner L3 is IPv6, inner L4 is TCP or UDP, and outer L3
is IPv4 because the value of IS_IPV4_VXLAN_TCP4/UDP4_PKT
is true for them.
This fix makes sure IS_IPV4_TCP_PKT, IS_IPV4_UDP_PKT,
IS_IPV4_VXLAN_TCP4_PKT and IS_IPV4_VXLAN_UDP4_PKT can make
decision precisely.
Fixes: e2d811063673 ("gro: support VXLAN UDP/IPv4")
Fixes: 1ca5e6740852 ("gro: support UDP/IPv4")
Fixes: 9e0b9d2ec0f4 ("gro: support VxLAN GRO")
Fixes: 0d2cbe59b719 ("lib/gro: support TCP/IPv4")
Cc: stable@dpdk.org
Signed-off-by: Yi Yang <yangyi01@inspur.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Meson versions >= 0.54.0 include support for handling /implib
with msvc link. Specifying it explicitly causes failures when
linking against the dll. Tested using Link 14.27.29112.0 and
Clang 11.0.0.
There were a number of changes to the way that import libraries
are handled between 0.47.1 and 0.54.0. Only make the change
for >= 0.54.0, leaving the behaviour unchanged for earlier
versions.
Fixes: 77cca7ccec13 ("build: fix drivers library path on Windows")
Cc: stable@dpdk.org
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Tested-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Khoa To <khot@microsoft.com>
When doing Clang build with '-mcpu=native' on N1 platform, build failed
with:
../lib/librte_eal/arm/include/rte_atomic_64.h:76:39:
error: instruction requires: lse
__ATOMIC128_CAS_OP(__cas_128_release, "caspl")
This is because native detection for Neoverse N1 was added in Clang-11.
Prior version of Clang's assembler doesn't know LSE support on hardware.
Fixed this for Clang earlier than version 11 by specifying architecture
for assembler.
Referred to [1] for this fix.
Fixes: 7e2c3e17fe2c ("eal/arm64: add 128-bit atomic compare exchange")
Cc: stable@dpdk.org
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e0d5896bd356cd577f9710a02d7a474cdf58426b
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
The SPAPR IOMMU requires that a DMA window size be defined before memory
can be mapped for DMA. Current code dynamically modifies the DMA window
size in response to every new memory allocation which is potentially
dangerous because all existing mappings need to be unmapped/remapped in
order to resize the DMA window, leaving hardware holding IOVA addresses
that are temporarily unmapped. The new SPAPR code statically assigns
the DMA window size on first use, using the largest physical memory
memory address when IOVA=PA and the highest existing memseg virtual
address when IOVA=VA.
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The mbuf header files had some commenting style errors that affected the
API documentation.
Also, the RTE_ prefix was missing on a macro and a definition.
Note: This patch does not touch the offload and attachment flags that are
also missing the RTE_ prefix.
Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
cmdline_numtype member names clash with Windows system identifiers.
Add RTE_ prefix to cmdline constants to avoid this and possible
future conflicts.
Suggested-by: Ranjit Menon <ranjit.menon@intel.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Jie Zhou <jizh@microsoft.com>
Tested-by: Jie Zhou <jizh@microsoft.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The dynamic flag management is broken if rte_mbuf_dynflag_lookup()
is done in a secondary process because the local pointer to
the memzone is not ever initialized.
Fix it by using the same checks as dynfield_register().
I.e if shared memory zone has not been looked up already,
then discover it.
Fixes: 4958ca3a443a ("mbuf: support dynamic fields and flags")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The ethdev port id is 16 bits now. This patch fixes the data type
of the variable for 'pid', which changing from uint32_t to uint16_t.
RTE_MAX_ETHPORTS is the maximum number of ports, which customized by
the user. To avoid 16-bit unsigned integer overflow, the valid value
of RTE_MAX_ETHPORTS should be set from 0 to UINT16_MAX, and it is
safer to cut one more port from space.
So we use RTE_BUILD_BUG_ON() to ensure that RTE_MAX_ETHPORTS is less
to UINT16_MAX.
Fixes: 5b7ba31148a8 ("ethdev: add port ownership")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Coverity flags that 'rx_conf' variable is used before
it's checked for NULL. This patch fixes this issue.
Coverity issue: 363570
Fixes: 4ff702b5dfa9 ("ethdev: introduce Rx buffer split")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In a flow rule, attribute "transfer" means operation level
at which both traffic is matched and actions are conducted.
Add the very same attribute to shared action configuration.
If a driver needs to prepare HW resources in two different
ways, depending on the operation level, in order to set up
an action, then this new attribute will indicate the level.
Also, when handling a flow rule insertion, the driver will
be able to turn down a shared action if its level is unfit.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrey Vesnovaty <andreyv@nvidia.com>
Updated description of rte_eth_rx_burst() to reflect what drivers,
when using vector instructions, expect from nb_pkts.
Also discussed on the mailing list here:
http://inbox.dpdk.org/dev/98CBD80474FA8B44BF855DF32C47DC35C61257@smartserver.smartshare.dk/
Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
net/ixgbe driver is the only user of the struct rte_eth_l2_tunnel_conf.
Move it to the driver and use ixgbe_ prefix instead of rte_eth_.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The legacy filter API, including rte_eth_dev_filter_supported() and
rte_eth_dev_filter_ctrl() is removed. Flow API should be used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of FDIR filters RTE flow API should be used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Global filter configuration request was supported by net/i40e
driver only to configure GRE key length.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of HASH filter RTE flow API should be used.
Preserve RTE_ETH_FILTER_HASH since it is used in drivers
internally in RTE flow API support.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of TUNNEL filter RTE flow API should be used.
Move corresponding defines and helper structure to ethdev
driver interface since it is still used by drivers internally.
Preserve RTE_ETH_FILTER_TUNNEL because of usage in drivers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of N-tuple filter RTE flow API should be used.
Preserve struct rte_eth_ntuple_filter in ethdev API since
the structure and related defines are used in flow classify
library and a number of drivers.
Preserve RTE_ETH_FILTER_NTUPLE because of usage in drivers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of SYN filter RTE flow API should be used.
Move corresponding definitions to ethdev internal driver API
since it is used by drivers internally.
Preserve RTE_ETH_FILTER_SYN because of it as well.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
net/e1000 driver is the only user of the struct rte_eth_flex_filter
and helper defines. Move it to the driver and use igb_ prefix
instead of rte_eth_.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of EtherType filter RTE flow API should be used.
Move corresponding definitions to ethdev internal driver API
since it is used by drivers internally.
Preserve RTE_ETH_FILTER_ETHERTYPE because of it as well.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
net/i40e driver is the only user of the enum rte_mac_filter_type.
Move the define to the driver and use i40e_ prefix instead of rte_.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of MACVLAN filter RTE flow API should be used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
