Starting in meson 0.56, the functions meson.source_root() and
meson.build_root() are deprecated and to be replaced by the [more
descriptive] functions: project_source_root()/global_source_root() and
project_build_root()/global_build_root(). Unfortunately, these new
replacement functions were only added in 0.56 release too, so to use
them we would need version checks for old/new functions to remove the
deprecation warnings.
However, the functions "current_build_dir()" and "current_source_dir()"
remain unaffected by all this, so we can bypass the versioning problem,
by saving off these values to "dpdk_source_root" and "dpdk_build_root"
in the top-level meson.build file
Bugzilla ID: 926
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Each build, meson would issue a warning reporting that the
"warning_level" setting should be used in place of adding -Wextra
directly to our build commands. Testing with meson 0.61 shows that the
only difference for gcc and clang builds between warning levels 1 and
2 is the addition of -Wextra, so we can remove the warning by deleting
our explicit set of Wextra and changing the build defaults to
warning_level 2.
Fixes: 524a0d5d66 ("build: enable extra warnings with meson")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Meson 0.61.1 is giving warnings that the calls to run_command do not
always explicitly specify if the result is to be checked or not, i.e.
there is a missing "check" parameter. This is because the default
behaviour without the parameter is due to change in the future.
We can fix these warnings by explicitly adding into each call whether
the result should be checked by meson or not. This patch therefore
adds in "check: false" to each run_command call where the result is
being checked by the DPDK meson.build code afterwards, and adds in
"check: true" to any calls where the result is currently unchecked.
Bugzilla ID: 921
Cc: stable@dpdk.org
Reported-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
There is no reason for the DPDK libraries to all have 'librte_' prefix on
the directory names. This prefix makes the directory names longer and also
makes it awkward to add features referring to individual libraries in the
build - should the lib names be specified with or without the prefix.
Therefore, we can just remove the library prefix and use the library's
unique name as the directory name, i.e. 'eal' rather than 'librte_eal'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Switch from using tabs to 4 spaces for meson.build indentation, for the
basic infrastructure and tooling files, as well as doc and kernel
directories.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Bump Meson required version to 0.49.2 which is chosen so as
to be provided by both redhat-8 and debian-10.
Update documentation and travis setup script accordingly.
This fixes the following warning:
WARNING: Project targeting '>= 0.47.1' but tried to use feature introduced
in '0.48.0': console arg in custom_target
'console' argument is used within kernel/linux/kni/meson.build
Signed-off-by: Gabriel Ganne <gabriel.ganne@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
To allow support for additional build checks and tests only really
relevant for developers, we add support for a developer mode option to
DPDK. The default, "auto", value for this enables developer mode if a
".git" folder is found at the root of the source tree - as was the case
with the previous "make" build system. There is also support for
explicitly enabling or disabling this option using "meson configure" if
so desired.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The meson.build files in each example directory is simply to support
building the example as part of the main SDK build, and these should not
be installed with the example's source code and makefile. The exclude of
"meson.build" only filters out the top-level examples/meson.build file,
not the file in each subdirectory.
To fix this, we can build up the list of files to exclude based off the
list of all examples. With this change "find examples/ -name meson.build"
returns no hits when run on an installed instance.
Fixes: e5b95003f1 ("examples: fix flattening directory layout on install")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
To verify that all DPDK headers are ok for inclusion directly in a C file,
and are not missing any other pre-requisite headers, we can auto-generate
for each header an empty C file that includes that header. Compiling these
files will throw errors if any header has unmet dependencies.
For some libraries, there may be some header files which are not for direct
inclusion, but rather are to be included via other header files. To allow
later checking of these files for missing includes, we separate out the
indirect include files from the direct ones.
To ensure ongoing compliance, we enable this build test as part of the
default x86 build in "test-meson-builds.sh".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Use the same interpreter to run pmdinfogen as for other build scripts.
Adjust wrapper script accordingly and also don't suppress stderr from ar
and pmdinfogen. Add configure-time check for elftools Python module for
Unix hosts.
Add pyelftools to CI configuration and build requirements for Linux and
FreeBSD. Windows targets are not currently using pmdinfogen.
Suppress ABI warnings about generated PMD information strings.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Jie Zhou <jizh@microsoft.com>
By installing the examples one-by-one in a loop in the examples
meson.build file we effectively flattened out the structure of the examples
folder and omitted some common and shared subfolders that were never
directly built. Instead, we can remove the loop and just have the whole
"examples" folder installed as-is in a single statement, preserving its
directory structure, and thereby fixing the build of a number of the
examples.
