This will install the binary sdk (bin + modules + libs + headers + mk)
in the specified directory.
This directory can be used as RTE_SDK by external applications.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This allows the user to prepare a configuration with make config
before using make install.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This variable $(O) can be used to specify a build directory
when doing an "install" procedure. The default is ".", which
means that targets will be built in the source dpdk.
This option is useful to compile outside of the source tree that may be
read-only.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The goal of this rule is to show which rules/options are available from a
"make" command.
Let's start by printing short doc about SDK building.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Allow to list configs in config/ directory with a simple make rule.
The rule showconfigs is reused in config error.
In the same time, "echo -n" is replaced by the more portable "printf".
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
This is a cheat sheet to build DPDK and can be used for a "make help".
It is explicitly described as a build help in order to concatenate it
with other helps such as test commands.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The parameter PROJECT_NUMBER is used in the HTML header
via the template variable $projectnumber.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
The version string is extracted from rte_version.h.
RTE_VER_* macros are concatenated and separators " . . r " are inserted.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
- rte_panic must be before rte_panic_ to be associated to its doc
- marker /**< must be used when commenting after the declaration only
- fix rte_string_fns.h title
- typos
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Ignore __attribute__ because it was wrongly parsed as an identifier.
This configuration is described in
http://www.stack.nl/~dimitri/doxygen/manual/preprocessing.html
Reported-by: Cyril Cressent <cyril.cressent@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Some functions are available only if RTE_MBUF_SCATTER_GATHER is enabled.
So it must be configured for doxygen parser.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
- add index page
- add doxygen configuration for API
- add doxygen CSS customization applied by a script
- HTML generation via make rules
The configuration is splitted in a static file and a make rule in order to
dynamically configure output format and path.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
It seems that doc/ has been removed so these rules are useless.
This clean-up is preliminary to generate some doc.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
rte.sdkroot.mk is mainly calling other makefiles.
These redirecting rules can be factorized by called makefile.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The option RTE_LIBRTE_KNI_DEBUG has no effect so it should be removed.
The right options are:
- RTE_KNI_KO_DEBUG
- RTE_KNI_VHOST_DEBUG_RX
- RTE_KNI_VHOST_DEBUG_TX
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This is not supported, disable to avoid compilation error like:
lib/librte_eal/linuxapp/kni/kni_misc.c:304:2: error:
format '%llx' expects argument of type 'long long unsigned int',
but argument 2 has type 'phys_addr_t' [-Werror=format]
Signed-off-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This provides a sample application and library showing how to use the
Intel(R) DPDK with basic netmap applications.
The Netmap compatibility library provides a minimal set of APIs to give the ability to
programs written against the Netmap APIs to be run with minimal changes to their
source code, using the Intel® DPDK to perform the actual packet I/O.
Since Netmap applications use regular system calls, like open(), ioctl() and
mmap() to communicate with the Netmap kernel module performing the packet I/O,
the compat_netmap library provides a set of similar APIs to use in place of those
system calls, effectively turning a Netmap application into a Intel(R) DPDK one.
The provided library is currently minimal and doesn’t support all the features that
Netmap supports, but is enough to run simple applications, such as the
bridge example included.
The application requires a single command line option:
-i INTERFACE is the number of a valid Intel(R) DPDK port to use.
If a single -i parameter is given, the interface will send back all the traffic it
receives. If two -i parameters are given, the two interfaces form a bridge, where
traffic received on one interface is replicated and sent by the other interface.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This provides a new sample application which demonstrates how
the ivshmem library and EAL capabilities can be used to create
a zero-copy fast-path for packet communication between host
machine and guest vm.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The vhost sample application demonstrates integration of the Intel(R) Data Plane
Development Kit (Intel(R) DPDK) with the Linux KVM hypervisor by implementing the
vhost-net offload API. The sample application performs simple packet switching
between virtual machines based on Media Access Control (MAC) address or Virtual
Local Area Network (VLAN) tag. The splitting of ethernet traffic from an external switch
is performed in hardware by the Virtual Machine Device Queues (VMDQ) and Data
Center Bridging (DCB) features of the Intel(R) 82599 10 Gigabit Ethernet Controller.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Updates including support for Intel® Communications Chipset
8925 to 8955 Series.
Add support for the wireless KASUMI algorithm.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
A series of minor changes to example applications included in the
Intel DPDK 1.6 release.
* changes to NIC configuration flags, e.g. specifying RSS
* replacing local "DIM" macro with common "RTE_DIM" macro
* minor whitespace changes for alignment.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Hardware does not support RSS in SRIOV setups.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
The mq_mode was not set when rxq is > 0; it's defaulted to ETH_MQ_RX_NONE.
As a result, RSS remains inactive. The fix is to set mq_mode to ETH_MQ_RX_RSS
when hf is non-zero.
This bug was introduced by commit 243db2ddee
igb/ixgbe: ETH_MQ_RX_NONE should disable RSS
Signed-off-by: Daniel Kan <dan@nyansa.com>
Acked-by: Maxime Leroy <maxime.leroy@6wind.com>
This adds a new forwarding mode to testpmd, whereby it will forward
packets, but on a transmit failure, it will wait a small amount of time
before retrying the transmit again. This mode can be useful in some
cases to set a zero-packet loss rate at the cost of overall throughput,
especially in cases where TX ring size/buffering is constrained, such as
with virtio.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
* Change behaviour to spread the memory specified across all sockets
rather than duplicating the memory for each one. This way the memory
size specified is the total memory needed by the test.
