Move the vdev bus from lib/librte_eal to drivers/bus.
As the crypto vdev helper function refers to data structure
in rte_vdev.h, so we move those helper function into drivers/bus
too.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Introduce a new iommu-support parameter to Vhost PMD that
passes the RTE_VHOST_USER_IOMMU_SUPPORT flag at vhost
device register time.
Default value is 0, meaning that IOMMU support is disabled
if not specified explicitly.
Example to enable IOMMU support for a given device:
--vdev 'net_vhost0,iface=/tmp/vhost-user2,iommu-support=1'
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Tested-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
This flag is not necessary at the ether layer anymore.
Buses are able to advertise their hotplug support. The ether layer can
rely upon this capability instead of a special flag.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change the rte_eth_dev_callback_process function to return int,
and add a void *ret_param parameter.
The new parameter is used by ixgbe and i40e instead of abusing
the user data of the callback.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch implements the ops rx_queue_count for vhost PMD by adding
a helper function rte_vhost_rx_queue_count in vhost lib.
The ops rx_queue_count gets vhost RX queue avail count and helps to
understand the queue fill level.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Move the call to stop the device inside the close routine because close
needs to stop the device if it isn't stopped.
Free the allocated queue buffers in close instead of doing so in remove.
Original code had these clean ups in remove which was causing memory
leak.
Signed-off-by: Sagar Abhang <sabhang@brocade.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This is a preparation to embed the generic rte_device into the rte_eth_dev
also for virtual devices.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Rename "rte_virtio_net.h" to "rte_vhost.h", to not let it be virtio
net specific.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We used to use rte_vhost_driver_session_start() to trigger the vhost-user
session. It takes no argument, thus it's a global trigger. And it could
be problematic.
The issue is, currently, rte_vhost_driver_register(path, flags) actually
tries to put it into the session loop (by fdset_add). However, it needs
a set of APIs to set a vhost-user driver properly:
* rte_vhost_driver_register(path, flags);
* rte_vhost_driver_set_features(path, features);
* rte_vhost_driver_callback_register(path, vhost_device_ops);
If a new vhost-user driver is registered after the trigger (think OVS-DPDK
that could add a port dynamically from cmdline), the current code will
effectively starts the session for the new driver just after the first
API rte_vhost_driver_register() is invoked, leaving later calls taking
no effect at all.
To handle the case properly, this patch introduce a new API,
rte_vhost_driver_start(path), to trigger a specific vhost-user driver.
To do that, the rte_vhost_driver_register(path, flags) is simplified
to create the socket only and let rte_vhost_driver_start(path) to
actually put it into the session loop.
Meanwhile, the rte_vhost_driver_session_start is removed: we could hide
the session thread internally (create the thread if it has not been
created). This would also simplify the application.
NOTE: the API order in prog guide is slightly adjusted for showing the
correct invoke order.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
rename "virtio_net_device_ops" to "vhost_device_ops", to not let it
be virtio-net specific.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
They are virtio-net specific and should be defined inside the virtio-net
driver.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We used to use rte_vhost_get_queue_num() for telling how many vrings.
However, the return value is the number of "queue pairs", which is
very virtio-net specific. To make it generic, we should return the
number of vrings instead, and let the driver do the proper translation.
Say, virtio-net driver could turn it to the number of queue pairs by
dividing 2.
Meanwhile, mark rte_vhost_get_queue_num as deprecated.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Assume there is an application both support vhost-user net and
vhost-user scsi, the callback should be different. Making notify
ops per vhost driver allow application define different set of
callbacks for different driver.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The rte_eth_vhost_feature_disable/enable/get APIs are just a wrapper of
rte_vhost_feature_disable/enable/get. However, the later are going to
be refactored; it's going to take an extra parameter (socket_file path),
to let it be per-device.
Instead of changing those vhost-pmd APIs to adapt to the new vhost APIs,
we could simply remove them, and let vdev to serve this purpose. After
all, vdev options is better for disabling/enabling some features.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch adds a call to rte_vhost_mtu_get() at device creation
time to fill device's MTU property when available.
This makes the MTU value defined in QEMU cmdline accessible to the
application by calling rte_eth_dev_get_mtu().
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This patch revmoves include of the numaif.h header from rte_eth_vhost.c.
Commit 586e390013 ("vhost: export numa node") moved the invocation of
get_mempolicy() from rte_eth_vhost.c to librte_vhost. So there is no need
to include the numaif.h header anymore in rte_eth_vhost.c.
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
vhost removes limit of Rx burst size(32 pkts) and supports to make
an best effort to receive pkts.
Cc: yuanhan.liu@linux.intel.com
Cc: maxime.coquelin@redhat.com
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
vhost removes limit of Tx burst size(32 pkts) and supports to make
an best effort to transmit pkts.
