The --export-dynamic linker option is only applicable to ELF.
On Windows, where COFF is used, it causes warnings:
x86_64-w64-mingw32-ld: warning: --export-dynamic is not supported
for PE+ targets, did you mean --export-all-symbols? (MinGW)
LINK : warning LNK4044: unrecognized option '/-export-dynamic';
ignored (clang)
Don't add --export-dynamic on Windows anywhere.
Fixes: b031e13d7f ("build: fix plugin load on static build")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Performance measurement (elapsed time and Gbps) are based on Linux
clock() API. The resolution is improved by replacing the clock() API
with rte_rdtsc_precise() API.
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Up to this commit measuring the parsing elapsed time and Giga bits per
second performance was done on the aggregation of all QPs (per core).
This commit separates the time measurements per individual QP.
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Up to this commit the regex application was running with multiple QPs on
a single core. This commit adds the option to specify a number of cores
on which multiple QPs will run.
A new parameter 'nb_lcores' was added to configure the number of cores:
--nb_lcores <num of cores>.
If not configured the number of cores is set to 1 by default. On
application startup a few initial steps occur by the main core: the
number of QPs and cores are parsed. The QPs are distributed as evenly
as possible on the cores. The regex device and all QPs are initialized.
The data file is read and saved in a buffer. Then for each core the
application calls rte_eal_remote_launch() with the worker routine
(run_regex) as its parameter.
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Up to this commit the input data file was read from scratch for each QP,
which is redundant. Starting from this commit the data file is read only
once at startup. Each QP will clone the data.
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Up to this commit the regex application used one QP which was assigned a
number of jobs, each with a different segment of a file to parse. This
commit adds support for multiple QPs assignments. All QPs will be
assigned the same number of jobs, with the same segments of file to
parse. It will enable comparing functionality with different numbers of
QPs. All queues are managed on one core with one thread. This commit
focuses on changing routines API to support multi QPs, mainly, QP scalar
variables are replaced by per-QP struct instance. The enqueue/dequeue
operations are interleaved as follows:
enqueue(QP #1)
enqueue(QP #2)
...
enqueue(QP #n)
dequeue(QP #1)
dequeue(QP #2)
...
dequeue(QP #n)
A new parameter 'nb_qps' was added to configure the number of QPs:
--nb_qps <num of qps>.
If not configured, nb_qps is set to 1 by default.
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Function rte_pktmbuf_pool_create() is moved from init_port() routine to
run_regex() routine. Looking forward on multi core support - init_port()
will be called only once as part of application startup while mem pool
creation should be called multiple times (per core).
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
According to RTE flow user guide, PMD will not keep flow rules after
port stop. Application resources that refer to flow rules become
obsolete after port stop and must not be used.
Testpmd maintains linked list of active flows for each port. Entries in
that list are allocated dynamically and must be explicitly released to
prevent memory leak.
The patch releases testpmd port flow_list that holds remaining flows
before port is stopped.
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently, the queue stats mapping has the following problems:
1) Many PMD drivers don't support queue stats mapping. But there is no
failure message after executing the command "set stat_qmap rx 0 2 2".
2) Once queue mapping is set, unrelated and unmapped queues are also
displayed.
3) The configuration result does not take effect or can not be queried
in real time.
4) The mapping arrays, "tx_queue_stats_mappings_array" &
"rx_queue_stats_mappings_array" are global and their sizes are based
on fixed max port and queue size assumptions.
5) These record structures, 'map_port_queue_stats_mapping_registers()'
and its sub functions are redundant for majority of drivers.
6) The display of the queue stats and queue stats mapping is mixed
together.
Since xstats is used to obtain queue statistics, we have made the
following simplifications and adjustments:
1) If PMD requires and supports queue stats mapping, configure to driver
in real time by calling ethdev API after executing the command "set
stat_qmap rx/tx ...". If not, the command can not be accepted.
2) Based on the above adjustments, these record structures,
'map_port_queue_stats_mapping_registers()' and its sub functions can
be removed. "tx-queue-stats-mapping" & "rx-queue-stats-mapping"
parameters, and 'parse_queue_stats_mapping_config()' can be removed
too.
