Setting MTU bigger than RTE_ETHER_MTU requires the jumbo frame support,
and application should enable the jumbo frame offload support for it.
When jumbo frame offload is not enabled by application, but MTU bigger
than RTE_ETHER_MTU is requested there are two options, either fail or
enable jumbo frame offload implicitly.
Enabling jumbo frame offload implicitly is selected by many drivers
since setting a big MTU value already implies it, and this increases
usability.
This patch moves this logic from drivers to the library, both to reduce
the duplicated code in the drivers and to make behaviour more visible.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
There is a confusion on setting max Rx packet length, this patch aims to
clarify it.
'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.
Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.
These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.
Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.
As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.
For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.
When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.
Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Some drivers do not provide per-queue statistics. So, there is no point
to have these misleading zeros in xstats.
Fixes: f30e69b41f ("ethdev: add device flag to bypass auto-filled queue xstats")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently majority of fast-path ethdev ops take pointers to internal
queue data structures as an input parameter.
While eth_rx_queue_count() takes a pointer to rte_eth_dev and queue
index.
For future work to hide rte_eth_devices[] and friends it would be
plausible to unify parameters list of all fast-path ethdev ops.
This patch changes eth_rx_queue_count() to accept pointer to internal
queue data as input parameter.
While this change is transparent to user, it still counts as an ABI change,
as eth_rx_queue_count_t is used by ethdev public inline function
rte_eth_rx_queue_count().
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
Some drivers don't need Rx and Tx queue release callback, make them
optional. Clean up empty queue release callbacks for some drivers.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Adjust parameters order to eth_xstats_get_by_id_t prototype.
Make ids the second parameter similar to eth_xstats_get_by_id_t.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds comment to explain how dpaa_port_fmc_ccnode_parse
function is working to get the HW queue from FMC policy file
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower case
MAC address, the user may need to make a change in
such test case after this patch.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Start a new release cycle with empty release notes.
The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Add check for the PCD queue from the kernel interface
for default and error queues.
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch fixes providing the correct headroom size when
VSP is enabled.
Fixes: e4abd4ff18 ("net/dpaa: support virtual storage profile")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fixes a few different things:
* Remove 'fw_version' NULL checks, it is allowed if the 'fw_size' is
zero, 'fw_version' being NULL but 'fw_size' not zero condition checked
in ethdev layer
* Be sure required buffer size is returned if provided one is not big
enough, instead of returning success (0)
* Document in doxygen comment the '-EINVAL' is a valid return type
* Take into account that 'snprintf' can return negative value
* Cast length to 'size_t' to compare it with 'fw_size'
Fixes: bb42aa9ffe ("net/atlantic: configure device start/stop")
Fixes: ff70acdf42 ("net/axgbe: support reading FW version")
Fixes: e2652b0a20 ("net/bnxt: support get FW version")
Fixes: cf0fab1d2c ("net/dpaa: support firmware version get API")
Fixes: 748eccb97c ("net/dpaa2: add support for firmware version get")
Fixes: b883c0644a ("net/e1000: add firmware version get")
Fixes: 293430677e ("net/enic: add handler to return firmware version")
Fixes: 1f5ca0b460 ("net/hns3: support some device operations")
Fixes: bd5b86732b ("net/hns3: modify format for firmware version")
Fixes: ed0dfdd0e9 ("net/i40e: add firmware version get")
Fixes: e31cb9a362 ("net/ice: support FW version getting")
Fixes: 4f09bc55ac ("net/igc: implement device base operations")
Fixes: eec10fb0ce ("net/ionic: support FW version")
Fixes: 8b0b565742 ("net/ixgbe: add firmware version get")
Fixes: 4d9f5b8adc ("net/octeontx2: add FW version get operation")
Fixes: f97b56f9f1 ("net/qede: support FW version query")
Fixes: 83fef46a22 ("net/sfc: add callback to retrieve FW version")
Fixes: bc84ac0fad ("net/txgbe: support getting FW version")
Fixes: 2191347120 ("ethdev: add firmware version get")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Acked-by: Jiawen Wu <jiawenwu@trustnetic.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The current driver only support single buffer pool on a given
PMD instance. Return error, if trying to configure more.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
CGR are automatically freed up in the kernel. As we do not cleanup
the queues, if we release the CGR here, kernel reports them in use.
So have them freed up in the kernel.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
According to DPDK Documentation, rte_eth_link_get API can wait up to 9
seconds for auto-negotiation to finish and then returns link status.
In current implementation of rte_eth_link_get API in DPAA drivers, it
was not waiting for auto negotiation to finish and was returning link
status DOWN
It can cause issues with DPDK applications which relies
on rte_eth_link_get API for link statusand does not support link status
interrupt.