* Minor reordering of test cases, to ensure that ring autotest is the
final test run.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
It's no longer possible to run all autotests in
a single go and have them pass, so remove that option.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Minor chanes including replacing local DIM macro with more standard
RTE_DIM macro from rte_common.h.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
don't compile the timer autotests unless timer library is turned on in
the compile-time configuration.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Minor fixes/updates to the autotest app, including:
* replace hard-coded values with #defines in rte_power.h
* replace local DIM() macro with common RTE_DIM
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The following changes are included in this patch for ixgbe:
* Support for a separate Vector Poll-Mode Driver component
* Refactoring to extract out definitions from .c file to separate .h
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This is a fix for the ixgbe hardware offload flags not being set
when bulk alloc RX is used. The issue was caused by masking off
the bits that store the hardware offload values in the status_error
field to retrieve the done bit for the descriptor.
Commit 7431041062 in DPDK-1.3.0
introduced bulk dequeue, which included the bug.
Signed-off-by: Bryan Benson <bmbenson@amazon.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Physical Function assignes Tx/Rx queues to each Virtual Function
according to different schemes[1]. By querying through mailbox,
VF is able to get number of Tx/Rx queues assigned to it.
Note that current Intel ixgbe driver ixgbe-3.18.7 does not fully
support mailbox message IXGBE_VF_GET_QUEUES. The service routine
for IXGBE_VF_GET_QUEUES must be fixed, otherwise PF always return
1 as Tx/Rx queue number.
[1] See section 7.2.1.2.1, 7.1.2.2 and 7.10.2.7.2 of Intel 82599 10
Gbe Controller Datasheet.
Signed-off-by: Qinglai Xiao <jigsaw@gmail.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Following introduction of loopback mode, this mode should be explicitely
disabled in ixgbe_dev_rx_init() if not enabled.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
82599 has two loopback operation modes, Tx->Rx and Rx->Tx.
For the time being only Tx->Rx is supported.
The new field lpbk_mode added in struct rte_eth_conf defines loopback
operation mode for certain ethernet controller. By default the value
of lpbk_mode is 0, meaning loopback mode disabled.
Since each ethernet controller has its own definition of loopback modes,
API user has to check both datasheet and implementation of certain driver
so as to understand what are valid values to be set, and what are the
expected behaviors.
Check IXGBE_LPBK_82599_XXX which are defined in ixgbe_ethdev.h
for valid values of 82599 loopback mode.
Signed-off-by: Qinglai Xiao <jigsaw@gmail.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Venky Venkatesan <venky.venkatesan@intel.com>
The 82576 has known issues which require the write threshold to be set to 1.
See:
http://download.intel.com/design/network/specupdt/82576_SPECUPDATE.pdf
If not then single packets will hang in transmit ring until more arrive.
Simple tests like ping will fail.
The workaround was in the wrong file (commit a30ebfbb8c).
Move it in igb one to restore original patch (7e9e49feea).
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It should be possible to enable RSS with one Rx queue.
RSS hash can be useful independently of the number of Rx queues.
Applications can use RSS hash to identify different IP flows.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
As explained in rte_ethdev.h, ETH_MQ_RX_NONE allows to not choose RSS, DCB
or VMDQ mode.
But the igb/ixgbe code always silently select the RSS mode with ETH_MQ_RX_NONE.
This patch fixes this incoherence between the API and the implementation.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Poll Mode Driver for Paravirtual VMXNET3 NIC.
As a PMD, the VMXNET3 driver provides the packet reception and transmission
callbacks, vmxnet3_recv_pkts and vmxnet3_xmit_pkts. It does not support
scattered packet reception as part of vmxnet3_recv_pkts and
vmxnet3_xmit_pkts. Also, it does not support scattered packet reception as part of
the device operations supported.
The VMXNET3 PMD handles all the packet buffer memory allocation and resides in
guest address space and it is solely responsible to free that memory when not needed.
The packet buffers and features to be supported are made available to hypervisor via
VMXNET3 PCI configuration space BARs. During RX/TX, the packet buffers are
exchanged by their GPAs, and the hypervisor loads the buffers with packets in the RX
case and sends packets to vSwitch in the TX case.
The VMXNET3 PMD is compiled with vmxnet3 device headers. The interface is similar
to that of the other PMDs available in the Intel(R) DPDK API. The driver pre-allocates the
packet buffers and loads the command ring descriptors in advance. The hypervisor fills
those packet buffers on packet arrival and write completion ring descriptors, which are
eventually pulled by the PMD. After reception, the Intel(R) DPDK application frees the
descriptors and loads new packet buffers for the coming packets. The interrupts are
disabled and there is no notification required. This keeps performance up on the RX
side, even though the device provides a notification feature.
In the transmit routine, the Intel(R) DPDK application fills packet buffer pointers in the
descriptors of the command ring and notifies the hypervisor. In response the hypervisor
takes packets and passes them to the vSwitch. It writes into the completion descriptors
ring. The rings are read by the PMD in the next transmit routine call and the buffers
and descriptors are freed from memory.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Update the KNI kernel driver so it can compile on more modern kernels
Also, rebaseline the ethtool support off updated igb kernel drivers
so that we get the latest bug fixes and device support.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
kni_net fixed to prevent losing packet bytes when doing loopback.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reported-by: Daniel Kaminsky <daniel.kaminsky@infinitelocality.com>
