Currently, the VF mailbox synchronization communication is based on
three fields: head/tail/lost, when head equals tail plus lost, it
means the response is received successfully.
The head field indicates the number of requests that are successfully
sent. If the request sending fails, it should not be updated.
This patch fix the above bug by roll back updates when the sending
fails.
Fixes: 463e748964 ("net/hns3: support mailbox")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
User could create flow rules with specified counter by the action of
RTE_FLOW_ACTION_TYPE_COUNT, but the counter may retain the original
value when create.
This patch fix the bug by read the counter when creating the rule
because the counter is read-clear.
Fixes: fcba820d9b ("net/hns3: support flow director")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
In multi-TC scenarios, MAC pause is not supported. Otherwise, only
TC0 can trigger pause frames, and other TCs cannot trigger pause
frames. In this case, flow control does not meet the expectation.
Fixes: 62e3ccc2b9 ("net/hns3: support flow control")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently, three hardware operations are involved in setting the PVID.
If any operation fails, a failure will be returned. And there may be
residual hardware configurations because no rollback is performed.
This patch adds rollback operation for setting PVID to avoid residual
hardware configuration after the PVID fails to be configured.
Fixes: 411d23b9ea ("net/hns3: support VLAN")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
When FLR occurs, the head pointer register of
the command queue will be cleared, resulting in
abnormal detection of the head pointer register
of the command queue. At present, FLR is detected
in this way, and the reset recovery process is
executed.
However, when FLR occurs, the header pointer
register of the command queue is not necessarily
abnormal. For example, when the driver runs
normally, the value of the header pointer register
of the command queue may also be 0, which will
lead to the miss detection of FLR.
Therefore, the judgment that whether the base
address register of command queue is 0 is added
to ensure that FLR not miss detection.
Fixes: 2790c64647 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
When start testpmd with two hns3 VFs(0000:bd:01.0, 0000:bd:01.7), and
then execute the following commands:
testpmd> create bonded device 1 0
testpmd> set bonding mac_addr 2 3c:12:34:56:78:9a
testpmd> add bonding slave 0 2
testpmd> add bonding slave 1 2
testpmd> set portmask 0x4
testpmd> port start 2
It will occurs the following error in a low probability:
0000:bd:01.0 hns3_get_mbx_resp(): VF could not get mbx(3,0)
head(16) tail(15) lost(1) from PF in_irq:0
0000:bd:01.0 hns3vf_set_default_mac_addr(): Failed to set mac
addr(3C:**:**:**:78:9A) for vf: -62
mac_address_slaves_update(1541) - Failed to update port Id 0
MAC address
The problem replay:
1. The 'port start 2' command will start slave ports and then set slave
mac address, the function call flow: bond_ethdev_start ->
mac_address_slaves_update.
2. There are also a monitor task which running in intr thread will check
slave ports link status and update slave ports mac address, the
function call flow: bond_ethdev_slave_link_status_change_monitor ->
bond_ethdev_lsc_event_callback -> mac_address_slaves_update.
3. Because the above step1&2 running on different threads, they may both
call drivers ops mac_addr_set which is hns3vf_set_default_mac_addr.
4. hns3vf_set_default_mac_addr will first acquire hw.lock and then send
mailbox to PF and wait PF's response message. Note: the PF's
response is an independent message which will received in hw.cmq.crq,
the receiving operation can only performed in intr thread.
5. So if the step1 operation hold the hw.lock and try get response
message, and step2 operation try acquire the hw.lock and so it can't
process the response message, this will lead to step1 fail.
The solution:
1. make all threads could process the mailbox response message, which
protected by the hw.cmq.crq.lock.
2. use the following rules to avoid deadlock:
2.1. ensure use the correct locking sequence: hw.lock >
hw.mbx_resp.lock > hw.cmq.crq.lock.
2.2. make sure don't acquire such as hw.lock & hw.mbx_resp.lock again
when process mailbox response message.
Fixes: 463e748964 ("net/hns3: support mailbox")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
PHY is a common concept for the copper and optical media type interface.
There are some inappropriate function names for copper ports, which
needs to be adjusted.
Fixes: 2e4859f3b3 ("net/hns3: support PF device with copper PHYs")
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch updates copyright date for hns3 PMD files.
Fixes: 565829db8b ("net/hns3: add build and doc infrastructure")
Fixes: 952ebacce4 ("net/hns3: support SVE Rx")
Fixes: e31f123db0 ("net/hns3: support NEON Tx")
Fixes: c09c7847d8 ("net/hns3: support traffic management")
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Action port_id was not supported until now.
