librte_pmd_pcap driver was opening the pcap/interfaces only at init time and
closing them only when the port was being stopped. This behaviour would cause
problems (leading to segfault) if the user closed the port 2 times. The first
time the pcap/interfaces would be normally closed but libpcap would throw an
error causing a segfault if the closed pcaps/interfaces were closed again.
This behaviour is solved by re-openning pcaps/interfaces when the port is
started (only if these weren't open already for example at init time).
Signed-off-by: Nicolás Pernas Maradei <nico@emutex.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The port parameter in mbuf should be set with an input port id
because DPDK apps may use it to know where each packet came from.
Signed-off-by: Saori Usami <susami@igel.co.jp>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The mbuf structure already contains a pointer to the beginning of the
buffer (m->buf_addr). It is not needed to use 8 bytes again to store
another pointer to the beginning of the data.
Using a 16 bits unsigned integer is enough as we know that a mbuf is
never longer than 64KB. We gain 6 bytes in the structure thanks to
this modification.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
* Updated to apply to latest on mainline.
* Disabled vector PMD in config as it relies heavily on the mbuf layout
This will be re-enabled in a subsequent commit once vPMD has been
reworked to take account of mbuf changes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The rte_pktmbuf structure was initially included in the rte_mbuf
structure. This was needed when there was 2 types of mbuf (ctrl and
packet). As the control mbuf has been removed, we can merge the
rte_pktmbuf into the rte_mbuf structure.
Advantages of doing this:
- the access to mbuf fields is easier (ex: m->data instead of m->pkt.data)
- make the structure more consistent: for instance, there was no reason
to have the ol_flags field in rte_mbuf
- it will allow a deeper reorganization of the rte_mbuf structure in the
next commits, allowing to gain several bytes in it
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
[Bruce: updated for latest code and new example apps]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Normally, bufs[i] stores the mbuf pointer, the index of buf[i]
is the loop count i, but if header.len > buf_size, DPDK will
free the mbuf, but the loop count i still increases, so some
of the items in bufs[] might be NULL pointer, causing a potential
DPDK core. Using num_rx as the index for bufs[] solves the problem.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Jiajia SunX <sunx.jiajia@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The commit 83b4113693 (add unique name to devices) didn't compile if
CONFIG_RTE_LIBRTE_PMD_PCAP is enabled.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Adding support to rte_eth_dev_data structure to support unique
name identifier for ethdevs to support adding slave ethdevs
(specifically virtual devices which have no public unique
identifier) to a link bonding device. This changes the API
rte_eth_dev_allocate() to require a const char *name when
allocating a ethdev, which also verifies that the name is
unique and hasn’t been already used by an existed allocated
rte_eth_dev. Also contains updates to virtual pmd’s to now call
the API with a name parameter.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
If pcap_sendpacket() fails, then eth_pcap_tx shouldn't silently free that
mbuf and continue.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Currently, physical device pmds use a separate initalization path
(rte_pmd_init_all) while virtual devices use a constructor registration and
rte_eal_dev_init. Theres no reason to have them be separate. This patch
removes the vdev specific nomenclature from the vdev init path and makes it more
generic for use with all pmds. This is the first step in converting the
physical device pmds to using the same constructor based registration path that
the virtual devices use.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the pcap driver to use the PMD_REGISTER_DRIVER macro and fix up the
Makefile so that its linkage is only done if we are building static libraries.
This means that the test applications now have no reference to the pcap library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Instead of having a list of virtual device drivers in EAL code, add an
API to register drivers. Thanks to this new registration method, we can
remove the references to pmd_ring, pmd_pcap and pmd_xenvirt in EAL code.
This also enables the ability to register a virtual device driver as
a shared library.
The registration is done in an init function flaged with
__attribute__((constructor)). The new convention is to name this
function rte_pmd_xyz_init(). The per-device init function is renamed
rte_pmd_xyz_devinit().
By the way the internal PMDs are now also .so/standalone ready. Let's do
it later on. It will be required to ease maintenance.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This reverts commits
a0cdfcf9 (use pcap-config to guess compilation flags),
ef5b2363 (fix build with empty LIBPCAP_CFLAGS) and
60191b89 (fix build when pcap_sendpacket is unavailable).
