If HIGIG mode is enabled on configure, This needs to be disabled
on port stop. Adding support to send mbox message on port stop
to configure the port to default.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Extend RSS offload types for octeontx2. Add support to select
L3 SRC, L3 DST, L4 SRC and L4 DST for RSS calculation.
Add support to select L3 SRC or DST only, L4 SRC or DST only for RSS
calculation.
With this requirement there will be following combinations,
IPV[4,6]_SRC_ONLY, IPV[4,6]_DST_ONLY, [TCP,UDP,SCTP]_SRC_ONLY,
[TCP,UDP,SCTP]_DST_ONLY. So, instead of creating a bit for each
combination, we are using upper 4 bits (31:28) in the flow_key_cfg
to represent the SRC, DST selection. 31 => L3_SRC, 30 => L3_DST,
29 => L4_SRC, 28 => L4_DST. These won't be part of flow_cfg, so that
we don't need to change the existing ABI.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
PMD handles fast path completions in the Rx handler and control path
completions in the interrupt handler. They both are processing
completions from the same fastpath completion queue. There is a
potential for race condition when these two paths are processing
the completions from the same queue and trying to updating Rx Producer.
Add a fastpath Rx lock between these two paths to close this race.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
The fastpath task queue handler resets the fastpath scan flag
unconditionally, this patch changes that to reset the flag
only if it was set.
Fixes: 08a6e472c3 ("net/bnx2x: fix packet drop")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Flow with meter will split to three subflows, the prefix subflow with
meter action do the color, the meter subflow filter the packets, the
suffix subflow do all the left actions for packets pass the filter.
Both the color and the subflow match between prefix and suffix use the
register to store the tag.
For some of the NICs with meter color register share capability, it
only uses 8 LSB of the register for color, the left 24 MSB can be used
for flow id match between meter prefix subflow and suffix subflow.
Currently, one entire register is allocated for flow matching which
causes the NICs with limited registers don't have enough register for
other matching.
Add the meter color share capability checking to fix lacking of
registers issue.
Fixes: 9ea9b049a9 ("net/mlx5: split meter flow")
Cc: stable@dpdk.org
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The id allocated is for the register unique id match. Some registers may
not use the full 32 bits. Add the maximum id to avoid allocate id over
the register restriction.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The ConnectX-5 HW cannot calculate the checksum for ICMPv6,
therefore flows with pattern 'ipv6 proto is 58' with actions that change
the header should be rejected. the actions that change the header
in this type of flow are 'set_ipv6_src' and 'set_ipv6_dst'.
Fixes: 4bb14c83df ("net/mlx5: support modify header using Direct Verbs")
Cc: stable@dpdk.org
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Previous patch fixed the setting of port-id for eswitch rules, which
are ingress only.
This patch expands the fix, to support NIC rules as well, which can
be ingress or egress.
Fixes: ce777b147b ("net/mlx5: fix E-Switch flow without port item")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The cited commit zeroed the UDP checksum for raw-encap case.
Add the same handling for vxlan-encap case.
Fixes: bf1d7d9a03 ("net/mlx5: zero out UDP checksum in encapsulation")
Cc: stable@dpdk.org
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Compilation massage example:
"dpdk/drivers/net/mlx5/mlx5_flow_dv.c:1087:10: error: comparison of
unsigned enum expression < 0 is always false
[-Werror,-Wtautological-compare]
if (reg < 0)
~~~ ^ ~
"
enum modify_reg holds only non-negative integers and in some places in
the code it was used to be compared with negative value, hence
compilation was failed.
Change all thus places to use integer instead of enum modify_reg.
Fixes: 3e8edd0ef8 ("net/mlx5: update metadata register ID query")
Fixes: 55deee1715 ("net/mlx5: extend flow mark support")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Description of several functions is not accurate.
This patch updates the description, parameter names etc.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Validation function of 'set VLAN VID' action checks twice for existing
same action in flow rule.
This patch updates the validation function logic, to check the same
restrictions more efficiently.