In this patch the action port_id supports passing from input
port PF to output port which is one of input port respective VF
Signed-off-by: Smadar Fuks <smadarf@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
There are two APIs in ethdev layer to get link status of device, namely,
"rte_eth_link_get" and "rte_eth_link_get_nowait". When the device link
is unstable or auto-negotiation is in progress, the first API supports
the function of waiting for the NIC to link up, and the maximum waiting
time is 9 seconds based on DPDK Documentation. For the hns3 PMD driver,
the link can be established within 2 seconds.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Fix the documentation about the MODIFY_FIELD flow action.
1. Include the rte_flow_field_id enumeration reference to point
to the full list of all supported Field IDs available.
2. Correct the formatting of the MODIFY_FIELD action and the
destination/source field definition tables.
Fixes: 73b68f4c54 ("ethdev: introduce generic modify flow action")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The PMD_DRV_LOG macro in netvsc (like other drivers) adds a newline to
the log message as part of the macro expansion; therefore the
message should not have its own newline.
In a couple places, log messages were split across source lines
which can make looking them up in the source tree harder.
Fixes: a2a23a794b ("net/netvsc: support VF device hot add/remove")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Long Li <longli@microsoft.com>
Add support for rte_flow_action_nvge_encap as a sample action.
The example of test-pmd command:
1. set nvgre ip-version ... tni ... ip-src ... ip-dst ...
set raw_encap 1 eth src... / ipv4... /...
set sample_actions 2 nvgre / port_id id 0 / end
flow create 0 ... pattern eth / end actions
sample ratio 1 index 2 / raw_encap index 1 / port_id id 0...
The flow will result in all the matched egress packets will be
encapsulated and sent to wire, and also mirrored the packets
using NVGRE encapsulation data and sent to wire.
Signed-off-by: Salem Sol <salems@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for rte_flow_action_vxlan_encap as a sample action.
The example of test-pmd command:
1. set vxlan ip-version ... vni ... udp-src ...
set raw_encap 1 eth src.../ ipv4.../...
set sample_actions 2 vxlan_encap / port_id id 0 / end
flow create 0 ... pattern eth / end actions
sample ratio 1 index 2 / raw_encap index 1 / port_id id 0...
The flow will result in all the matched egress packets will be
encapsulated and sent to wire, and also mirrored the packets
using VXLAN encapsulation data and sent to wire.
Signed-off-by: Salem Sol <salems@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for NVGRE encap as a sample action
and validate it.
Signed-off-by: Salem Sol <salems@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add support for VXLAN encap as a sample action
and validate it.
Signed-off-by: Salem Sol <salems@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
With the current code the VXLAN/NVGRE parsing routine
stored the configuration of the header on stack, this
might lead to overwriting the data on the stack.
Currently having VXLAN/NVGRE encap as sample actions
is done using RAW_ENCAP, for example:
1. set raw_encap 1 eth src.../ vxlan vni.../ ipv4.../ ...
set sample_actions 0 raw_encap / port_id id 0 / end
flow create 0 ... pattern eth / end actions
sample ration 1 index 0 / jump group 1 / end
The goal is to utilize the rte_flow_action_vxlan_encap
and rte_flow_action_nvgre_encap for sample actions.
This patch prepares storing the external data of vxlan and
nvgre encap into global data as a pre-step to supporting
vxlan and nvgre encap as a sample actions.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The validity verification of input parameters should be performed at
API layer, not in the PMD.
Fixes: 3a18c44b45 ("ethdev: add access to EEPROM")
Fixes: 40ff8b305a ("net/e1000: add module EEPROM callbacks for e1000")
Fixes: f2088e785c ("net/i40e: fix dereference before check when getting EEPROM")
Fixes: b74d0cd43e ("net/ixgbe: add module EEPROM callbacks for ixgbe")
Fixes: 8a6a09f853 ("net/mlx5: support reading module EEPROM data")
Fixes: 58f6f93c34 ("net/octeontx2: add module EEPROM dump")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
virtio_user_dev_server_reconnect() is typically called from the
interrupt context while checking the link state:
vhost_user_update_link_state()
--> virtio_user_dev_server_reconnect()
Under this conditions callback unregistering always fails. This means
that listenfd is never unregistered and continue to trigger interrupts.
For example, if second client will try to connect to the same socket,
the server will receive interrupts infinitely because it will not
accept them while listen fd is readable and generates epoll events.
Fix that by moving reconfiguration of interrupts out of the
interrupt context to alarm handler.
'virtio_user_dev_delayed_handler' renamed to
'virtio_user_dev_delayed_disconnect_handler' to better reflect its
purpose.
Additionally improved error logging around interrupt management.