This patch fixes this bug by adding wait for up to 9 seconds for auto
negotiation to finish.
Fixes: 2aa10990a8 ("bus/dpaa: enable link state interrupt")
Cc: stable@dpdk.org
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports VLAN tag.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.
Fixes: 25f854197a ("net/dpaa: support jumbo frames")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reasons for building not supported generally start with lowercase
because printed as the second part of a line.
Other changes:
- "linux" should be "Linux" with a capital letter.
- ARCH_X86_64 may be simply x86_64.
- aarch64 is preferred over arm64.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The dpaa drivers have been hacking the deprecated field seqn for
internal features.
It is moved to a dynamic mbuf field in order to allow removal of seqn.
Signed-off-by: David Marchand <david.marchand@redhat.com>
A lot of drivers export headers, reproduce the same facility than for
libraries.
Note: this change fixes an issue with the crypto scheduler headers which
were not installed properly. A separate backport will be sent to stable
branches.
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Since each version map file is contained in the subdirectory of the library
it refers to, there is no need to include the library name in the filename.
This makes things simpler in case of library renaming.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Queue stats are stored in 'struct rte_eth_stats' as array and array size
is defined by 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag.
As a result of technical board discussion, decided to remove the queue
statistics from 'struct rte_eth_stats' in the long term.
Instead PMDs should represent the queue statistics via xstats, this
gives more flexibility on the number of the queues supported.
Currently queue stats in the xstats are filled by ethdev layer, using
some basic stats, when queue stats removed from basic stats the
responsibility to fill the relevant xstats will be pushed to the PMDs.
During the switch period, temporary 'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS'
device flag is created. Initially all PMDs using xstats set this flag.
The PMDs implemented queue stats in the xstats should clear the flag.
When all PMDs switch to the xstats for the queue stats, queue stats
related fields from 'struct rte_eth_stats' will be removed, as well as
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' flag.
Later 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag also can be
removed.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change eth_dev_stop_t return value from void to int.
Make eth_dev_stop_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The function rte_eth_dev_release_port() is partially resetting
the struct rte_eth_dev. The drivers were completing this reset
with more pointers set to NULL in the close or remove operations.
More pointers are reset at ethdev level,
and some redundant assignments are removed from PMDs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When closing a port, it is supposed to be already stopped,
and marked as such with "dev_started" state zeroed by the stop API.
Resetting "dev_started" before calling the driver close operation
was hiding the case of not properly stopped port being closed.
The flag "dev_started" is not changed anymore in "rte_eth_dev_close()".
In case the "dev_stop" function is called from "dev_close",
bypassing "rte_eth_dev_stop()" API,
the "dev_started" state must be explicitly reset in the PMD
in order to keep the same behaviour.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch adds support to get/set link speed, duplex and
autoneg mode status from/to PHY. Enhance device capabilities
to advertise all supported link speeds according to mac type.
Also enables fallback support for get link status API where
kernel support is missing.
Signed-off-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Send error packets to main queue (rx) to make application
enable to receive error packets.
Earlier all packets with L3/L4 checksum errors were getting
dropped by the hardware.
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Enables a debugging queue to fetch error (Rx/Tx) packets
to user space. Earlier all packets with L3/L4 checksum
errors were getting dropped by the hardware.
Setting CONFIG_RTE_LIBRTE_DPAA_DEBUG_DRIVER=y is required
which enables following enhancements.
1) Enable TX/RX error queues to check the errors packet.
2) Display error frame information(payload, status, paresr result).
3) Send error packets to application
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
The temporary flag RTE_ETH_DEV_CLOSE_REMOVE is removed.
It was introduced in DPDK 18.11 in order to give time for PMDs to migrate.
The old behaviour was to free only queues when closing a port.
The new behaviour is calling rte_eth_dev_release_port() which does
three more tasks:
- trigger event callback
- reset state and few pointers
- free all generic port resources
The private port resources must be released in the .dev_close callback.
The .remove callback should:
- call .dev_close callback
- call rte_eth_dev_release_port()
- free multi-port device shared resources
Despite waiting two years, some drivers have not migrated,
so they may hit issues with the incompatible new behaviour.
After sending emails, adding logs, and announcing the deprecation,
the only last solution is to declare these drivers as unmaintained:
ionic, liquidio, nfp
Below is a summary of what to implement in those drivers.
* The freeing of private port resources must be moved
from the ".remove(device)" function to the ".dev_close(port)" function.