Fixes: 5f163d520c ("net/mlx5: support modify VLAN ID on existing VLAN header")
Fixes: b8c0372bc5 ("net/mlx5: fix set VLAN ID/PCP in new header")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Validation function of 'POP VLAN' action includes check for other
'POP VLAN' actions present in flow.
It doesn't check for 'PUSH VLAN' actions present in flow.
This patch adds check for 'PUSH VLAN' actions present in flow.
Fixes: b41e47da25 ("net/mlx5: support pop flow action on VLAN header")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Add missing check in validation function of 'pop VLAN' action.
Action is not allowed for egress flow rules.
Fixes: b41e47da25 ("net/mlx5: support pop flow action on VLAN header")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Add missing check in validation function of 'push VLAN' action.
Action is not allowed for ingress flow rules.
Fixes: 9aee7a8418 ("net/mlx5: support push flow action on VLAN header")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
According to PRM: "Drop action is mutually-exclusive with any other
action, except for Count action".
In current code this limitation is checked separately in validation
function of each action.
This patch removes the discrete checks, and adds a single check common
for all actions.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Currently the push VLAN action requires a VID value, either from
existing VLAN item, or from following 'set VLAN vid' action.
This patch removes this limitation, allowing a push VLAN action with
vid value 0.
Fixes: b8c0372bc5 ("net/mlx5: fix set VLAN ID/PCP in new header")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Validation function of 'push VLAN' action uses (POP_VLAN or PUSH_VLAN)
actions flags, instead of using a mask of both flags.
This patch replaces it to use existing VLAN_ACTIONS mask.
Fixes: 9aee7a8418 ("net/mlx5: support push flow action on VLAN header")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Flow validation function includes, after all items and actions are
validated discretely, a check for VLAN and VXLAN actions.
This check is incorrect and redundant.
This patch removes the invalid check from validation function.
Check is incorrect, action_flags bit map is checked against
items mask MLX5_FLOW_LAYER_TUNNEL.
Check is also redundant, because VLAN push/pop actions can be used
together with packet reformat actions.
Fixes: b41e47da25 ("net/mlx5: support pop flow action on VLAN header")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
PUSH_VLAN and POP_VLAN actions flags were added to ENCAP_ACTIONS
and DECAP_ACTIONS bit masks, respectively.
This is incorrect, because VLAN actions are considered as 'modify
header' actions, not as 'packet reformat' actions.
This patch removes the PUSH_VLAN and POP_VLAN actions flags from
ENCAP_ACTIONS and DECAP_ACTIONS bit masks.
Fixes: 9aee7a8418 ("net/mlx5: support push flow action on VLAN header")
Fixes: b41e47da25 ("net/mlx5: support pop flow action on VLAN header")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch adds the capability of matching the outer IPv4
headers for GTPU flows.
Fixes: efc16c6214 ("net/ice: support flow director GTPU tunnel")
Cc: stable@dpdk.org
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Based on current FDIR implementation for GTP-U, inner specification is
not supported, issue a rule for eth/ipv4/gtpu/ipv4 will also match
eth/ipv4/gtpu/ipv6, the patch adds new pattern list to align with
existed implementation.
Fixes: efc16c6214 ("net/ice: support flow director GTPU tunnel")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
The return check of function tap_lsc_intr_handle_set() is wrong, it should
be 0 or a positive number if success. So the intr_handle->intr_vec was not
been freed when tap_lsc_intr_handle_set() returned a positive number.
Fixes: 4870a8cdd9 ("net/tap: support Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Use the RTE_MIN and RTE_MAX macros instead of private macros.
Fixes: aae7dd40cd ("net/enic: move min/max macros")
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
When using pktgen lots of unnecessary errors are printed
because pktgen queries statistics before device is started.
Fixes: 3e92fd4e4e ("net/bnxt: use dynamic log type")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When the VLAN is stripped from the packet on receive the
driver must set the PKT_RX_VLAN_STRIPPED flag in the mbuf.
