New version of the packages with dependencies for the szedata2
driver is needed due to the new API of the libsze2 library which
is used in the driver.
The documentation and the release notes are updated to contain
the information about the required versions.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Acked-by: Jan Remes <remes@netcope.com>
A .svg extension was added instead of .* which caused
the pdf docs to not build this change fixes that.
Fixes: a5e1231f09 ("net/szedata2: do not affect Ethernet interfaces")
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
NFB cards employ multiple Ethernet ports.
Until now, Ethernet port-related operations were performed on all of them
(since the whole card was represented as a single port).
With new NFB-200G2QL card, this is no longer viable.
Since there is no fixed mapping between the queues and Ethernet ports,
and since a single card can be represented as two ports in DPDK,
there is no way of telling which (if any) physical ports should be
associated with individual ports in DPDK.
This is also described in documentation in more detail.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Signed-off-by: Jan Remes <remes@netcope.com>
NICs are available from Netcope under the names NFB-*.
Change names and direct the links to Netcope web.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Acked-by: John McNamara <john.mcnamara@intel.com>
The coremask option in DPDK is difficult to use and we should be
promoting the use of the corelist (-l) option. The patch
adjusts the docs to use -l EAL option instead of the -c option.
The patch only changes the docs and not the code as the -c option
will continue to exist unless it is removed in the future. The -c
option should be kept to maintain backward compatibility.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The link speed configuration is now done with bitmaps so 100G speed
requires only a new bit flag.
The actual link speed is a number so its size must be increased from
16-bit to 32-bit.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Tested-by: Matej Vido <vido@cesnet.cz>
Mmap PCI resource file and add inline functions for reading from and
writing to PCI resource address space.
Add description of IBUF and OBUF address space.
Add configuration option for setting which firmware type will be used.
Right address space values for IBUFs and OBUFs offsets are used
according to configuration option CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS.
Setting link up/down and getting info about link status is done through
mmapped PCI resource address space.
Signed-off-by: Matej Vido <vido@cesnet.cz>
PMD was of type PMD_VDEV which means that PCI device is not recognised
automatically during EAL initialization, but it has to be created by
EAL option --vdev.
Now, PMD is of type PMD_PDEV which means that PCI device is probed
and recognised during EAL initialization automatically.
Path to szedata2 device file is matched with device and the count
of available RX and TX DMA channels is found out during device
initialization.
Initialization, starting and stopping of queues is changed to better
correspond with Ethernet device API model. Function callbacks
(rx|tx)_queue_(start|stop) are added. Unnecessary items are removed
from ethernet device private data structure.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Add note to the documentation that only x86_64 versions of the external
libraries are currently provided.
Signed-off-by: Matej Vido <matejvido@gmail.com>
Add virtual PMD which communicates with COMBO cards through sze2
layer using libsze2 library.
Since link_speed is uint16_t, there can not be used number for 100G
speed, therefore link_speed is set to ETH_LINK_SPEED_10G until the
type of link_speed is solved.
Signed-off-by: Matej Vido <matejvido@gmail.com>