Cc: yuanhan.liu@linux.intel.com
Cc: maxime.coquelin@redhat.com
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add support to the vHostdriver for the new API to force free consumed
buffers on Tx ring. vHost does not cache the mbufs so there is no work
to do.
Signed-off-by: Billy McFall <bmcfall@redhat.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
The commit aed0b12930 ("net/vhost: fix socket file deleted on stop")
moves rte_vhost_driver_register and rte_vhost_driver_unregister from
dev_start() and dev_stop() into driver's probe() and remove().
Apps, like testpmd, using vhost pmd in server mode, usually calls
dev_stop() and dev_close() as quitting, instead of driver-specific
remove(). Then those unix socket files have no chance to get removed.
Semantically, device-specific things should be put into device-specific
APIs. Fix this issue by moving rte_vhost_driver_unregister, plus other
structure free into dev_close().
Fixes: aed0b12930 ("net/vhost: fix socket file deleted on stop")
Cc: stable@dpdk.org
Reported-by: Lei Yao <lei.a.yao@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Some virtual pmds report a different name than the vdev driver name
registered in eal.
While it does not hurt, let's try to be consistent.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since commit b1fb53a39d ("ethdev: remove some PCI specific handling"),
rte_eth_dev_info_get() relies on dev->data->drv_name to report the driver
name to caller.
Having the pmds set driver_info->driver_name in the pmds is useless,
since ethdev overwrites it right after.
The only thing the pmd must do is:
- for pci drivers, call rte_eth_copy_pci_info() which then sets
data->drv_name
- for vdev drivers, manually set data->drv_name
At this stage, virtio-user does not properly report a driver name (fixed in
next commit).
Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Jan Blunck <jblunck@infradead.org>
.dev_start()/.dev_stop() roughly corresponds to the local device's port
being ready. This is different from the remote client being connected
which is roughly link up or down. Emulate the device start/stop behavior
by separately tracking the start/stop state to determine if we should
allow packets to be queued to/from the remote client.
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
If you create a vhost server device, it doesn't create the actual datagram
socket until you call .dev_start(). If you call .dev_stop() is also
deletes those sockets. For QEMU clients, this is a problem since QEMU
doesn't know how to re-attach to datagram sockets that have gone away.
To fix this, register and unregister the datagram sockets during device
creation and removal.
Fixes: ee584e9710 ("vhost: add driver on top of the library")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The function rte_eth_xstats_get() return an array of tuples (id,
value). The value is the statistic counter, while the id references a
name in the array returned by rte_eth_xstats_get_name().
Today, each 'id' returned by rte_eth_xstats_get() is equal to the index
in the returned array, making this value useless. It also prevents a
driver from having different indexes for names and value, like in the
example below:
rte_eth_xstats_get_name() returns:
0: "rx0_stat"
1: "rx1_stat"
2: ...
7: "rx7_stat"
8: "tx0_stat"
9: "tx1_stat"
...
15: "tx7_stat"
rte_eth_xstats_get() returns:
0: id=0, val=<stat> ("rx0_stat")
1: id=1, val=<stat> ("rx1_stat")
2: id=8, val=<stat> ("tx0_stat")
3: id=9, val=<stat> ("tx1_stat")
This patch fixes the drivers to set the 'id' in their ethdev->xstats_get()
(except e1000 which was already doing it), and fixes ethdev by not setting
the 'id' field to the index of the table for pmd-specific stats: instead,
they should just be shifted by the max number of generic statistics.
Fixes: bd6aa172cf ("ethdev: fetch extended statistics with integer ids")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This moves the non-PCI related initialization of the link state interrupt
callback list and the setting of the default MTU to rte_eth_dev_allocate()
so that drivers only need to set non-default values.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This registers the legacy names of the driver being renamed in
commit 2f45703c17 ("drivers: make driver names consistent").
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
add cb_arg parameter to the _rte_eth_dev_callback_process function.
Adding a parameter to this function allows passing information
to the application when an eth device event occurs such as
a VF to PF message.
This allows the application to decide if a particular function
is permitted.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Alex Zelezniak <alexz@att.com>
All macros related to driver registeration renamed from DRIVER_*
to RTE_PMD_*
This includes:
DRIVER_REGISTER_PCI -> RTE_PMD_REGISTER_PCI
DRIVER_REGISTER_PCI_TABLE -> RTE_PMD_REGISTER_PCI_TABLE
DRIVER_REGISTER_VDEV -> RTE_PMD_REGISTER_VDEV
DRIVER_REGISTER_PARAM_STRING -> RTE_PMD_REGISTER_PARAM_STRING
DRIVER_EXPORT_* -> RTE_PMD_EXPORT_*
Fix PMDINFOGEN tool to look for matches of RTE_PMD_REGISTER_*.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add an option, dequeue-zero-copy, to enable this feature in vhost-pmd.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
Inline with PCI probe and remove, VDEV probe and remove hooks provide
a uniform naming.