Fixes: 2daf565f91 ("examples: install as part of ninja install")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rather than checking the binutils version number, which can lead to
unnecessary disabling of AVX512 if fixes have been backported to distro
versions, we can instead check the output of "as" from binutils to see if
it is correct.
The check in the script uses the minimal assembly reproduction code posted
to the public bug tracker for gcc/binutils for those issues [1]. If the
binutils bug is present, the instruction parameters - specifically the
displacement parameter - will be different in the disassembled output
compared to the input. Therefore the check involves assembling a single
instruction and disassembling it again, checking that the two match.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90028
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
The node library had a need of being linked as a whole
to make some constructors effective.
Now that all libraries are linked with --whole-archive,
there is no need to have this library separate.
Fixes: e2db26f766 ("build: always link whole DPDK static libraries")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Ahead of changes to rework the file, move the pkg-config file generation to
a new directory under buildtools. This allows the meson code to be
separated out from the main meson.build for simplicity, and also allows any
additional scripts for working with the pkg-config files to be placed there
too.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Sunil Pai G <sunil.pai.g@intel.com>
Since all libraries are explicitly linked as part of a build, we no longer
need to track ones that should be always included for linking against apps.
Previously telemetry was special-cased for linking as it was not directly
needed by the linker when linking the apps, since they never called into it
directly. This meant that it could be forgotten when specifying the app
dependencies, and so the telemetry support would not work. This
special-casing was never needed for make as it always linked in all
libraries, as meson does now.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Sunil Pai G <sunil.pai.g@intel.com>
The global include path, which is used by anything built before EAL,
points to the EAL header files so they utility macros etc. can be used
anywhere in DPDK. This path included the OS-specific EAL header files,
but not the architecture-specific ones. This patch moves the selection
of target architecture to the top-level meson.build file so that the
global include can reference that.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Add log infra for node specific logging.
Also, add null rte_node that just ignores all the objects
directed to it.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Since the kernel modules are moved to kernel/ directory,
there is no need anymore for the sub-directory eal/ in
linux/, freebsd/ and windows/.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The EAL API (with doxygen documentation) is moved from
common/include/ to include/, which makes more clear that
it is the global API for all environments and architectures.
Note that the arch-specific and OS-specific include files are not
in this global include directory, but include/generic/ should
cover the doxygen documentation for them.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
While most windows apps can handle both "\" and "/" as path separators,
"more" is treating the "/" as the start of a command-line flag in this
case, causing errors.
Fixes: cba806e07d ("build: change ABI versioning to global")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
When configuring with meson we print out a list of enabled components, but
it is also useful to list out the disabled components and the reasons why.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
When a component uses either XOPEN_SOURCE or POSIX_C_SOURCE macro
explicitly in its build recipe, it restricts visibility of a non POSIX
features subset, such as IANA protocol numbers (IPPROTO_* macros).
Non standard features are enabled by default for DPDK both for Linux
thanks to _GNU_SOURCE and for FreeBSD thanks to __BSD_VISIBLE. However
using XOPEN_SOURCE or POSIX_(C_)SOURCE in a component causes
__BSD_VISIBLE to be defined to 0 for FreeBSD, causing different feature
sets visibility for Linux and FreeBSD. It restricts from using IPPROTO
macros in public headers, such as rte_ip.h, despite the fact they are
already widely used in sources.
Add __BSD_VISIBLE macro specified unconditionally for FreeBSD targets
which enforces feature sets visibility unification between Linux and
FreeBSD.
Add single -D_GNU_SOURCE to config/meson.build as a project argument
instead of adding separate directive for each project subtree.
This patch solves the problem of build breaks for [1] on FreeBSD [2]
following the discussion [3].
[1] https://mails.dpdk.org/archives/dev/2019-May/131885.html
[2] http://mails.dpdk.org/archives/test-report/2019-May/082263.html
[3] https://mails.dpdk.org/archives/dev/2019-May/132110.html
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Rather than having a separate version.map file for linux/BSD and an
exports definition file for windows for each library, generate the
latter from the former automatically at build time.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
While the examples were being installed into the appropriate install path
when processing the examples/meson.build file, that file was only processed
if the "examples" meson parameter was non-empty. Since we now do more than
just build the examples, we need to unconditionally process the file.
Fixes: 2daf565f91 ("examples: install as part of ninja install")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
If libbsd is enabled in DPDK, the strlcpy and strlcat functions in
rte_string_fns.h redirect to the varients in libbsd, only using the
fallbacks if it is not enabled. Therefore, if libbsd is enabled, it needs
to be called out as a DPDK dependency in the pkgconfig file.
