By default, only first 3 bytes of GRE key will be used for hash or
FD calculation. With these changes, it can select 3 or 4 bytes of
GRE key for hash or FD calculation.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
The default input set of fields of a received packet are loaded from
firmware, which cannot be modified even users want to use different
fields for RSS or flow director. Here adds more flexibilities of
selecting packet fields for hash calculation or flow director for
users.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
use dev_type to distinguish between vdev's and pdev's.
remove pci_dev branches.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The driver fields have been added the rte_eth_dev_data so that it is no
longer necessary access this data through the pci_dev pointer.
The following fields have been added to rte_eth_dev_data:
dev_flags, and macros for dev_flags.
kdrv
numa_node
drv_name
Add function rte_eth_copy_pci_info
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
[Thomas: remove useless flags]
Removed following functions
> rte_eth_dev_save and
> rte_eth_dev_get_changed_port
Added 2 new functions
> rte_eth_dev_get_port_by_name
> rte_eth_dev_get_port_by_addr
Compiled on Linux for following targets
> x86_64-native-linuxapp-gcc
> x86_64-native-linuxapp-clang
> x86_x32-native-linuxapp-gcc
Compiled on FreeBSD for following targets
> x86_64-native-bsdapp-clang
> x86_64-native-bsdapp-gcc
Tested on Linux/FreeBSD:
> port attach eth_null
> port start all
> port stop all
> port close all
> port detach 0
> port attach eth_null
> port start all
> port stop all
> port close all
> port detach 0
Successful run of checkpatch.pl on the diffs
Successful validate_abi on Linux for following targets
> x86_64-native-linuxapp-gcc
> x86_64-native-linuxapp-clang
Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Remove the deprecation tag and notice for imissed as it is a generic
register that accounts for packets that were dropped by the HW,
because there are no available mbufs (RX queues are full). imissed is
different to ierrors and can help with general debug.
Fixes: 49f386542af4 ("ethdev: remove driver specific stats")
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Update the strings used for presenting stats to adhere
to the scheme previously presented. Updated xstats_get()
function to handle Q information only if xstats() is not
implemented in the PMD, providing the PMD with the needed
flexibility to expose its extended Q stats.
Add extended statistic section to the programmers
guide, poll mode driver section. This section describes
how the strings stats are formatted, and how the client
code can use this to gather information about the stat.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Add the ability for the upper layer to query RX/TX queue information.
Add into rte_eth_dev_info new fields to represent information about
RX/TX descriptors min/max/alig nnumbers per queue for the device.
Add new structures:
struct rte_eth_rxq_info
struct rte_eth_txq_info
new functions:
rte_eth_rx_queue_info_get
rte_eth_tx_queue_info_get
into rte_etdev API.
Left extra free space in the queue info structures,
so extra fields could be added later without ABI breakage.
Add new fields:
rx_desc_lim
tx_desc_lim
into rte_eth_dev_info.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch adds one new API to get dcb related info.
rte_eth_dev_get_dcb_info
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Different NIC has its specific constraint on the multi-queue
configuration, so move the checking from ethdev lib to drivers.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Define the new modes and modify the filter and mask structures for
the mac vlan and tunnel modes.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Old flow director API have been replaced by rte_eth_dev_filter_ctrl
since release 2.0. And no driver in current code support these functions.
All the removed functions are listed below:
- rte_eth_dev_fdir_add_perfect_filter;
- rte_eth_dev_fdir_add_signature_filter;
- rte_eth_dev_fdir_get_infos;
- rte_eth_dev_fdir_remove_perfect_filter;
- rte_eth_dev_fdir_remove_signature_filter;
- rte_eth_dev_fdir_set_masks;
- rte_eth_dev_fdir_update_perfect_filter;
- rte_eth_dev_fdir_update_signature_filter;
The library version was already incremented in a previous patch.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
[Thomas: fix mlx4 and update release notes]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The extended SCTP flow entries are now part of the standard API.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The Rx interrupt feature is now part of the standard ABI.
Because of changes in rte_intr_handle and struct rte_eth_conf,
the eal and ethdev library versions are incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
To obtain detachable flag, pci_drv is accessed in rte_eth_dev_is_detachable().
But pci_drv is only valid if port is enabled. Not to cause illegal access,
add rte_eth_dev_is_valid_port() before accessing.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Fix for ABI breakage introduced in LRO addition. Moves
lro bitfield to the end of the struct/member.
Fixes: 8eecb3295aed (ixgbe: add LRO support)
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com>
The patch adds two dev_ops functions to enable and disable rx queue
interrupts.
In addition, it adds rte_eth_dev_rx_intr_ctl/rx_intr_q to support
per port or per queue rx intr event set.
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Move #ifdef __cplusplus to the end of the file.
Fixes: 64b7acd861b1 ("ethdev: add multicast address filtering")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Found by coccinelle script.
If rte_zmalloc() failed in rte_eth_dev_callback_register
then NULL pointer would be dereferenced.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
[Thomas: restore pointer comparison style]
The function rte_eth_dev_is_valid_port is good way to have all
drivers using same function and solves several hotplug related
bugs from drivers not checking attached flag.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The internal functions must be marked with the doxygen command @internal.
