The rte_cryptodev_pmd.* files are for drivers only and should be
private to DPDK, and not installed for app use.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Start a new release cycle with empty release notes.
The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Added support for crypto adapter OP_FORWARD mode.
As OcteonTx CPT crypto completions could be out of order, each crypto op
is enqueued to CPT, dequeued from CPT and enqueued to SSO one-by-one.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
In poll mode driver of octeontx2 the RQ is connected to a CQ and it is
responsible for asserting backpressure to the CGX channel.
When event eth Rx adapter is configured, the RQ is connected to a event
queue, to enable backpressure we need to configure AURA assigned to a
given RQ to backpressure CGX channel.
Event device expects unique AURA to be configured per ethernet device.
If multiple RQ from different ethernet devices use the same AURA,
the backpressure will be disabled, application can override this
using devargs:
-a 0002:0e:00.0,force_rx_bp=1
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Currently LSO formats setup initially are expected to be
compile time constants and start from 0.
Change the logic in slow and fast path so that LSO format indexes
are only determined runtime.
Fixes: 3b635472a9 ("net/octeontx2: support TSO offload")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Configure xaq pool based on number of in-use crypto queues to avoid CPT
add work failure due to xaq buffer run out. This patch configures
OTX2_CPT_DEFAULT_CMD_QLEN number of xae entries per queue pair.
Fixes: 29768f78d5 ("event/octeontx2: add crypto adapter framework")
Cc: stable@dpdk.org
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Parameter queue_pair_id of crypto adapter queue pair add/del operation
can be -1 to select all pre configured crypto queue pairs. Added support
for the same in driver. Also added a member in cpt qp structure to
indicate binding state of a queue pair to an event queue.
Fixes: 29768f78d5 ("event/octeontx2: add crypto adapter framework")
Cc: stable@dpdk.org
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Ankur Dwivedi <adwivedi@marvell.com>
When device is re-configured, memory allocated for work slot is freed
and new memory is allocated. Due to this we may loose some important
configurations/mappings done with initial work slot memory.
For example, whenever rte_event_eth_tx_adapter_queue_add is called
some important meta i.e. txq handle is stored in work slot structure.
If device gets reconfigured after this tx adaptor add, txq to work
slot mapping will be lost resulting in seg fault during packet
processing, as txq handle could not be retrieved from work slot.
Fixes: 67b5f46864 ("event/octeontx2: add port config functions")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Use virtual counter for estimating current bucket as PMU cannot be
reliably used to estimate time.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reduce amount of memory used by chunk pool when the mempool used
is OCTEONTX2 NPA.
Previously, the number of chunks configured when NPA is used is
equal to the number of timers requested plus the number of buckets
and if the max timeout is long enough w.r.t. resolution requested
there will a large number of buckets which would cause high memory
usage.
Reduce the number of chunks when NPA is used to the number of timers
requested as buckets that are processed chunk lists are automatically
freed.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Simplify timer bucket estimation we need not align buckets to
power of 2 instead use reciprocal division to compute mod.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
When XAQ pool is being re-configured, and if the same memzone
is used for fc_mem when freeing the old mempool the fc_mem
will be incorrectly updated with the free count.
Fixes: ffa4ec0b60 ("event/octeontx2: allow adapters to resize inflight buffers")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The rte_eventdev_pmd*.h files are for drivers only and should be private
to DPDK, and not installed for app use.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Enhance Tx path cache locality, remove current tag type and group
stores from datapath to conserve store buffers.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
CN98xx SoC comes up with two CPT blocks wrt
CN96xx, CN93xx, to achieve higher performance.
Adding support to allocate all LFs of VF with even BDF from CPT0
and all LFs of VF with odd BDF from CPT1.
If LFs are not available in one block then they will be allocated
from alternate block.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Unlinking queues from port should be done during port release. Doing it
during device re-configuration could result in segfault as ports array
is re-allocated based on new number of ports.
Fixes: f7ac8b66b2 ("event/octeontx2: support linking queues to ports")
Cc: stable@dpdk.org
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Fix unconditional Tx flush, in case of Tx only we need to check if
work slot is non-empty before issuing flush.
Also, in packet retransmit cases added check for the reference
count and flush the work slot only for the last packet.
