Fix the mbuf offload flags namespace by adding an RTE_ prefix to the
name. The old flags remain usable, but a deprecation warning is issued
at compilation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
The flags PKT_TX_VLAN_PKT and PKT_TX_QINQ_PKT are
marked as deprecated since commit 380a7aab1a ("mbuf: rename deprecated
VLAN flags") (2017). But they were not using the RTE_DEPRECATED
macro, because it did not exist at this time. Add it, and replace
usage of these flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
After DEV_RX_OFFLOAD_JUMBO_FRAME flag removed, drivers give jumbo frame
decisions based on MTU value checks, but some of the checks were wrong
by mistake, causing device initialization to fail, fixing them.
Fixes: b563c14212 ("ethdev: remove jumbo offload flag")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Yu Jiang <yux.jiang@intel.com>
Commit 1bb4a528c4 ("ethdev: fix max Rx packet length") clarified the
expected usage of the max_rx_pktlen and max_mtu values and implemented
some extra checks on these values to ensure they are sane. After this,
the AF_XDP PMD fails to initialise. The value for max_rx_pktlen which
represents the max size of the Ethernet frame was set to ETH_FRAME_LEN
(1514) and the max_mtu which represents the size of the payload was set
to the max size of the Ethernet frame. This did not make sense, as
naturally the maximum frame size should be greater than the payload
size.
Fix this by setting the max_rx_pktlen equal to the max size of the
Ethernet frame as expected, and the max MTU equal to the max_rx_pktlen
less the overhead which is set to the size of an Ethernet header plus
CRC.
Fixes: 1bb4a528c4 ("ethdev: fix max Rx packet length")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Current, the max waiting time for MBX response is 500ms, but in
some scenarios, it is not enough. Since it depends on the response
of the kernel mode driver, and its response time is related to the
scheduling of the system. In this special scenario, most of the
cores are isolated, and only a few cores are used for system
scheduling. When a large number of services are started, the
scheduling of the system will be very busy, and the reply of the
mbx message will time out, which will cause our PMD initialization
to fail.
This patch add a runtime config to set the max wait time. For the
above scenes, users can adjust the waiting time to a suitable value
by themselves.
Fixes: 463e748964 ("net/hns3: support mailbox")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch adds support for rte flow action type port_id to
enable directing packets from an input port PF to an output
port which is a VF of the input port PF.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Vhost will update desc’s Buffer ID advance to next used descriptor when
VIRTIO_F_IN_ORDER feature negotiated. When virtio reuses the descriptor,
the Buffer ID should be restored even VIRTQ_DESC_F_INDIRECT
feature negotiated.
Fixes: b473061b0e ("net/virtio: fix indirect descriptors in packed datapaths")
Cc: stable@dpdk.org
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Signed-off-by: Yong Liu <yong.liu@intel.com>
Signed-off-by: Miao Li <miao.li@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
To improve performance in vhost Tx/Rx, merge vhost stats loop.
eth_vhost_tx has 2 loop of send num iteraion.
It can be merge into one.
eth_vhost_rx has the same issue as Tx.
Signed-off-by: Gaoxiang Liu <liugaoxiang@huawei.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add initialization for packed ring indirect descriptors
in reconnection path.
Fixes: 381f39ebb7 ("net/virtio: fix packed ring indirect descricptors setup")
Cc: stable@dpdk.org
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tx prepare method calls rte_net_intel_cksum_prepare(), which
handles tunnel packets correctly, but Tx burst path does not
take tunnel presence into account when computing the offsets.
Fixes: 58169a9c81 ("net/virtio: support Tx checksum offload")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
If packed ring size is not power of two, it is possible that remained
number less than one batch and meanwhile batch operation can pass.
This will cause incorrect remained number calculation and then lead to
receiving oversized packets. The patch fixed the issue by added
remained number check before batch operation.
Fixes: 77d66da838 ("net/virtio: add vectorized packed ring Rx")
Cc: stable@dpdk.org
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch fixes the wrong way to obtain virtqueue.
The end of virtqueue cannot be judged based on whether
the array is NULL.
Fixes: 4e8169eb0d ("net/virtio: fix Rx scatter offload")
Cc: stable@dpdk.org
Signed-off-by: Zhihong Peng <zhihongx.peng@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
After DCF commits TM hierarchy configuration, the commit flag is set to
avoid duplicated commit. But the flag is not reset after device stop,
which prevents the update of hierarchy configuration unless close the
device. It is not reasonable. This patch fix to reset the commit flag
after device stop. Then users can delete and add nodes to commit a new
TM hierarchy configuration.
Fixes: 3a6bfc37ea ("net/ice: support QoS config VF bandwidth in DCF")
Cc: stable@dpdk.org
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch enables building the e1000 driver for Windows.