The allocate and release_port functions are not restricted only to dummy
drivers.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
There are close and detach functions in ethdev.
To keep a consistent naming, PCI functions called by ethdev detach
must be named "detach" instead of "close".
Fix also comments which mix close and uninit names.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Remove non generic stats in rte_stats_strings and mark the relevant
fields in struct rte_eth_stats as deprecated.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Extend rte_eth_xstats_get to retrieve additional stats from the device
driver as well the ethdev generic stats.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
add new apis:
- rte_eth_dev_get_reg_length
- rte_eth_dev_get_reg_info
- rte_eth_dev_get_eeprom_length
- rte_eth_dev_get_eeprom
- rte_eth_dev_set_eeprom
to enable reading device parameters (register and
eeprom) based upon ethtool alike data parameter specification.
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add new api:
- rte_eth_dev_default_mac_addr_set
The new api, rte_eth_dev_default_mac_addr_set, uses the
existing dev_op, mac_addr_set, to enable setting mac
addr from ethdev level.
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Fix return value, using the macro input instead of -EINVAL.
Fixes: 75acd57ad025 ("ethdev: introduce valid port helper")
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Change the order that user supplied RX and TX callbacks are called
to the order that they were added (fifo).
The previous calling order was the reverse of this (lifo) and was
counter intuitive for users.
Suggested-by: Robert Sanford <rsanford@akamai.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
The patch fixes doxygen comments of below functions.
- rte_eth_dev_close()
Add description about when the function can be called and also about
what kind of resources will be freed.
- rte_eth_dev_detach()
Add description about when the function can be called.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add ethdev API to enable and read IEEE1588/802.1AS PTP timestamps
from devices that support it. The following functions are added:
rte_eth_timesync_enable()
rte_eth_timesync_disable()
rte_eth_timesync_read_rx_timestamp()
rte_eth_timesync_read_tx_timestamp()
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
[Thomas: merged with new macro VALID_PORTID_OR_ERR_RET]
To support querying hash key size per port, an new field of
'hash_key_size' was added in 'struct rte_eth_dev_info' for storing
hash key size in bytes.
The correct hash key size in bytes should be filled into the
'struct rte_eth_dev_info', to support querying it.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch removes CONFIG_RTE_LIBRTE_EAL_HOTPLUG option, and enables it
as default in both Linux and BSD.
Also, to support port hotplug, rte_eal_pci_scan() and below missing
symbols should be exported to ethdev library.
- rte_eal_parse_devargs_str()
- rte_eal_pci_close_one()
- rte_eal_pci_probe_one()
- rte_eal_pci_scan()
- rte_eal_vdev_init()
- rte_eal_vdev_uninit()
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
The patch consolidates below functions, and implemented in common
eal code.
- pci_map_device()
- pci_unmap_device()
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
This patch adds a new struct rte_eth_l2_flow to support
l2_payload flow type.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This path renames the mirror type in rte_eth_mirror_conf and macros,
and rework the mirror set in ixgbe drivers by using new definition.
It also fixes some coding style.
Test report: http://dpdk.org/ml/archives/dev/2015-June/019118.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Rename rte_eth_vmdq_mirror_conf to rte_eth_mirror_conf and move
the maximum rule id check from ethdev level to driver.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
It configures specific registers to enable double vlan stripping
on RX side and insertion on TX side.
The RX descriptors will be parsed, the vlan tags and flags will be
saved to corresponding mbuf fields if vlan tag is detected.
The TX descriptors will be configured according to the
configurations in mbufs, to trigger the hardware insertion of
double vlan tags for each packets sent out.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The parameter tx_free_thresh is not consistent between the drivers:
some use it as rte_eth_tx_burst() requires, some release buffers when
the number of free descriptors drop below this value.
Let's use it as most fast-path code does, which is the latter, and update
comments throughout the code to reflect that.
Signed-off-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The code pattern is repeated so many times, it is a good
idea to introduce template like other code here uses.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This fixes lots of complaints from checkpatch about whitespace
and other non-material things. Important to fix the old code now
befor more code does copy/paste of same junk.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since rte_eth_devices is in BSS, the address of rte_eth_devices
plus port_id can not ever be NULL for a valid port_id number.
Remove this unnecessary check and fix the code style.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The new version nodes inherit from the previous ones which
already include a default catch-all line for not exported symbols.
Reported-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
On machines that are strict on pointer alignment, current code breaks
on GCC's -Wcast-align checks on casts from narrower to wider types.
This patch introduces new unaligned_uint(16|32|64)_t types, which
correctly retain alignment in such cases. Strict alignment
architectures will need to define CONFIG_RTE_ARCH_STRICT_ALIGN in
order to effect these new types.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Statistics offsets in the rte_stats_strings[] array are always 64-bit aligned.
However, the compiler is unaware of this fact and complains on -Wcast-align.
This patch modifies the code to use RTE_PTR_ADD(), thereby silencing the
compiler by casting through (void *).
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