Fixes: bd8f50a45d ("net/virtio-user: support server mode")
Cc: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
If vhost device's IOMMU feature is disabled, IOTLB mempool allocation
is unnecessary.
Reported-by: Peng He <hepeng.0320@bytedance.com>
Signed-off-by: Junjie Wan <wanjunjie@bytedance.com>
Reviewed-by: Zhihong Wang <wangzhihong.wzh@bytedance.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch fixes coverity issue in async enqueue function by adding
initialization step before using temporary virtio header.
Coverity issue: 366123
Fixes: cd6760da10 ("vhost: introduce async enqueue for split ring")
Cc: stable@dpdk.org
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
The "Unregistered with fw" message was being logged in a wrong function.
Moved it to the right place.
Fixes: a7dda7e0a0 ("net/bnxt: log port id in async events")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
While configuring LRO, driver should check the return value
of bnxt_hwrm_vnic_tpa_cfg() HWRM command and return error
when the FW command fails.
Fixes: 0958d8b643 ("net/bnxt: support LRO")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
During port start when bnxt_start_nic() fails, it tries to free
"intr_handle->intr_vec" but the variable is not set to NULL after that.
If port start fails, driver invokes bnxt_dev_stop() which will lead
to a double free of "intr_handle->intr_vec".
Fix it by removing the call to free "intr_handle->intr_vec" in the
bnxt_start_nic() failure path as it is anyway doing in bnxt_dev_stop().
Fixes: 9d276b439a ("net/bnxt: fix error handling in device start")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There are multiple branches in rdma-core library backing
the rte flows:
- Verbs
- Direct Verbs (DV)
- Direct Rules (DR)
The Verbs API always requires the specifying the queue even
if there is the drop action in the flow, though the kernel
optimizes out the actual queue usage for the flows containing
the drop action. The PMD handles the dedicated Rx queue to
provide Verbs API compatibility.
The DV/DR API does not require explicit specifying the queue
at the flow creation, but PMD still specified the dedicated
drop queue as action. It performed the packet forwarding to
the dummy queue (that was not polled at all) causing the
steering pipeline resources usage and degrading the overall
packet processing rate. For example, with inserted flow to
drop all the ingress packets the statistics reported only
15Mpps of 64B packets were received over 100Gbps line.
Since the Direct Rule API for E-Switch was introduced the
rdma-core supports the dedicated drop action, that is recognized
both for DV and DR and can be used for the entire device in
unified fashion, regardless of steering domain. The similar drop
action was introduced for E-Switch, the usage of this one can be
extended for other steering domains, not for E-Switch's one only.
This patch:
- renames esw_drop_action to dr_drop_action to emphasize
the global nature of the variable (not only E-Switch domain)
- specifies this global drop action instead of dedicated
drop queue for the DR/DV flows
Fixes: 34fa7c0268 ("net/mlx5: add drop action to Direct Verbs E-Switch")
Fixes: 65b3cd0dc3 ("net/mlx5: create global drop action")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The current define for MLX5_DRIVER_NAME refers specially for the PCI
driver.
The define itself does not mention PCI and this is confusing.
Rename from MLX5_DRIVER_NAME to MLX5_PCI_DRIVER_NAME.
Signed-off-by: Asaf Penso <asafp@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Some mlx5 PMDs define the log prefix as "mlx5_pmd" while others as
"pmd_mlx5".
The patch aligns all pmds to use the "mlx5_pmd" format.
Signed-off-by: Asaf Penso <asafp@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Shared RSS action create all supported RSS hash combination
in advance and lookup the right hash TIR when flow is actually
applied by comparing hash field value.
Unfortunately some hash combination is missed, for example,
UDP/TCP dest port only, L3-src-only, etc.
This patch add the missing hash combination.
In order to reduce the usage of pre-created TIRs and because
for one L3+L4 combination only one IBV hash type is possible,
for example, either IBV_RX_HASH_SRC_PORT_UDP or IBV_RX_HASH_DST_PORT_UDP
or both of them could be set so they can share same slot in
mlx5_rss_hash_fields, means only one TIR will be created.
Fixes: d2046c09aa ("net/mlx5: support shared action for RSS")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyu Min <jackmin@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The shared RSS action use the _tunnel_ information which is derived
from flow items to decide whether need to do inner RSS or not.
However, inner RSS should be decided by RSS level (>1) in configuration
and then to create TIR with 'IBV_RX_HASH_INNER' hash bit set.
Also, for one shared RSS action there is only one set of TIRs -
outer or inner could be so the unnecessary set of TIRs are removed
in order to reduce resource.