This is done correctly for normal receive in the bnxt driver
but was not being handled correctly in the new SSE code.
Fixes: bc4a000f2f ("net/bnxt: implement SSE vector mode")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. Fix ice FDIR and hash flow memory leak.
2. Fix the ice definition of LIST_FOR_EACH_ENTRY_SAFE not
save tmp which cause list deletion incompletely.
Fixes: 5f0978e962 ("net/ice/base: add OS specific implementation")
Fixes: f5cafa961f ("net/ice: add flow director create and destroy")
Fixes: 5ad3db8d4b ("net/ice: enable advanced RSS")
Cc: stable@dpdk.org
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Reviewed-by: Simei Su <simei.su@intel.com>
Reviewed-by: Yahui Cao <yahui.cao@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Since VF has no need of firmware, we can skip further adminq init which
involves firmware operation, this patch fixes the testpmd segfault issue
when starting with i40e VF.
Fixes: d5e1a14936 ("net/i40e/base: check MAC type")
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
If there's no mark action when creating a FDIR rule,
there shouldn't be FDIR flags in mbuf.
Fixes: f5cafa961f ("net/ice: add flow director create and destroy")
Fixes: bd984f155f ("net/ice/base: support FDIR")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Max Tx rings count could be lesser than max Rx rings in some
cases, so take this into account as well.
Account for stat contexts available(one for each ring) along with
no: of completion rings(one for each ring) to cap the max no: of
Tx /Rx rings that can be possibly created.
Fixes: f03e66cb64 ("net/bnxt: limit queue count for NS3/Stingray devices")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the private resources
for the port can be freed by rte_eth_dev_close().
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The memory for mark table is allocated during port start.
But the allocated memory is freed only during port close
or driver unload which in turn causes a memory leakage
on each port start/stop.
Fixed it by moving the memory free to port stop.
Fixes: 94eb699bc8 ("net/bnxt: support flow mark action")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Driver destroy the VNIC when the port is brought down.
Port HW filter setting such as promiscuos, allmulti and
VLAN filtering will be applied when port is started.
Fixed to return success silently for these callbacks
when port is stopped. Also fixed to clear "bp->dev_stopped"
before invoking bnxt_vlan_offload_set_op() in bnxt_dev_start_op().
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
HWRM_VNIC_CFG command to configure VNIC dynamically with
traffic running is not working. Driver has to free and
recreate the VNIC and then reconfigure the VNIC filters.
Fixes: 7fe5668d2e ("net/bnxt: support VLAN filter and strip")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
There is no condition check for the user requested operation
for VLAN filtering. As a result, VLAN filtering is getting disabled
when the user enables/disables VLAN stripping on same port.
The function bnxt_hwrm_clear_l2_filter() didn't actually free
L2 filter in HW if the reference count of filter is zero.
Fixed it by incrementing the reference count of filter in
bnxt_alloc_filter() routine.
Because of the recent changes in bnxt_hwrm_clear_l2_filter(),
change was needed in the routine bnxt_set_default_mac_addr_op()
to destroy and re-create the default filter when the user
changes the default MAC of the port.
Fixes: 5c1171c972 ("net/bnxt: refactor filter/flow")
Fixes: 6118503d80 ("net/bnxt: fix VLAN filtering")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Use rte_malloc_virt2iova() to obtain the IO address of a
virtual address obtained through rte_malloc().
Fixed to use the iova address returned by rte_memzone_reserve_aligned()
as the call always returns with populating "mz->iova" with
rte_malloc_virt2iova(mz->addr).
Removed redundant rte_mem_lock_page() call to lock the pages.
Fixes: f55e12f334 ("net/bnxt: support extended port counters")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In FreeBSD environment, nic_uio driver does not support interrupts
and rte_intr_callback_register() will fail to register interrupts
which in turn causes bnxt driver probe failure.
Fixed driver to ignore interrupt callback failures in FreeBSD.