To ensure that we don't have undefined variables on non-Linux platforms, we
can remove the linux condition around the libbsd check - no harm comes in
looking for it on other OS, since it's an optional dependency.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The post-install script to symlink the PMDs from their own PMD directory to
the regular lib directory (so they would be found by ld at runtime) was
using the "-r" flag to ln to create relative symlinks. This flag is
unsupported by ln on FreeBSD causing the ninja install step to fail.
Reworking the script to take the relative driver path as parameter removes
the need for ln to calculate the relative path ensuring compatibility with
FreeBSD.
As part of the fix, we move the registration of the install script to the
config/meson.build file, from the top level one. This improves readability
as the script takes as parameters the variables set in that file.
Fixes: ed4d43d73e ("build: symlink drivers to library directory")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Added rte_os.h files to support OS specific functionality.
Updated build system to contain OS headers in the include
path.
Signed-off-by: Anand Rawat <anand.rawat@intel.com>
Reviewed-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Harini Ramakrishnan <harini.ramakrishnan@microsoft.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This is to fix a build error with meson in GNU/Linux that is caused
by using the 'more' command to read the VERSION file. The error:
config/meson.build:10:10: ERROR: String
'::::::::::::::\n<RTE_SDK_PATH>VERSION\n::::::::::::::\n19' cannot be
converted to int
The command 'more' prints the file name before the actual
contents of the file when it's being run without a controlling terminal.
This could happen in CI environments.
Please refer to:
https://git.kernel.org/pub/scm/utils/util-linux/util-linux.git/tree/text-utils/more.c
Fixes: c04172b5f0 ("build: add single source of DPDK version number")
Fixes: d320fe56bd ("build: use version number from config file")
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
To keep the top-level meson.build file as clean and clear as possible, we
move the version handling to the config/meson.build file, where the rest of
the build configuration is already being set up.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add a new file VERSION to hold the current DPDK version number.
Have meson use this file for it's project version, and have make use
it for reporting out "showversion" and "showversionum".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
If for debugging we disable the driver directory in the meson.build file,
we get an error because the variable "driver_classes" does not exist.
This is because driver_classes is only defined in the
drivers/meson.build file. Defining driver_classes in dpdk/meson.build file
will make it easier for compiling separate directories.
In the process, we rename driver_classes to dpdk_driver_classes for
consistency with the other variables.
Signed-off-by: Andrius Sirvys <andrius.sirvys@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Meson 0.47.1 fixed a bug that is difficult to work around, which causes
the linker flag of dependencies to be repeated dozens of times, which
causes issues especially when using the built-in dependency() API.
Bump the minimum version and remove obsolete version checks.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we can move it back to where it all started in early
versions of DPDK - the "app/" folder.
This move has a couple of advantages:
* This reduces clutter at the top level of the project, due to one less
folder.
* It eliminates the separate build task necessary for building the
autotests using make "make test-build" which means that developers are
less likely to miss something in their own compilation tests
* It re-aligns the final location of the test binary in the app folder when
building with make with it's location in the source tree.
For meson builds, the autotest app is different from the other apps in that
it needs a series of different test cases defined for it for use by "meson
test". Therefore, it does not get built as part of the main loop in the
app folder, but gets built separately at the end.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Since compat library is only a single header, we can easily move it into
the EAL common headers instead of tracking it separately. The downside of
this is that it becomes a little more difficult to have any libs that are
built before EAL depend on it. Thankfully, this is not a major problem as
the only library which uses rte_compat.h and is built before EAL (kvargs)
already has the path to the compat.h header file explicitly called out as
an include path.
However, to ensure that we don't hit problems later with this, we can add
EAL common headers folder to the global include list in the meson build
which means that all common headers can be safely used by all libraries, no
matter what their build order.
As a side-effect, this patch also fixes an issue with building on BSD using
meson, due to compat lib no longer needing to be listed as a dependency.
Fixes: a8499f65a1 ("log: add missing experimental tag")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Tested-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Applications need to at least match DPDK's -march option to build
successfully due to some static inline functions in the public headers.
This might cause problems, especially in distributions, so add a note
in the pkg-config description.
Fixes: a25a650be5 ("build: add infrastructure for meson and ninja builds")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Dependencies of the RTE libraries were not being added to the
Requires.private field of the pc file since the variable used for
dynamic linking was passed to the related field of pkg.generate.
Use the static one so that dependencies are included.
Fixes: 57ae0ec626 ("build: add dependency on telemetry to apps with meson")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Start version numbering for a new release cycle,
and introduce a template file for release notes.
The release notes comments are updated to mandate
a scope label for API and ABI changes.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Allow users and packagers to override the default dpdk/drivers
subdirectory where the PMDs get installed under $lib.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Timothy Redaelli <tredaelli@redhat.com>