PCI probe represents scan and driver initialization. For VDEV, it will
represent argument parsing and initialization.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This feature adds vhost pmd extended statistics from per port perspective
in order to meet the requirements of the applications such as OVS etc.
RX/TX xstats count the bytes without CRC. This is different from physical
NIC stats with CRC.
The statistics counters are based on RFC 2819 and RFC 2863 as follows:
rx/tx_good_packets
rx/tx_total_bytes
rx/tx_missed_pkts
rx/tx_broadcast_packets
rx/tx_multicast_packets
rx/tx_unicast_packets
rx/tx_undersize_errors
rx/tx_size_64_packets
rx/tx_size_65_to_127_packets;
rx/tx_size_128_to_255_packets;
rx/tx_size_256_to_511_packets;
rx/tx_size_512_to_1023_packets;
rx/tx_size_1024_to_1522_packets;
rx/tx_1523_to_max_packets;
rx/tx_errors
rx_fragmented_errors
rx_jabber_errors
rx_unknown_protos_packets;
No API is changed or added.
rte_eth_xstats_get_names() to retrieve what kinds of vhost xstats are
supported,
rte_eth_xstats_get() to retrieve vhost extended statistics,
rte_eth_xstats_reset() to reset vhost extended statistics.
The usage of vhost pmd xstats is the same as virtio pmd xstats.
for example, when test-pmd application is running in interactive mode
vhost pmd xstats will support the two following commands:
show port xstats all | port_id will show vhost xstats
clear port xstats all | port_id will reset vhost xstats
net/virtio pmd xstats(the function virtio_update_packet_stats) is used
as reference when implementing the feature.
Tested-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The patch moves all stats counters to a new defined struct vhost_stats
as follows, in order to manage all stats counters in a unified way and
simplify the subsequent function implementation(vhost_dev_xstats_reset).
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
In some cases when using the vHost PMD, certain vHost library functions
may still need to be accessed. One such example is the
rte_vhost_get_queue_num function which returns the number of virtqueues
reported by the guest - information which is not exposed by the PMD.
This commit introduces a new rte_eth_vhost function that returns the
'vid' associated with a given port id. This allows the PMD user to call
vHost library functions which require the 'vid' value.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
- All devices register themselfs by calling a kind of DRIVER_REGISTER_XXX.
The PMD_REGISTER_DRIVER is not used anymore.
- PMD_VDEV type is also not being used - can be removed from all VDEVs.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: David Marchand <david.marchand@6wind.com>
All PMD_VDEV drivers can now use rte_vdev_driver instead of the
rte_driver (which is embedded in the rte_vdev_driver).
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Now that hotplug has been moved to eal, there is no reason to keep the
device type in this layer.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
As discussed in the past release, driver names are modified
to be more consistent, and the future driver should follow
this new convention.
Driver names consist of:
"driver category"_"driver folder name"_"optional extra name".
For example:
- Crypto null driver -> "crypto_null"
- Network IXGBE VF driver -> "net_ixgbe_vf"
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fixes a bug where rte_eth_vhost_get_queue_event would not return enabled
queues after a guest application restart.
Fixes: ee584e9710 ("vhost: add driver on top of the library")
Signed-off-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Driver arguments shown with DRIVER_REGISTER_PARAM_STRING
have been separated in multiple lines and indented to
ease their readability.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Since now the PMD_REGISTER_DRIVER macro sets the driver names,
there is no need to have the rte_driver structure setting it
statically, as it will get overridden.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Modify the PMD_REGISTER_DRIVER macro, adding a name argument to it. The
addition of a name argument creates a token that can be used for subsequent
macros in the creation of unique symbol names to export additional bits of
information for use by the pmdinfogen tool. For example:
PMD_REGISTER_DRIVER(ena_driver, ena);
registers the ena_driver struct as it always did, and creates a symbol
const char this_pmd_name0[] __attribute__((used)) = "ena";
which pmdinfogen can search for and extract. The subsequent macro
DRIVER_REGISTER_PCI_TABLE(ena, ena_pci_id_map);
creates a symbol const char ena_pci_tbl_export[] __attribute__((used)) =
"ena_pci_id_map";
Which allows pmdinfogen to find the pci table of this driver
Using this pattern, we can export arbitrary bits of information.
pmdinfo uses this information to extract hardware support from an object
file and create a json string to make hardware support info discoverable
later.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Remy Horton <remy.horton@intel.com>
According to 'rte_eth_stats' structure comments, 'imissed'
should represent RX error counting, but currently 'imissed' is
used to count TX error.
The patch replaces 'imissed' by 'oerrors'.
Fixes: ee584e9710 ("vhost: add driver on top of the library")
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Some libraries were missing their dependency on eal, mbuf, mempool,
ring and kvargs.
It is revealed by the linker option "-z defs".
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