3) remove display of queue stats mapping in 'fwd_stats_display()' &
'nic_stats_display()', and obtain queue stats by xstats. Since the
record structures are removed, 'nic_stats_mapping_display()' can be
deleted.
Fixes: 4dccdc789b ("app/testpmd: simplify handling of stats mappings error")
Fixes: 013af9b6b6 ("app/testpmd: various updates")
Fixes: ed30d9b691 ("app/testpmd: add stats per queue")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This is already 'else' leg of the opposite comparison, simple 'else'
will be logically same.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
'flag' is initialized to '0' but it is overwritten later, moving the
declaration where it is used and initialize with actual value.
Fixes: 0101a0ec62 ("app/procinfo: add --show-mempool")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The intention with the "sizeof(0)" usage is not clear, but the 'stats'
already 'memset' by 'rte_cryptodev_stats_get()' API, removing 'memset'
in application.
Fixes: fe773600fe ("app/procinfo: add --show-crypto")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
'parse_xstats_ids()' return 'int'. The return value is assigned to
'nb_xstats_ids' unsigned value, later negative check on this variable is
wrong.
Adding interim 'int' variable for negative check.
Fixes: 7ac16a3660 ("app/proc-info: support xstats by ID and by name")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
'_filters' is compared twice, second one will be always false, removing
it using the message more relevant to the '_filters'.
Fixes: 2deb6b5246 ("app/procinfo: add collectd format and host id")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Since items are static then the default values will be zero,
thus the memset to zero value is just a redundant code.
Also remove the all not needed variables, that can be replaced
with direct set to the structure itself.
Fixes: bf3688f1e8 ("app/flow-perf: add insertion rate calculation")
Cc: stable@dpdk.org
Signed-off-by: Wisam Jaddo <wisamm@nvidia.com>
Reviewed-by: Alexander Kozyrev <akozyrev@nvidia.com>
Reviewed-by: Suanming Mou <suanmingm@nvidia.com>
The clock() function is not good practice to use for multiple
cores/threads, since it measures the CPU time used by the process
and not the wall clock time, while when running through multiple
cores/threads simultaneously, we can burn through CPU time much
faster.
As a result this commit will change the way of measurement to use
rd_tsc, and the results will be divided by the processor frequency.
Signed-off-by: Wisam Jaddo <wisamm@nvidia.com>
Reviewed-by: Alexander Kozyrev <akozyrev@nvidia.com>
Reviewed-by: Suanming Mou <suanmingm@nvidia.com>
One of the ways to increase the insertion/deletion rate is to use
multi-threaded insertion/deletion. Thus it's needed to have support
for testing and measure those rates using flow-perf application.
Now we generate cores and distribute all flows to those cores,
and start inserting/deleting in parallel.
The app now receive the cores count to use from command line option,
then it distribute the rte_flow rules evenly between the cores, and
start inserting/deleting. Each worker will report it's own results,
and in the end the MAIN worker will report the total results for all
cores.
The total results are calculated using RULES_COUNT divided over
max time used between all cores.
Also this touches the memory area, since inserting using multiple cores
in same time the pre solution for memory is not valid, thus now we save
memory before and after each allocation for all cores. In the end we
pick the min pre memory and the max post memory from all cores.
The difference between those values represent the total memory consumed
by the total rte_flow rules from all cores, and then report the total
size of single rte_flow in byte for each port.
How to use this feature:
--cores=N
Where 1 =< N <= RTE_MAX_LCORE
Signed-off-by: Wisam Jaddo <wisamm@nvidia.com>
Reviewed-by: Alexander Kozyrev <akozyrev@nvidia.com>
Reviewed-by: Suanming Mou <suanmingm@nvidia.com>
Provide the flows_handler() function the ability to control
flow performance processes. It is made possible after the
introduction of the insert_flows() function.
Also provide to the flows_handler() function the ability to print
the DPDK layer memory consumption of rte_flow rule, regardless
if deletion feature is enabled or not, while in previous
solution it was printing all memory changes after flows_handler().