Fixes: cb7ee83b63 ("event/octeontx2: improve single flow performance")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Since selftest now depends on dynamic mbuf fields it is not
feasible to run selftest on device probe.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The drivers for OCTEON TX2 are not supported in 32-bit mode.
Suggested-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The eventdev drivers have been hacking the deprecated field seqn for
internal test usage.
It is moved to a dynamic mbuf field in order to allow removal of seqn.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Replace master lcore with main lcore and
replace slave lcore with worker lcore.
Keep the old functions and macros but mark them as deprecated
for this release.
The "--master-lcore" command line option is also deprecated
and any usage will print a warning and use "--main-lcore"
as replacement.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
As discussed on the dpdk-dev mailing list[1], we can make some easy
improvements in standardizing the naming of the various components in DPDK,
and their associated feature-enabled macros.
Following this patch, each library will have the name in format,
'librte_<name>.so', and the macro indicating that library is enabled in the
build will have the form 'RTE_LIB_<NAME>'.
Similarly, for libraries, the equivalent name formats and macros are:
'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the
device type taken from the relevant driver subdirectory name, i.e. 'net',
'crypto' etc.
To avoid too many changes at once for end applications, the old macro names
will still be provided in the build in this release, but will be removed
subsequently.
[1] http://inbox.dpdk.org/dev/ef7c1a87-79ab-e405-4202-39b7ad6b0c71@solarflare.com/t/#u
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Since each version map file is contained in the subdirectory of the library
it refers to, there is no need to include the library name in the filename.
This makes things simpler in case of library renaming.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
This commit implements the eventdev ABI changes required by
the DLB/DLB2 PMDs. Several data structures and constants are modified
or added in this patch, thereby requiring modifications to the
dependent apps and examples.
The DLB/DLB2 hardware does not conform exactly to the eventdev interface.
1) It has a limit on the number of queues that may be linked to a port.
2) Some ports a further restricted to a maximum of 1 linked queue.
3) DLB does not have the ability to carry the flow_id as part
of the event (QE) payload. Note that the DLB2 hardware is capable of
carrying the flow_id.
Following is a detailed description of the changes that have been made.
1) Add new fields to the rte_event_dev_info struct. These fields allow
the device to advertise its capabilities so that applications can take
the appropriate actions based on those capabilities.
struct rte_event_dev_info {
uint32_t max_event_port_links;
/**< Maximum number of queues that can be linked to a single event
* port by this device.
*/
uint8_t max_single_link_event_port_queue_pairs;
/**< Maximum number of event ports and queues that are optimized for
* (and only capable of) single-link configurations supported by this
* device. These ports and queues are not accounted for in
* max_event_ports or max_event_queues.
*/
}
2) Add a new field to the rte_event_dev_config struct. This field allows
the application to specify how many of its ports are limited to a single
link, or will be used in single link mode.
/** Event device configuration structure */
struct rte_event_dev_config {
uint8_t nb_single_link_event_port_queues;
/**< Number of event ports and queues that will be singly-linked to
* each other. These are a subset of the overall event ports and
* queues; this value cannot exceed *nb_event_ports* or
* *nb_event_queues*. If the device has ports and queues that are
* optimized for single-link usage, this field is a hint for how many
* to allocate; otherwise, regular event ports and queues can be used.
*/
}
3) Replace the dedicated implicit_release_disabled field with a bit field
of explicit port capabilities. The implicit_release_disable functionality
is assigned to one bit, and a port-is-single-link-only attribute is
assigned to other, with the remaining bits available for future assignment.
* Event port configuration bitmap flags */
#define RTE_EVENT_PORT_CFG_DISABLE_IMPL_REL (1ULL << 0)
/**< Configure the port not to release outstanding events in
* rte_event_dev_dequeue_burst(). If set, all events received through
* the port must be explicitly released with RTE_EVENT_OP_RELEASE or
* RTE_EVENT_OP_FORWARD. Must be unset if the device is not
* RTE_EVENT_DEV_CAP_IMPLICIT_RELEASE_DISABLE capable.
*/
#define RTE_EVENT_PORT_CFG_SINGLE_LINK (1ULL << 1)
/**< This event port links only to a single event queue.