Also fixed to not use a dedicated completion ring for async events
from FW and process these events on RXQ0 in FreeBSD.
Fixes: 6de4c538b3 ("net/bnxt: fix error handling in port start")
Fixes: 43f78b380f ("net/bnxt: retry IRQ callback deregistration")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
If flow create fails due to not enough filter resources,
driver does not populate the rte_flow_error using
rte_flow_error_set().
Since "rte_errno" could have garbage value and is not reliable,
it could cause a segfault in the stack in port_flow_complain().
Fix it to set rte_flow_error using rte_flow_error_set()
when flow create fails due to not enough filter resources.
Fixes: 5c1171c972 ("net/bnxt: refactor filter/flow")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The compiler warning is:
from .../drivers/net/ionic/ionic_dev.c:7:
.../drivers/net/ionic/ionic_if.h:202:5: note: ‘rsvd’ declared here
u8 rsvd[62];
^
This has been observed with gcc 4.8.5, newer 9+ compiler are not giving
this warning.
Warning is a reminder to the user that there are some fields in the
struct not initialized with the default value.
But the C standard clarifies that in that case the field value will be
zero and code is aware of this behavior, so no initializing to a default
value is intentional and it is safe to ignore this compiler warning.
Adding '-Wno-missing-field-initializers' compiler flag to disable the
warning.
Reported-by: Anoob Joseph <anoobj@marvell.com>
Reported-by: Raslan Darawsheh <rasland@mellanox.com>
Reported-by: Xueming Zhang <xuemingx.zhang@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
In the root table, there is some limitation of total number of header
modify actions, 16 or 8 for each. But in other tables, there is no
such strict limitation. In an IPv6 case, the IP fields modifying
will occupy more actions than that in IPv4, so the total support
number should be increased in order to support as many actions as
possible for an IPv6 + TCP packet.
And in the meanwhile, the memory consumption should also be taken
into consideration because sometimes only several actions are needed.
The root table checking could also be done in low layer driver and
the error code will be returned if the actions number is over the
maximal supported value.
Fixes: 0e9d000276 ("net/mlx5: check maximum modify actions number")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The meter suffix flow item pointer restore is not correct to decrease
a fixed value. The incorrect operation will cause incorrect match to
the meter suffix flow, the flow create will fail once the magic number
in the wrong offset memory start with RTE_FLOW_ITEM_TYPE_END.
The pointer should decrease the real offset it increases.
Set the decrease value to the real offset the pointer increases to fix
the issue.
Fixes: 9ea9b049a9 ("net/mlx5: split meter flow")
Cc: stable@dpdk.org
Reported-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch adds to MLX5 PMD support of matching on GTP item,
fields msg_type and teid, according to RFC [1].
GTP item validation and translation functions are added and called.
GTP tunnel type is added to supported tunnels.
[1] http://mails.dpdk.org/archives/dev/2019-December/152799.html
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Previous fix added translation of Rx hash fields to PRM format.
This patch optimizes the fix, to perform value translation only
if value is not zero.
In case value is zero, there is no need to translate it.
Fixes: c3e33304a7 ("net/mlx5: fix setting of Rx hash fields")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The free on completion queue keeps the indices of elts array,
all mbuf stored below this index should be freed on arrival
of normal send completion. In debug version it also contains
an index of completed transmitting descriptor (WQE) to check
queues synchronization.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The new software manged entity is introduced in Tx datapath
- free on completion queue. This queue keeps the information
how many buffers stored in elts array must freed on send
completion. Each element of the queue contains transmitting
descriptor index to be in synch with completion entries (in
debug build only) and the index in elts array to free buffers.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This is preparation step, we are going to store the index
of elts to free on completion in the dedicated free on
completion queue, this patch updates the elts freeing routine
and updates Tx error handling routine to be synced with
coming new queue.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The complete request flag is set once per Tx burst call,
the code of appropriate routine moved to the end of sending
loop. This is preparation step to remove WQE reserved field
usage to store index of elts to free.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Add support for reading the firmware version.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