Thus if deletion is there, it will not provide any memory that
represents the rte_flow rule size.
Also current design is easier to read and understand.
Signed-off-by: Wisam Jaddo <wisamm@nvidia.com>
Reviewed-by: Alexander Kozyrev <akozyrev@nvidia.com>
Reviewed-by: Suanming Mou <suanmingm@nvidia.com>
When dpdk is compiled as static libraries, it is not possible
to load a plugin from an application. We get the following error:
EAL: librte_pmd_xxxx.so: undefined symbol: per_lcore__rte_errno
This happens because the dpdk symbols are not exported. Add them to the
dynamic symbol table by using '-Wl,--export-dynamic'. This option was
previously present when compiled with Makefiles, it was introduced in
commit f9a08f6502 ("eal: add support for shared object drivers")
Also add it to the pkg-config file.
Fixes: 16ade738fd ("app/testpmd: build with meson")
Fixes: 89f0711f9d ("examples: build some samples with meson")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
If there was no RTE_NET_I40E configured the static routine
str2flowtype() was not used causing compilation warning.
The str2flowtype() is moved under #ifdef RTE_NET_I40E block.
Fixes: 1be514fbce ("ethdev: remove legacy FDIR filter type support")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The rte_flow_item_eth and rte_flow_item_vlan items are refined.
The structs do not exactly represent the packet bits captured on the
wire anymore so add_*_header functions should use real header instead of
the using rte_flow_item_* struct.
Replace the rte_flow_item_* with the existing corresponding rte_*_hdr.
Fixes: 09315fc838 ("ethdev: add VLAN attributes to ethernet and VLAN items")
Signed-off-by: Xiaoyu Min <jackmin@nvidia.com>
Setting MTU after each 'rte_eth_dev_configure()' prevents using
"--max-pkt-len=N" parameter and "port config all max-pkt-len #" command
This is breaking DTS scatter test case which is using
"--max-pkt-len=9000" testpmd parameter.
Reverting workaround to recover the DTS testcase.
Fixes: 1c21ee95cf ("app/testpmd: fix MTU after device configure")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Bo Chen <box.c.chen@intel.com>
testpmd provides commands to test tunnel offload rte_flow
capabilities. Testpmd tunnel commands allow to configure new ofloaded
tunnel types, list existing offloaded tunnels and destroy existing
offloaded tunnels.
Tunnel offload commands allowed parameters repetition. For example,
the following commands were accepted:
testpmd> flow tunnel create 0 create 1 type vxlan
or
testpmd> flow tunnel list 0 list 1
Current patch fixed that fault. Correct tunnel commands syntax is:
testpmd> flow tunnel create <port> type <tunnel type>
testpmd> flow tunnel list <port>
testpmd> flow tunnel destroy <port> id <tunnel id>
Fixes: 1b9f274623 ("app/testpmd: add commands for tunnel offload")
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch defines new RSS offload types for eCPRI. For eCPRI with
Message Type 0, the hash field is physical channel ID.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
All EAL flags tests are run by calling the "eal_flags_autotest" command.
There is no compatibility to maintain for sub commands only called by
meson.
Fixes: db27370b57 ("eal: replace blacklist/whitelist options")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The options and variables are renamed to use block/allow terminology.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Replace -w / --pci-whitelist with -a / --allow options
and --pci-blacklist with --block.
The -b short option remains unchanged.
Allow the old options for now, but print a nag
warning since old options are deprecated.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Remove unused assignment statement as the assigned variable is
not used in the code further.
Coverity issue: 363690
Fixes: 6c583103a2 ("test/ring: factorize object checks")
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
When DPDK is compiled with gcc < 9 with the optimization level set to 1
gcc sees zcd in test_ring.h as possibly being uninitialised. To correct
this error if statements from _st_ring_dequeue_bulk and
_st_ring_enqueue_bulk were corrected within test_ring_mt_peek_stress_zc.c
Fixes: f72299fd15 ("test/ring: add stress tests for zero copy API")
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Fix SEGFAULT when nb_timer_adapters command line parameter is
set to 0.
