Build app/test will be failed for function only defined but not used.
test_prefetch.c:65: error: ‘testfn_prefetch_cmd’ defined but not used
Add attribute used in test function declaration can fix this.
static void __attribute__((used)) testfn_##t(void);
Fixes: 727909c592 ("app/test: introduce dynamic commands list")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
When port id is RTE_PORT_ALL, port_id_is_invalid will also return zero.
So this function will only set ports[255] need_reconfig flag, other ports will
be skipped.
Fixes: edab33b1c0 ("app/testpmd: support port hotplug")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Fix a warning when the rte_common.h header is included in a compilation
using -Wbad-function-cast, such as in Open vSwitch where the
following warning is emitted repeatedly:
../rte_common.h: In function 'rte_is_aligned':
../rte_common.h:184:9: warning: cast from function call of
type 'uintptr_t' to non-matching type 'void *' [-Wbad-function-cast]
This change fixes the issue in rte_common.h by using the RTE_ALIGN_FLOOR
macro to get the aligned floor value with generic type casting.
Also removed the rte_align_floor_int() function and replaced it with
the RTE_PTR_ALIGN_FLOOR() macro.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
testpmd parameter "nb-port" mean the number of forwarding port.
It's incorrect to use function port_id_is_invalid to check number of ports.
Fixes: edab33b1c0 ("app/testpmd: support port hotplug")
Signed-off-by: Yong Liu <yong.liu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Ixgbe doesn't support the ipv4-frag and ipv6-frag flow types, remove them.
Ixgbe doesn't support configure flex mask on each kind of flow type, this
patch uses RTE_ETH_FLOW_UNKNOWN to specify global flex mask setting.
This patch also changes the string "raw" to "none" to indicate flex mask
setting unrelated with flow type in testpmd for ixgbe.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
When user quits testpmd, and there is traffic being forwarded,
that may produce a segmentation fault, due to ports being closed,
while they are still transmitting packets.
This patch prevents the issue from happening,
by stopping packet forwarding before closing the ports.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
There is no remaining reference to E_RTE_NO_TAILQ.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This register system makes it possible to reserve a tailq for the dpdk
libraries.
The "dynamic" tailqs are right after the "static" tailqs in shared mem.
Primary process is responsible for writing the tailq names, so that secondary
processes can find them.
This is a temp commit, "static" tailqs are removed after conversion of all
users in next commits.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The "reserve" macros and functions do not check if the requested entry is free.
They do nothing more than the lookup function (which itself "creates" entries
...).
The rte_tailq api is marked as "internal use" in documentation and these macros
are only used in test application, so just get rid of them.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
test_hash.c: In function ‘test_crc32_hash_alg_equiv’:
error: format ‘%lu’ expects argument of type ‘long unsigned int’,
but argument 2 has type ‘size_t’ [-Werror=format]
According to C99, for size_t type should use format "%zu"
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch enables testpmd user can config port hw_vlan with more fine granularity:
hw vlan filter, hw vlan strip, and hw vlan extend.
Don't remove the original command(hw-vlan) considering that some user still want to use
only one command to switch on/off all 3 options.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch modifies testpmd behavior when setting:
rx_vlan add all vf_port (enabling all vlanids
to be passed thru rx filter on VF).
Rx_vlan_all_filter_set() function,
checks if the next vlanid can be enabled by the driver.
Number of vlanids is limited by the NIC and thus the NIC
do not allow to enable more vlanids than it can allocate
in VFTA table.
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When invoking creation of bonded device using:
create bonded device mode socket in testpmd the bonded port was not
enabled at the end of cmd_create_bonded_device_parsed function.
This caused commands 'show port info' and 'show port stats' not working
properly with bonding device. This patch fixed it.
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Currently, if try to start/stop/close one invalid port,
no error shows in testpmd.
This is a bug, need check the port number.
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
As hotplug has been enabled, start the testpmd with no nic binded
will show one error log "Please stop the ports first":
Interactive-mode selected
Please stop the ports first
Done
testpmd>
This issue is cause by the logic of check link status.
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The malloc family returns void * and therefore cast is unnecessary.
Use calloc rather than zmalloc with multiply for array.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
If testpmd is invoked with portmask option like below, segmentation
fault will occur. This patch fixes the issue.
Reported-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The patch introduces following commands.
- port attach [ident]
- port detach [port_id]
- attach: attaching a port
- detach: detaching a port
- ident: pci address of physical device.
Or device name and parameters of virtual device.
(ex. 0000:02:00.0, eth_pcap0,iface=eth0)
- port_id: port identifier
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This new parameter is needed to keep device type like PCI or virtual.
Port detaching processes are different between PCI device and virtual
device.
RTE_ETH_DEV_PCI indicates device type is PCI. RTE_ETH_DEV_VIRTUAL
indicates device is virtual.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
New function test_crc32_hash_alg_equiv() checks whether software,
4-byte operand and 8-byte operand versions of CRC32 hash function
implementations return the same result value.
Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Main code changes:
1. Added more typical data points for a thorough performance test
2. Added unaligned test cases since it's common in DPDK usage
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Removed unnecessary test cases for base move functions
since the function "func_test" covers them all.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
VTA is for debugging only, it increases compile time and binary size,
especially when there're a lot of inlines.