Fixes: d2046c09aa ("net/mlx5: support shared action for RSS")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyu Min <jackmin@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add support for VNI field in FDIR. Treat VXLAN flow type as
ICE_FLTR_PTYPE_NONF_IPV4_UDP_VXLAN to align with shared code. It
allows to match outer L2/L3, VNI and inner L2/L3 fields with VXLAN
pattern.
VNI takes 24 bits in VXLAN header, but uses 32 bits for matching in
shared code. The 8 bits reserved field adjacent should always be 0.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The configuration of FDIR input set should not be set
during flow validate. It should be set when flow create.
Fixes: fe5d0e85b7 ("net/i40e: fix flow director flex configuration")
Fixes: 15018d79f0 ("net/i40e: add FDIR support for GTP-C and GTP-U")
Cc: stable@dpdk.org
Signed-off-by: Murphy Yang <murphyx.yang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
In fpga_update_flash(), "smgr->rsu_length" is passed to a
parameter that cannot be negative. So return value of
function "lseek" should be checked before being assigned
to "smgr->rsu_length".
Coverity issue: 367481
Fixes: a05bd1b40b ("raw/ifpga: add FPGA RSU APIs")
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
In write_flash_image(), calling function "lseek" without checking
return value has risk. Negative return value should be handled as
an error condition.
Coverity issue: 367478
Fixes: a05bd1b40b ("raw/ifpga: add FPGA RSU APIs")
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Kernel driver 2.13.10 is removed, so update recommended matching list
for i40e.
Cc: stable@dpdk.org
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When the size of a packet in Rx channel is less than the minimum
or greater than the maximum, the packet will be simultaneously
counted by RLEC(Receive Length Error Count) and
RUC(Receive Under Size Count)/ROC(Receive Oversize Count) registers.
This patch fixes the issue of counting a length error packet twice
when counting the total number of received error packets.
Fixes: 70bdb18657 ("ethdev: add Rx error counters for missed, badcrc and badlen packets")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
When the size of a packet in Rx channel is less than the minimum
or greater than the maximum, the packet will be simultaneously
counted by RLEC(Receive Length Error Count) and
RUC(Receive Under Size Count)/ROC(Receive Oversize Count) registers.
This patch fixes the issue of counting a length error packet twice
when counting the total number of received error packets.
Fixes: e6defdfddc ("net/igc: enable statistics")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
When ena_tx_queue_release_bufs() frees the mbufs it does not clear
the mbuf pointers. So, when the device starts and stops multiple
times it can cause the application to receive duplicate mbufs for
two different packets. Fix the issue by clearing the mbuf pointer.
Also, while tracking down the "double free" issue the ena calls to
allocate and free mbufs in bulk were migrated to the mbuf based APIs
so the common mbuf alloc/free routines are exercised.
Fixes: 79405ee175 ("net/ena: fix out of order completion")
Fixes: 1173fca25a ("ena: add polling-mode driver")
Cc: stable@dpdk.org
Signed-off-by: David Harton <dharton@cisco.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Disable loading of external DDP package as it is not
supported on Windows.
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Jie Zhou <jizh@microsoft.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
- Add Intel ice PMD support on Windows.
- Remove #include sys/ioctl header file as it is not needed.
- Replace x86intrin.h with rte_vect.h to avoid __m_prefetchw conflicting
types.
- Replace POSIX usleep() API with rte API.
- Add a new macro for the access() API as the original function
has been deprecated on Windows.
- Add extra cflags '-fno-asynchronous-unwind-tables'
to avoid MinGW build error:
Error: invalid register for .seh_savexmm
- Add documentation to support ice PMD on Windows.
Update the release notes and features list for the same.
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Jie Zhou <jizh@microsoft.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enable IAVF driver to build on Windows as it is required
to build ice PMD.
Disable all other drivers from common directory.
This patch also includes fix for a macro redefinition warning
in the IAVF driver.
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Jie Zhou <jizh@microsoft.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
According to the suggestion of our legal department,
to standardize the copyright license of our code to
avoid potential copyright risks, we make a unified
modification to the "Hisilicon", which was nonstandard,
in the main modules we maintain.
We change it to "HiSilicon", which is consistent with
the terms used on the following official website:
https://www.hisilicon.com/en/terms-of-use.
Fixes: 565829db8b ("net/hns3: add build and doc infrastructure")
Fixes: 952ebacce4 ("net/hns3: support SVE Rx")
Fixes: e31f123db0 ("net/hns3: support NEON Tx")
Fixes: c09c7847d8 ("net/hns3: support traffic management")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch fixed cyclomatic complexity about MTU
in device configure process.
Fixes: 1f5ca0b460 ("net/hns3: support some device operations")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