These patches are creating more problems than solving the initial one
(which was a build error with too old pcap libraries).
Since old pcap libraries are not that common, just revert them.
Reported-by: Meir Tseitlin <mirots@gmail.com>
Reported-by: Mats Liljegren <mats.liljegren@enea.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Due to a merge conflict between commits 4c745617a1 and 9d5752d80,
rte_eth_pcap.c was not compiling with the following error:
rte_eth_pcap.c: In function 'rte_pmd_init_internals':
rte_eth_pcap.c:559:30: error: dereferencing pointer to incomplete type
rte_eth_pcap.c:560:15: error: dereferencing pointer to incomplete type
rte_eth_pcap.c:561:18: error: dereferencing pointer to incomplete type
rte_eth_pcap.c:603:47: error: dereferencing pointer to incomplete type
rte_eth_pcap.c: In function 'rte_pmd_pcap_init':
rte_eth_pcap.c:732:73: error: 'dict' undeclared (first use in this
function)
rte_eth_pcap.c:732:73: note: each undeclared identifier is reported
only once for each function it appears in
This commit replaces "struct args_dict" by "struct rte_kvargs" to fix
the compilation issue.
By the way, it also removes the declaration of these functions from
the header file as no other file in DPDK references one of them. It
avoids to include <rte_kvargs.h> in rte_eth_pcap.h.
Reported-by: Meir Tseitlin <mirots@gmail.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Use command line parameters to get the name of the interface.
This name is converted into if_index, which is provided as
device info.
Signed-off-by: Mats Liljegren <mats.liljegren@enea.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Before libpcap 1.0.0, pcap_sendpacket was not available on linux targets (unless
backported).
When using such a library, we won't be able to send packet on the wire, yet we
can still dump packets into a pcap file.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
For backwards compatibility, pcap.h includes pcap/pcap.h.
Hence, to be compatible with older pcap libraries, we must include pcap.h.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This argument can be useful when rte_kvargs_process() is called with
key=NULL, in this case the handler is invoked for all entries of the
kvlist.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The "value" argument is read-only and should be const.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Before the patch, a call to rte_kvargs_tokenize() resulted in a call to
strdup() to allocate a modifiable copy of the argument string. This
string was never freed, excepted in the error cases of
rte_kvargs_tokenize() where rte_free() was wrongly called instead of
free(). In other cases, freeing this string was impossible as the
pointer not saved.
This patch introduces rte_kvargs_free() in order to free the structure
properly. The pointer to the duplicated string is now kept in the
rte_kvargs structure. A call to rte_kvargs_parse() directly allocates
the structure, making rte_kvargs_init() useless.
The only drawback of this API change is that a key/value associations
cannot be added to an existing kvlist. But it's not used today, and
there is not obvious use case for that.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Now that rte_kvargs is a generic library, there is no need to have an argument
for the driver name in rte_kvargs_tokenize() and rte_kvargs_parse()
prototypes. This argument was only used to log the driver name in case of
error. Instead, we can add a log in init function of pmd_pcap and pmd_ring.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The rte_kvargs library is a reworked copy of rte_eth_pcap_arg_parser,
so it provides the same service. Therefore we can use it and remove the
code of rte_eth_pcap_arg_parser.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Core support for using the Intel DPDK with Xen Dom0 - including EAL
changes and mempool changes. These changes encompass how memory mapping
is done, including support for initializing a memory pool inside an
already-allocated block of memory.
KNI sample app updated to use KNI close function when used with Xen.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Changes to allow compilation and use on FreeBSD. Includes:
* contigmem and nic_uio driver for FreeBSD
* new EAL instance
* new "bsdapp" compilation target
* various compilation fixes due to differences between linux and freebsd
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
A static list of 64 mbufs was being reused in Rx function.
This caused two errors:
1) If more than 64 buffers were requested in a single burst,
only the last 64 buffers are returned, the others are lost.
2) Application will free the mbuf being returned, but the receive
function will reuse the buffer anyway. If some other allocation
is done, there is suddenly multiple writers for the same mbuf.
It is fixed by allocating mbuf on demand.
In the same time, some length errors are fixed.
Reported-by: Mats Liljegren <mats.liljegren@enea.com>
Reported-by: Robert Sanford <rsanford@prolexic.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