* If a generic resource (.mac_addrs or .hash_mac_addrs) cannot be freed,
it must be set to NULL in ".dev_close" function to protect from
subsequent rte_eth_dev_release_port() freeing.
* Note 1:
The generic resources are freed in rte_eth_dev_release_port(),
after ".dev_close" is called in rte_eth_dev_close(), but not when
calling ".dev_close" directly from the ".remove" PMD function.
That's why rte_eth_dev_release_port() must still be called explicitly
from ".remove(device)" after calling the ".dev_close" PMD function.
* Note 2:
If a device can have multiple ports, the common resources must be freed
only in the ".remove(device)" function.
* Note 3:
The port is supposed to be in a stopped state when it is closed.
If it is not the case, it is free to the PMD implementation
how to react when trying to close a non-stopped port:
either try to stop it automatically or just return an error.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
With removal of old close behavior, the private
port resources must be released in the .dev_close callback.
Freeing of port private resources is moved from
the ".remove(device)" to the ".dev_close(port)" operation
Signed-off-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The device operation .dev_close was returning void.
This driver interface is changed to return an int.
Note that the API rte_eth_dev_close() is still returning void,
although a deprecation notice is pending to change it as well.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Updating the type for 'port' variable from 'uint8_t' to 'uint16_t'.
Fixes: 8c3495f5d2 ("net/dpaa: support loopback API")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
'_rte_eth_dev_callback_process()' & '_rte_eth_dev_reset()' internal APIs
has unconventional underscore ('_') prefix.
Although this is not documented most probably this is to mark them as
internal. Since we have '__rte_internal' flag to mark this, removing '_'
from API names.
For '_rte_eth_dev_reset()', there is already a public API named
'rte_eth_dev_reset()', so renaming '_rte_eth_dev_reset()' to
'rte_eth_dev_internal_reset'.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
This patch is a preparation to hide the 'struct eth_dev_ops' from
applications by moving some device operations from 'struct eth_dev_ops'
to 'struct rte_eth_dev'.
Mentioned ethdev APIs are in the data path and implemented as inline
because of performance reasons.
Exposing 'struct eth_dev_ops' to applications is bad because it is a
contract between ethdev and PMDs, not really needs to be known by
applications, also changes in the struct causing ABI breakages which
shouldn't.
To be able to both keep APIs inline and hide the 'struct eth_dev_ops',
moving device operations used in ethdev inline APIs to 'struct
rte_eth_dev' to the same level with Rx/Tx burst functions.
The list of dev_ops moved:
eth_rx_queue_count_t rx_queue_count;
eth_rx_descriptor_done_t rx_descriptor_done;
eth_rx_descriptor_status_t rx_descriptor_status;
eth_tx_descriptor_status_t tx_descriptor_status;
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
With fmlib (FMCLESS) mode now RSS can be modified on runtime.
This patch add support for RSS update functions
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
FMC tool generates and saves the setup in a file.
This patch help Parse the /tmp/fmc.bin generated by FMC to
setup RXQs for each port on FMC mode.
The parser gets the fqids and vspids from fmc.bin
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds support for Virtual Storage profile (VSP) feature.
With VSP support when memory pool is created, the hw buffer pool id
i.e. bpid is not allocated; the bpid is identified by dpaa flow
create API.
The memory pool of RX queue is attached to specific BMan pool
according to the VSP ID when RX queue is setup.
For fmlib based hash queue, VSP base ID is assigned to each queue.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
A shared MAC interface is an interface which can be used
by both kernel and userspace based on classification configuration
It is defined in dts with the compatible string
"fsl,dpa-ethernet-shared" which bpool will be seeded by the dpdk
partition and configured as a netdev by the dpaa Linux eth driver.
User space buffers from the bpool will be kmapped by the kernel.
Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com>
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch uses fmlib to configure the FMAN HW for flow
and distribution configuration, thus avoiding the need
for static FMC tool execution optionally.
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds support for VSP (Virtual Storage Profile)
in fmlib routines.
VSP allow a network interface to be divided into physical
and virtual instance(s).
The concept is very similar to SRIOV.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPAA platorm MAC interface is known as FMAN i.e. Frame Manager.
There are two ways to control it.
1. Statically configure the queues and classification rules before the
start of the application using FMC tool.
2. Dynamically configure it within application by making API calls of
fmlib.
The fmlib or Frame Manager library provides an API on top of the
Frame Manager driver ioctl calls, that provides a user space application
with a simple way to configure driver parameters and PCD
(parse - classify - distribute) rules.
This patch integrates the base fmlib so that various queue config, RSS
and classification related features can be supported on DPAA platform.
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