Fixes: 98c6292105 ("app/eventdev: add options for event timer adapter")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The print statement had a typo, "sesionless" should have been
"sessionless". This is now fixed.
Fixes: afcfa2fd04 ("test/crypto: check session-less support")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
This patch fixes bypassed out of place test for PMDs that support it.
Fixes: 4868f6591c ("test/crypto: add cases for raw datapath API")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
In two test cases, the op value is set by the return of the
process_crypto_request function, which may be NULL. The op->status
value was checked afterwards, which was causing a dereference issue.
To fix this, a temporary op variable is used to hold the return
from the process_crypto_request function, so the original op->status
can be checked after the possible NULL return value.
The original op value is then set to hold the temporary op value.
Coverity issue: 363452, 363465
Fixes: 4868f6591c ("test/crypto: add cases for raw datapath API")
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch fixes the GMAC SGL test that fails to bypass
unsupported PMDs.
Fixes: dcdd01691f ("test/crypto: add GMAC SGL")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Yu Jiang <yux.jiang@intel.com>
In 'rte_eth_dev_configure()', if 'DEV_RX_OFFLOAD_JUMBO_FRAME' is not set
the max frame size is limited to 'RTE_ETHER_MAX_LEN' (1518).
This is mistake because for the PMDs that has frame size bigger than
"RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN" (18 bytes), the MTU becomes
less than 1500, causing a valid frame with 1500 bytes payload to be
dropped.
Since 'rte_eth_dev_set_mtu()' works as expected, it is called after
'rte_eth_dev_configure()' to fix the MTU.
It may look redundant to set MTU after 'rte_eth_dev_configure()', both
with default values, but it is not, the resulting MTU config can be
different in the device based on frame overhead of the PMD.
And instead of setting the MTU to default value, it is first get via
'rte_eth_dev_get_mtu()' and set again, this is to cover cases MTU
changed from testpmd command line.
'rte_eth_dev_set_mtu()', '-ENOTSUP' error is ignored to prevent
irrelevant warning messages for the virtual PMDs.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Tested-by: Igor Romanov <igor.romanov@oktetlabs.ru>
When an age action becomes aged-out the next call for
rte_flow_get_aged_flows API should return the action context supplied
by the action configuration structure.
In case the age action is created by the shared action API, the shared
action context of the Testpmd application was not set.
In addition, the application handler of the contexts returned by the
rte_flow_get_aged_flows API didn't consider the fact that the action
could be set by the shared action API and considered it as regular flow
context.
This caused a crash in Testpmd when the context is parsed.
This patch set context type in the flow and shared action context and
uses it to parse the aged-out contexts correctly.
Signed-off-by: Matan Azrad <matan@nvidia.com>
Acked-by: Dekel Peled <dekelp@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The fix of max_rx_pkt_len for allowing VLAN packets in all cases
was breaking configuration of some drivers. Example with virtio:
Ethdev port_id=0 max_rx_pkt_len 11229 > max valid value 9728
Fail to configure port 0
Trying to fix the logic was revealing other issues in some drivers.
That's why it is decided to revert.
The workaround for the original issue would be
to set the MTU explicitly from the application
with rte_eth_dev_set_mtu().
See RFC: https://patches.dpdk.org/patch/83756/
Fixes: f6870a7ed6 ("app/testpmd: fix max Rx packet length for VLAN packet")
Cc: stable@dpdk.org
Reported-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
cmdline_numtype member names clash with Windows system identifiers.
Add RTE_ prefix to cmdline constants to avoid this and possible
future conflicts.
Suggested-by: Ranjit Menon <ranjit.menon@intel.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Jie Zhou <jizh@microsoft.com>
Tested-by: Jie Zhou <jizh@microsoft.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Avoid code duplication by combining single and multi threaded tests
Also, enable support for more than 2 writers
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Return error if Add/Delete fail in multiwriter perf test
Return error if single or multi writer test fails
Fixes: eff30b59cc ("test/lpm: add RCU performance tests")
Cc: stable@dpdk.org
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Fix incorrect calculations for LPM adds, LPM deletes,
and average cycles in RCU QSBR perf tests
Since, rcu qsbr tests run for 'RCU_ITERATIONS' and not
'ITERATIONS', replace 'ITERATIONS' with 'RCU_ITERATIONS'
for calculating adds, deletes, and cycles.