I tested using two Windows VM on top of VMware Fusion,
creating two e1000 devices with device ID 0x10D3 (8274L),
verifying rx/tx works correctly using dpdk-testpmd.exe
rxonly and txonly mode.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
Tested-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
On a VMware ESXi 6.0 setup with an Intel 82599 NIC the ports don't
seem to initialize anymore, while running testpmd.
Configuring Port 0 (socket 0)
ixgbevf_dev_rx_init(): Set max packet length to 1518 failed.
ixgbevf_dev_start(): Unable to initialize RX hardware (-22)
Fail to start port 0: Invalid argument
Configuring Port 1 (socket 0)
ixgbevf_dev_rx_init(): Set max packet length to 1518 failed.
ixgbevf_dev_start(): Unable to initialize RX hardware (-22)
Fail to start port 1: Invalid argument
Please stop the ports first
If the call to ixgbevf_rlpml_set_vf fails and we return prematurely,
we will not be able to initialize the ports correctly.
The behavior seems to have changed since the following commit:
Fixes: c77866a169 ("net/ixgbe: detect failed VF MTU set")
Cc: stable@dpdk.org
We can make this particular use case work correctly if we don't
return an error, which seems to be consistent with the overall
kernel ixgbevf implementation.
[1]
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c?h=v5.14#n2015
Signed-off-by: Tudor Cornea <tudor.cornea@gmail.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Previously, we set txq affinity to 0 and let firmware
to perform round-robin when bonding. Firmware uses a
global counter to assign txq affinity to different
physical ports accord to remainder after division.
There are three dis-advantages:
1. The global counter is shared between kernel and dpdk.
2. After restarting pmd or port, the previous counter value
is reused, so the new affinity is unpredictable.
3. There is no way to get what affinity is set by firmware.
In this update, we will create several TISs up to the
number of bonding ports and bind each TIS to one PF port.
For each port, it will start to pick up TIS using its port
index. Upper layer application can quickly calculate each txq's
affinity without querying.
At DPDK layer, when creating txq with 2 bonding ports, the
affinity is set like:
port 0: 1-->2-->1-->2
port 1: 2-->1-->2-->1
port 2: 1-->2-->1-->2
Note: Only applicable to DevX api.
This affinity subjects to HW hash.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
MLX5 PMD exposes a socket for external tools to dump port state.
Socket events are listened using an interrupt source of EXT type.
The socket was closed and the interrupt callback was unregistered
at program exit, which is incorrect because DPDK could be already
shut down at this point. Move actions performed at program exit
to the moment the last MLX5 port is closed. The socket will be opened
again if later a new MLX5 device is plugged in and probed.
Also fix comments that were decisively talking
about secondary processes instead of external tools.
Fixes: e6cdc54cc0 ("net/mlx5: add socket server for external tools")
Cc: stable@dpdk.org
Reported-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
mlx5_rxq_start() allocates rxq_ctrl->obj and frees it on failure,
but did not set it to NULL. Later mlx5_rxq_release() could not recognize
this object is already freed and attempted to release its resources,
resulting in a crash:
Configuring Port 0 (socket 0)
mlx5_common: Failed to create RQ using DevX
mlx5_common: Can't create DevX RQ object.
mlx5_net: Port 0 Rx queue 0 RQ creation failure.
Segmentation fault
Set rxq_ctrl->obj to NULL after it is freed to skip resource release.
Fixes: 1260a87b28 ("net/mlx5: share Rx control code")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The RSS configuration in a policy action container was a pointer
inside a union, and the pointer area could be used as other fate
action. In the current implementation, the RSS of the green color
was prior to that of the yellow color. There was a high possibility
the pointer was considered as the RSS and result in a error flow
expansion when only the yellow color had the RSS action.
The check of the fate action type should also be done to get rid of
the misjudgment.
Fixes: b38a12272b ("net/mlx5: split meter color policy handling")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Verbs API doesn't support device port number larger than 255 by design.
To support more VF or SubFunction port representors, forces DevX API
check when max Verbs device link ports larger than 255.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Verbs API does not support Infiniband device port number larger 255 by
design. To support more representors on a single Infiniband device DevX
API should be engaged.
While creating Send Queue (SQ) object with Verbs API, the PMD assigned
IB device port attribute and kernel created the default miss flows in
FDB domain, to redirect egress traffic from the queue being created to
representor appropriate peer (wire, HPF, VF or SF).
With DevX API there is no IB-device port attribute (it is merely kernel
one, DevX operates in PRM terms) and PMD must create default miss flows
in FDB explicitly. PMD did not provide this and using DevX API for
E-Switch configurations was disabled.
