This patch adds i40e_flow_parse_tunnel_filter to check
if a rule is a tunnel rule according to items of the
flow pattern, and the function also gets the tunnel info.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds i40e_flow_parse_fdir_filter to check
if a rule is a flow director rule according to the
flow pattern, and the function also gets the flow
director info.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds i40e_flow_validation function to check if
a flow is valid according to the flow pattern.
i40e_flow_parse_ethertype_filter is added first, it also
gets the ethertype info.
i40e_flow.c is added to handle all generic filter events.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add support of restoring ethertype filter in case filter
dropped accidentally, as all filters need to be added and
removed by user obviously for generic filter API.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Currently there's no flow director filter stored in SW. This
patch stores flow director filters in SW with cuckoo hash,
also adds protection if a flow director filter has been added.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Currently there's no tunnel filter stored in SW.
This patch stores tunnel filter in SW with cuckoo
hash, also adds protection if a tunnel filter has
been added.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Currently there's no ethertype filter stored in SW.
This patch stores ethertype filter with cuckoo hash
in SW, also adds protection if an ethertype filter
has been added.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Dseg pointer is not initialized when the first segment is inlined
causing a segmentation fault in such situation.
Fixes: 2a66cf3789 ("net/mlx5: support inline send")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Too much data is uselessly written to the Tx doorbell, which since v16.11
may also cause Tx queues to behave erratically and crash applications.
This regression was seen on VF devices when the BlueFlame buffer size is
zero (txq->bf_buf_size) due to the following change:
- txq->bf_offset ^= txq->bf_buf_size;
+ txq->bf_offset ^= (1 << txq->bf_buf_size);
Fixes: 1d88ba1719 ("net/mlx5: refactor Tx data path")
Fixes: d5793daefe ("net/mlx5: reduce memory overhead for BF handling")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Prefetching completion queue entries is inefficient because too few CPU
cycles are spent before their use, which results into cache misses anyway.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Use fewer instructions to copy the first two bytes of Ethernet headers to
work queue elements.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Gather function prototypes at the beginning of the file.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Let compiler automatically use the vector capabilities of the target
machine to optimize instructions.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Define a single work queue element type that encompasses them all. It
includes control, Ethernet segment and raw data all grouped in a single
place.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Prepare the code to write the Work Queue Element with vectorized
instructions.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Elad Persiko <eladpe@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch includes changes for DCBX like:
- Return empty parameters for oper-params query when negotiation is not
complete
- Use the ieee specific mask value for reading the ethtype value in the
ieee dcbx mode
- Endian-ness conversion is not needed for priority<->TC field, as the
data is already being read/written by ecore in the bigendian way
- While writing the ets config, base driver incorrectly merges the input
values with the operational values. The values should be either set
or unset
- CEE selection field must be set regardless CEE/IEEE mode
- Fail the dcbx query for VF interfaces
- Semantic changes
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add support for 8.14.x.x firmware.
The new firmware adds support for external PHY BCM8485x; configures
fixed link speed with transceiver/cable not supporting negotiation;
supports engine swap; supports overriding PCIe preset equalization
value; checks pause too long for ports and reads die temperature
every second for shutdown threshold.
It includes change in FLR flow when there is a SW initiated FLR.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add PCI IDs for new asic type (defined as CHIP_NUM_AH_xxx).
It supports 50G, 40G, 25G and 10G speeds.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
As part of device probe, check if management FW crash dump logs are
available. If available, then log an warning message and update the
epoch value too. A new struct ecore_mdump_info is added to populate
dump info including the new "reason" field by reading shared memory
region.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add new option called external PBL (page base list) to ecore_chain_alloc
for future use. Mark chain as external if external PBL is provided.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add macros PTR_LO and PTR_HI (for converting pointer to HI and LOW bits for
passing to FW hsi handles).
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
In order to improve Tx switching performance an additional HSI parameter
called same-as-last-id is introduced. This resource allows FW caching the
txqs packet properties. Driver needs to set same-as-last-id to be equal to
the qzone.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Receive indication that VFs are malicious and pass it to the
caller/clients and stop serving those VF's additional resource requests.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add a request for PF Function Level Reset (FLR) before a load request
Fix the location of the PF FLR initiation to be after ecore_get_hw_info()
(which invokes ecore_hw_info_port_num())
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This commits adds:
- Type of service
- Next protocol ID
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Introduce initial software for rte_flow rules.
VLAN, VXLAN are still not supported.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