So disable it since memcpy test contains a lot of inline calls.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
- API rte_timer_reset() should return -1 when the timer is in the
RUNNING or CONFIG state. Instead, it ignores the return value of
internal function __rte_timer_reset() and always returns 0.
We change rte_timer_reset() to return the value returned by
__rte_timer_reset().
- Enhance timer stress test 2 to report how many timer reset
collisions occur, i.e., how many times rte_timer_reset() fails
due to a timer being in the CONFIG state.
Signed-off-by: Robert Sanford <rsanford2@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In test_sched, we are missing NULL pointer checks after create_mempool()
and rte_pktmbuf_alloc(). Add in these checks using TEST_ASSERT_NOT_NULL macros.
VERIFY macro was removed and replaced by standard test ASSERTS from "test.h" header.
This provides additional information to track when the failure occurred.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Following commit c07691ae10, an implicit change has been done in the
devargs API.
This triggers problem in virtual pmds that did not check for parameters
validity as it was implicitely valid.
Fix this by restoring the empty argument as "" and add a note in the api.
Restore associated tests.
Fixes: c07691ae10 ("devargs: remove limit on parameters length")
Reported-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Tested-by: Tetsuya Mukawa <mukawa@igel.co.jp>
The 'callbacks' member of the rte_eth_dev structure has been renamed
to 'link_intr_cbs' to make it clear that it refers to callbacks from
NIC interrupts. This allows us to add other types of callbacks to
the structure without ambiguity.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch removes all references to RTE_MBUF_REFCNT, setting the refcnt
field in the mbuf struct permanently.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Since rte_hash_crc() can now be run regardless of SSE4.2 support,
we can safely remove compile checks for RTE_MACHINE_CPUFLAG_SSE4_2
in test utilities.
Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Enhance csum fwd engine based on current TX checksum framework in order
to test TX Checksum offload for NVGRE packet.
It includes:
- IPv4 and IPv6 packet
- outer L3, inner L3 and L4 checksum offload for Tx side.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Extend the "tunnel_filter" command in testpmd to test the RX tunnel filter API for NVGRE packet.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
RSS offloads supported 'ip' and 'udp' only, which did not demonstrate
all of the hardware capabilities. The modifications adds support of
new RSS offloads of 'tcp', 'sctp', 'ether' and 'all'.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
RSS offload types were defined separately for 1/10G and 40G NICs,
and have no relationship with flow types. The modifications are to
unify all RSS offload types for all PMDs. Unified RSS offload types
have new and common names which can be used for any PMD or
applications, and decouple from specific hardwares.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: merge with fm10k]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Flow types was defined actually for i40e hardware specifically,
and wasn't able to be used for defining RSS offload types of all
PMDs. It removed the enum flow types, and uses macros instead
with new names. The new macros can be used for defining RSS
offload types later. Also modifications are made in i40e and
testpmd accordingly.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: merge with new flow director API]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Following commands of syn filter are removed:
- add_syn_filter (port_id) priority (high|low) queue (queue_id)
- remove_syn_filter (port_id)
- get_syn_filter (port_id)
New command is added for syn filter by using filter_ctrl API and new
syn filter structure:
- syn_filter (port_id) (add|del) priority (high|low) queue (queue_id)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Following commands of flex filter are removed:
- add_flex_filter (port_id) len (len_value) bytes (bytes_string) mask (mask_value)
priority (prio_value) queue (queue_id)
- remove_flex_filter (port_id) index (idx)
- get_flex_filter (port_id) index (idx)
New command is added for flex filter by using filter_ctrl API and new flex filter structure:
- flex_filter (port_id) (add|del) len (len_value) bytes (bytes_value) mask (mask_value)
priority (prio_value) queue (queue_id)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch sets the default value of flow director's mask.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch removes the flexbytes_offset from rte_fdir_conf, because
the flexible payload setting is done by flex_conf instead of flexbytes_offset.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Added 4 unit tests checking link bonding mode 6 behavior.
Also modified virtual_pmd so it is possible to provide packets,
that should be received with rx_burst and to inspect packets
transmitted by tx_burst.
In packet_burst_generator.c function creating eth_header is
modified, so it accepts ether_type as a parameter and function
creating arp_header is added. Updated other unit tests to get
rid of compilation errors.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch modify mode older name from
BONDING_MODE_ADAPTIVE_TRANSMIT_LOAD_BALANCING to BONDING_MODE_TLB
This patch also changes order of TEST_ASSERT macro in
test_tlb_verify_slave_link_status_change_failover.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Changed MAC address type from uint8_t[6] to struct ether_addr and IP
address type from uint8_t[4] to uint32_t to make it consistent with
other DPDK code using MAC and IP addresses. It allows us to use
is_same_ether_addr and ether_addr_copy functions on MAC addresses in ARP header. Also
removed union from arp_hdr struct to make calls to arp_data items
shorter. Updated test-pmd to match new arp_hdr version.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
[Thomas: doxygenize comments]
rx_fc_en and tx_fc_en in cmd_link_flow_ctrl_set_parsed
could be used without being initialized.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch links test application against librte_pmd_ring.so for shared
libraries. It's required as long as librte_pmd_ring provides some additional
routines used for testing purposes and must be "hard-linked".
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