The default miss FDB flow matches E-Switch manager vport (to make sure
the source is some representor) and SQn (Send Queue number - device
internal queue index). The root flow table managed by kernel/firmware
and it does not support vport redirect action, we have to split the
default miss flow into two ones:
- flow with lowest priority in the root table that matches E-Switch
manager vport ID and jump to group 1.
- flow in group 1 that matches E-Switch manager vport ID and SQn and
forwards packet to peer vport
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
When creating internal transfer flow on root table with lowest
priority, the flow was created with max UINT32_MAX priority. It is wrong
since the flow is created in kernel and max priority supported is 16.
This patch fixes this by adding internal flow check.
Fixes: 5f8ae44dd4 ("net/mlx5: enlarge maximal flow priority")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Extends txq flow pattern to support both hairpin and regular txq.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
For egress packet on representor, the vport ID in transport domain
is E-Switch manager vport ID since representor shares resources of
E-Switch manager. E-Switch manager vport ID and Tx queue internal device
index are used to match representor egress packet.
This patch adds flow item port ID match on E-Switch manager.
E-Switch manager vport ID is 0xfffe on BlueField, 0 otherwise.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
To detect number flow Verbs flow priorities, PMD try to create Verbs
flows in different priority. While Verbs is not designed to support
ports larger than 255.
When DevX supported by kernel driver, 16 Verbs priorities must be
supported, no need to create Verbs flows.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
IB spec doesn't allow 255 ports on a single HCA, port number of 256 was
cast to u8 value 0 which invalid to ibv_query_port()
This patch invokes Netlink API to query port state when port number
greater than 255.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add support for PPP over L2TPv2 over UDP protocol RSS Hash based
on inner IP src/dst address and TCP/UDP src/dst port.
Patterns are listed below:
eth/ipv4(6)/udp/l2tpv2/ppp/ipv4(6)
eth/ipv4(6)/udp/l2tpv2/ppp/ipv4(6)/udp
eth/ipv4(6)/udp/l2tpv2/ppp/ipv4(6)/tcp
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
CNF10KA does not differ it terms of RVU resources from
CN10KA platform hence add it to list of devices respective
drivers support.
Otherwise devices on CNF10KA are not probed even though
compatible drivers exist.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Expand the use of mempool registration to MR management for other
drivers.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Since MR management has moved to the common area, there is no longer a
need for the DMA map and unmap function for each driver.
This patch share those functions. For most drivers it supports these
operations for the first time.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add global shared MR cache as a field of common device structure.
Move MR management to use this global cache for all drivers.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add function for global shared MR cache structure initialization.
This function include:
- btree initialization.
- set callbacks for reg and dereg MR.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add function for MR control structure initialization.
This function include:
- btree initialization.
- dev_gen_ptr initialization.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This patch remove two redundant things from MR file:
1. mr_find_contig_memsegs_data structure which is moved to common file
before.
2. External memory mechanism - mlx5_tx_update_ext_mp function.
Since commit [1] which added support for DMA map and unmap, external
mem must be configured by the user using rte_mem_map function and no
need to handle this in pmd.
[1]
commit 989e999d93
("net/mlx5: support PCI device DMA map and unmap")
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add HCA attributes structure as a field of device config structure.
It query in common probing, and updates the timestamp format fields.
Each driver use HCA attributes from common device config structure,
instead of query it for itself.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Create shared Protection Domain in common area and add it and its PDN as
fields of common device structure.
Use this Protection Domain in all drivers and remove the PD and PDN
fields from their private structure.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Create shared context device in common area and add it as a field of
common device.
Use this context device in all drivers and remove the ctx field from
their private structure.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Device configure structure has flag named devx as same as SH structure
with the same meaning.
Remove the flag from the configuration structure and move all the
usages to the SH flag.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add device configure structure and function to parse user device
arguments into it.
Move parsing and management of relevant device arguments to common.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Create MACRO definitions file in the common driver as preparation for MR
and basic probe sharing.
Move relevant definitions from the net driver to the above file.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Create common probing structure that includes, for now, basic probing
information detected by the common driver and share it with all the
internal drivers.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
In device initialization, the driver registers to free hugepages events.
When hugepage is released, this callback frees all its related MRs.
In Windows initialization, this callback is not registered what may
cause to use invalid memory.
This patch adds memory event callback registration in Windows
initialization.
Fixes: 980826dc6f ("net/mlx5: probe on Windows")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Sideband queue need to be initialized when device is initialized.
Otherwise the calling to function "ice_init_ctrlq" may fail.
This patch fixes it.
Fixes: 97f4f78bbd ("net/ice/base: add functions for device clock control")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Meters are configured per flow using rte_flow_create API.
Patch adds support for destroy operation for meter action
applied on the flow.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Meters are configured per flow using rte_flow_create API.
Implement support for meter action applied on the flow.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