Also, for multi-writer perf test, each writer only writes
half of NUM_LDEPTH_ROUTE_ENTRIES.
For 2 writers, total adds (or deletes) should be
(RCU_ITERATIONS * NUM_LDEPTH_ROUTE_ENTRIES) instead of
(2 * RCU_ITERATIONS * NUM_LDEPTH_ROUTE_ENTRIES).
Since, for both the single and multi writer tests, total adds/deletes
is equal to (RCU_ITERATIONS * NUM_LDEPTH_ROUTE_ENTRIES),
this has been replaced with a macro 'TOTAL_WRITES' and furthermore,
'g_writes' has been removed since it is always a fixed value
equal to TOTAL_WRITES.
Fixes: eff30b59cc ("test/lpm: add RCU performance tests")
Cc: stable@dpdk.org
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
A "+" symbol was incorrectly placed at the beginning of a line,
this is now removed.
Fixes: 52af6ccb2b ("telemetry: add utility functions for creating JSON")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Currently, flow-perf measures the performance of
rule installation/deletion operations by breaking
down the entire number of operations into windows
of fixed size (i.e., 100000 operations per window).
Then, flow-perf measures the total time per window
and computes an average time across all windows.
This commit allows flow-perf users to configure
the number of rules per window instead of using
a fixed pre-compiled value. To do so, users must
pass --rules-batch=N, where N is the number of
rules per window (or batch).
For consistency reasons, flow_count variable is
now renamed to rules_count. This variable is the
total number of rules to be installed/deleted.
For example, if a user wants to measure how much
time it takes to install 1M rules in a certain NIC,
he/she can input:
--rules-count=1000000
This way flow-perf will break down 1M flow rules into
10 batches of 100k flow rules each (this is the default
batch size) and compute an average across the 10
measurements.
Now, if the user modifies the number of rules per
batch as follows:
--rules-count=1000000 --rules-batch=500000
then flow-perf will break down 1M flow rules into
2 batches of 500k flow rules each and compute the
average across the 2 measurements.
Finally, this commit also adds default variables
to the usage function instead of hardcoded values.
Signed-off-by: Georgios Katsikas <katsikas.gp@gmail.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
The rte_flow_item_eth and rte_flow_item_vlan items are refined.
The structs do not exactly represent the packet bits captured on the
wire anymore so set raw_encap/decap commands should only copy real
header instead of the whole struct.
Replace the rte_flow_item_* with the existing corresponding rte_*_hdr.
Fixes: 09315fc838 ("ethdev: add VLAN attributes to ethernet and VLAN items")
Signed-off-by: Xiaoyu Min <jackmin@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This attribute helps PMDs to tell actions supposed to work
on the so-called hardware e-switch level from regular ones.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
When the max Rx packet length is smaller than the sum of MTU size and
ether overhead size, it should be enlarged, otherwise the VLAN packets
will be dropped.
Fixes: 35b2d13fd6 ("net: add rte prefix to ether defines")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When the number of forwarding cores changed in runtime, the issue may
be encountered:
If the nbcore set little than current nbcore, the forwarding thread
will still running on the extra cores. Therefore, trying to stop
forwarding will hang testpmd, since it will wait for the extra cores to
stop.
So do not allow to change nbcore number when forwarding is running.
Fixes: 0c0db76f42 ("app/testpmd: separate forward config setup from display")
Cc: stable@dpdk.org
Signed-off-by: Zhenghua Zhou <zhenghuax.zhou@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
In the current implementation of eCPRI flow item parsing of the CLI,
the token items in the list are not connected properly.
A command containing "rtc_ctrl rtc_id spec 14857 rtc_id mask 0xff00"
will be considered invalid. In order to support spec with mask, the
common entry needs to be typed twice and the whole command will be
too long.
By changing the token lists, it could support spec with mask without
backing from the entry of the item.
Fixes: 17d103cc93 ("app/testpmd: add eCPRI in flow creation patterns")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
