This patch removes current support of Memory Region (MR) in order to
accommodate the dynamic memory hotplug patch. This patch can be compiled
but traffic can't flow and HW will raise faults. Subsequent patches will
add new MR support.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Change max inline header length to 192B to allow IPv6 VXLAN TSO headers
and header with options that more than 128B.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Move some code in DPDK callbacks to add/remove MAC addresses to internal
function. This modification will be necessary to handle implement the
devop set_mc_addr_list.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Aligning Mellanox SPDX copyrights to a single format.
In addition replace to SPDX licence files which were missed.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Wait to complete is present to let the application get a correct status
when it requires it, it should not be ignored.
Fixes: e313ef4c2fe8 ("net/mlx5: fix link state on device start")
Fixes: cb8faed7dde8 ("mlx5: support link status update")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reserving the memory space for the UAR near huge pages helps to
**reduce** the cases where the secondary process cannot start. Those
pages being physical pages they must be mapped at the same virtual
address as in the primary process to have a
working secondary process.
As this remap is almost the latest being done by the processes
(libraries, heaps, stacks are already loaded), similar to huge pages,
there is **no guarantee** this mechanism will always work.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Following commit c7bf62255edf ("net/mlx5: fix handling link status event")
the link state must be up in order for the burst function to be set on
the device ops.
As the link may take time to move between down and up state it is
possible the rte_eth_dev_start call will return with wrong burst
function (either null or the empty burst function).
Fixing it by forcing the link to be up before returning from device
start. In case the link is still not up after 5 seconds fail the function.
In addition initialize the burst function on device probe to prevent
crashes before the link is up.
Fixes: c7bf62255edf ("net/mlx5: fix handling link status event")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
MLX5 NIC does not support all hash fields, this patch limit by refusing
impossible RSS combination to avoid errors.
Fixes: 2f97422e7759 ("mlx5: support RSS hash update and get")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
RSS hash configuration is currently ignored by the PMD, this commits
removes the RSS feature.
This functionality will be added in a later commit.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Mellanox NICs has a limitation on the number of mbuf segments a multi
segment mbuf can have. The max number depends on the Tx offloads
requested.
The current code not enforce such limitation, which might cause
malformed work requests to be written to the device.
This commit adds verification for the number of mbuf segments posted
to the device. In case of overflow the packet will not be sent.
In addition update the nic documentation with the limitation.
Considering device limitation is 63 data segments in a work request, the
maximum number of segment in mbuf was calculated taking TSO as the worst
case:
max_nb_segs = 63 - (control_segment + ethernet segment +
TSO headers inline + inline segment +
extra inline to align to cacheline)
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
To make vectorized burst routines enabled, it is required to run on x86_64
architecture. If all the conditions are met, the vectorized burst functions
are enabled automatically. The decision is made individually on RX and TX.
There's no PMD option to make a selection.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
ConnectX-5 supports enhanced version of multi-packet send (MPS). An MPS Tx
descriptor can carry multiple packets either by including pointers of
packets or by inlining packets. Inlining packet data can be helpful to
better utilize PCIe bandwidth. In addition, Enhanced MPS supports hybrid
mode - mixing inlined packets and pointers in a descriptor. This feature is
enabled by default if supported by HW.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
The size of Rx RSS indirection table was limited by 256, but it is not
required anymore for all Mellanox NICs. However, the librte_ether still
limits the size by 512.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Replacing the variable countdown (which depends on the number of
descriptors) with a fixed relative threshold known at compile time improves
performance by reducing the TX queue structure footprint and the amount of
code to manage completions during a burst.
Completions are now requested at most once per burst after threshold is
reached.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
The latest version of Mellanox OFED exposes hardware definitions necessary
to implement data path operation bypassing Verbs. Update the minimum
version requirement to MLNX_OFED >= 3.3 and clean up compatibility checks
for previous releases.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Inline TX will be fully managed by the PMD after Verbs is bypassed in the
data path. Remove the current code until then.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
There is no scatter/gather support anymore, CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N
has no purpose and can be removed.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When the number of RX queues is not a power of two,
the RETA table is configured to its maximum size for
better balancing.
Testing showed that limiting its size to 256 improves performance
noticeably with little to no impact on balancing results.
Fixes: ebb30ec64a68 ("mlx5: increase RETA table size")
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Until now, broadcast frames were handled like unicast. Moving the related
flow to the special flows table frees up the related unicast MAC entry.
The same method is used to handle IPv6 multicast frames.
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Merge redundant code by adding a static initialization table to manage
promiscuous and allmulticast (special) flows.
New function priv_rehash_flows() implements the logic to enable/disable
relevant flows in one place from any context.
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
ConnectX-4 NICs can handle at most 512 entries in RETA table.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add interrupts handler for port status notification.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Use the maximum size of the indirection table when the number of requested
RX queues is not a power of two, this help to improve RSS balancing.
A message informs users that balancing is not optimal in such cases.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
All MAC RX flows must be updated with VLAN information when configuring a
VLAN filter.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
RSS implementation with parent/child QPs comes from mlx4 and is temporary.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
In its current state, this driver implements the bare minimum to initialize
itself and Mellanox ConnectX-4 adapters without doing anything else
(no RX/TX for instance). It is disabled by default since it is based on the
mlx4 driver and also depends on libibverbs.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Or Ami <ora@mellanox.com>