*
* @see rte_event_port_setup(), rte_event_port_link()
*/
#define RTE_EVENT_PORT_ATTR_IMPLICIT_RELEASE_DISABLE 3
/**
* The implicit release disable attribute of the port
*/
struct rte_event_port_conf {
uint32_t event_port_cfg;
/**< Port cfg flags(EVENT_PORT_CFG_) */
}
This patch also removes the depreciation notice and announce
the new eventdev ABI changes in release note.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Issue has been observed in case of multi segments where mbuf
data gets corrupted due to missing barriers. Changes made to
mbuf just before LMTST by one core gets updatded when the
same mbuf is in use by another core, leading to corruption.
It should be ensured that all changes made to mbuf should be
written before LMTST.
Fixes: cbd5710db4 ("net/octeontx2: add Tx multi segment version")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Improve single flow performance by moving the point of coherence
to the end of transmit sequence.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add SWTAG flush operation at the end of transmit sequence to
immediately release the tag held by the core.
Reuse Tag address to check SWTAG completion status.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
In the op new mode of crypto adapter, the completed crypto operation
is submitted to the event device by the OCTEON TX2 crypto PMD.
During event device dequeue the result of crypto operation is checked.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The crypto adapter callback functions and associated data structures
are added.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Since the 20.08 release deprecated rte_cio_*mb APIs because these APIs
provide the same functionality as rte_io_*mb APIs on all platforms, so
remove them and use rte_io_*mb instead.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
When event device is transmitting packet on OCTEONTX2 it needs to access
the destined ethernet device TXq data.
Currently, we get the TXq data through rte_eth_devices global array.
Instead save the TXq address inside event port memory.
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
In OCTEONTX2 event device we use sub_event_type to store the ethernet
port identifier when we receive work from OCTEONTX2 ethernet device.
This violates the event device spec as sub_event_type should be 0 in
the initial receive stage.
Set sub_event_type to 0 after copying the port id.
Fixes: 0fe4accd8e ("event/octeontx2: add Rx adapter fastpath ops")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
When event device is re-configured maintain the event queue to event port
links and event port status instead of resetting them.
Fixes: cd24e70258 ("event/octeontx2: add device configure function")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add device arguments to lock NPA aura and pool contexts in NDC cache.
The device args take hexadecimal bitmask where each bit represent the
corresponding aura/pool id.
Example:
-w 0002:02:00.0,npa_lock_mask=0xf // Lock first 4 aura/pool ctx
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Can be reproduced with "make EXTRA_CFLAGS='-O1'" command using
gcc 7.3.0
Build error
In file included from .../drivers/event/octeontx2/ot
x2_evdev.c:15:0:
.../drivers/event/octeontx2/otx2_evdev_stats.h:
In function ‘otx2_sso_xstats_get’:
.../drivers/event/octeontx2/otx2_evdev_stats.h:124:9:
error: ‘xstats’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
xstat = &xstats[ids[i] - start_offset];
~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is false positive, 'xstats_mode_count' should be preventing taking
the loop and accessing 'xstats'.
Returning in that case to silence the compiler warning.
Reported-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When eth port queue is removed from Rx adapter using
rte_event_eth_rx_adapter_queue_del() it incorrectly
initializes CQ context instead of modifying it. This
might lead to a crash when CQ context is modified
as a part of rte_eth_dev_stop() sequence as CQ will
hold invalid entries. This is responsibility of an
application to call rte_event_eth_rx_adapter_queue_del()
to remove eth port queue from Rx adapter in tear down
sequence.
Fixes: 37720fc1fb ("event/octeontx2: add Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add libatomic as a global dependency when compiling for 32-bit using
clang. As we need libatomic for 64-bit atomic ops.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Use c11 atomics with RELAXED ordering instead of rte_atomic ops which
enforce unnessary barriers on arm64.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Each workslot is always bound to a specific lcore there is no multi-core
contention to cause cache trashing as a result it is safe to remove the
WFE. Also, in dual workslot dequeue work will mostlikely be available on
the pair workslot making WFE impractical.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Added new flag for SECURITY in compiler optimized Tx fastpath
framework. With this, compiler autogenerates functions which
have security enabled.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
