Break block comments that exceed common practice for line length.
Shorten wording for obvious things.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The actual port_hierarchy was deprecated and hidden in 2.1
so drop it from view in DPDK 2.2.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
To get pci_dev and vf number from dev, benefit from
existing macros in pci.h
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
[Thomas note: it breaks the old 2.6.33 support]
Without .map file, compiling error occurs when
CONFIG_RTE_BUILD_SHARED_LIB is enabled.
Reported-by: Guo Xin <gxin@ezchip.com>
Signed-off-by: Zhigang Lu <zlu@ezchip.com>
Fixes following error when Ubuntu 12.04 uses kernel 3.13.0-30-generic,
since skb_set_hash() is implemented in the kernel from 3.13.0-30,
which is declared as UBUNTU_KERNEL_VERSION(3,13,0,30,0) and not
UBUNTU_KERNEL_VERSION(3,13,0,30,54)
In file included
from /usr/src/linux-headers-3.13.0-30-generic/include/linux/if_ether.h:23:0,
from /tmp/dpdk/lib/librte_eal/linuxapp/kni/ethtool/igb/e1000_osdep.h:39,
from /tmp/dpdk/lib/librte_eal/linuxapp/kni/ethtool/igb/e1000_hw.h:31,
from /tmp/dpdk/lib/librte_eal/linuxapp/kni/ethtool/igb/e1000_api.h:31,
from /tmp/dpdk/lib/librte_eal/linuxapp/kni/ethtool/igb/e1000_mbx.h:31,
from /tmp/dpdk/x86_64-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/kni/e1000_mbx.c:28:
/usr/src/linux-headers-3.13.0-30-generic/include/linux/skbuff.h:740:1:
note: previous definition of ‘skb_set_hash’ was here
skb_set_hash(struct sk_buff *skb, __u32 hash, enum pkt_hash_types type)
^
Fixes: e88c3b0a ("kni: fix build on Ubuntu 12.04.5")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Problem:if I firstly insert my kmod_test.ko, then insert eventfd_link.ko,
error will happen with hint "Device or resource busy". This is because
the default minor device number, 0, has been occupied by my kmod_test.ko .
root@distro:~/test$ lsmod
Module Size Used by
kmod_test 927 0
vboxsf 35930 4
vboxguest 222130 1 vboxsf
microcode 10315 0
autofs4 25051 0
root@distro:~/test$ insmod ./eventfd_link.ko
insmod: ERROR: could not insert module ./eventfd_link.ko: Device or
resource busy
Explanation: For miscdevices, the major device_no is same, so the minor
device_no should be set to ditinguish different misc devices; if not set
the minor, it may fail while insmod due to the default minor value, 0, has
been used by other miscdevice. MISC_DYNAMIC_MINOR means to let Linux
kernel dynamically assign one minor devide number while loading.
Signed-off-by: Xiaobo Chi <xiaobo.chi@nokia.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The VHOST_USER_SET_VRING_ENABLE request was sent for each queue-pair.
However, it's changed to be sent per queue in the queue-pair by QEMU
commit dc3db6ad ("vhost-user: start/stop all rings"). The change
is reasonable, as we send all other request per queue, instead of
queue-pair.
Hence we should do proper changes to adapt to the QEMU change here.
Otherwise, a segfault will be triggered when last TX queue was enabled.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This patch fixes a bug under lower version linux kernel, mmap()
fails when length is not aligned with hugepage size. mmap()
without flag of MAP_ANONYMOUS, should be called with length
argument aligned with hugepagesz at older longterm version
Linux, like 2.6.32 and 3.2.72, or mmap() will fail with EINVAL.
This bug was fixed in Linux kernel by commit:
dab2d3dc45ae7343216635d981d43637e1cb7d45
To avoid failure, make sure in caller to keep length aligned.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
The patch fixes reset_owner message handling not to clear callfd,
because callfd will be valid while connection is established.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Describe how applications can benefit from CQE compression.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Secondary processes are expected to use queues and other resources
allocated by the primary, however Verbs resources can only be shared
between processes when inherited through fork().
This limitation can be worked around for TX by configuring separate queues
from secondary processes.
Signed-off-by: Or Ami <ora@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The number of available entries in TX rings is taken before performing
completion, effectively making rings smaller than they are and causing
TX performance issues under load.
Fixes: 2e22920b85 ("mlx5: support non-scattered Tx and Rx")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The number of available entries in TX rings is taken before performing
completion, effectively making rings smaller than they are and causing
TX performance issues under load.
Fixes: 7fae69eeff ("mlx4: new poll mode driver")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When MP to MR cache is full, the last (newest) MR is freed instead of the
first (oldest) one, causing local protection errors during TX.
Fixes: 2e22920b85 ("mlx5: support non-scattered Tx and Rx")
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When MP to MR cache is full, the last (newest) MR is freed instead of the
first (oldest) one, causing local protection errors during TX.
Fixes: 7fae69eeff ("mlx4: new poll mode driver")
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Pre-registering mbuf memory pools when creating TX queues avoids costly
registrations later in the data path.
Fixes: 2e22920b85 ("mlx5: support non-scattered Tx and Rx")
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Pre-registering mbuf memory pools when creating TX queues avoids costly
registrations later in the data path.
Fixes: 7fae69eeff ("mlx4: new poll mode driver")
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Buffers with too many segments are linearized to overcome
MLX5_PMD_SGE_WR_N, unfortunately the last segment is never sent.
Fixes: 3ee8444608 ("mlx5: support scattered Rx and Tx")
Signed-off-by: Jesper Wramberg <jesper.wramberg@gmail.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Buffers with too many segments are linearized to overcome
MLX4_PMD_SGE_WR_N, unfortunately the last segment is never sent.
Fixes: be11b35817 ("mlx4: move scattered Tx processing to helper function")
Signed-off-by: Jesper Wramberg <jesper.wramberg@gmail.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Indirect mbuf data may come from a different mempool which must be
registered separately as another memory region, otherwise such mbufs cannot
be sent.
Fixes: 2e22920b85 ("mlx5: support non-scattered Tx and Rx")
Signed-off-by: Jesper Wramberg <jesper.wramberg@gmail.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Indirect mbuf data may come from a different mempool which must be
registered separately as another memory region, otherwise such mbufs cannot
be sent.
Fixes: 7fae69eeff ("mlx4: new poll mode driver")
Signed-off-by: Jesper Wramberg <jesper.wramberg@gmail.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
A typo causes TX stats indices to be retrieved from RX queues.
Fixes: 87011737b7 ("mlx5: add software counters")
Reported-by: Nicolas Harnois <nicolas.harnois@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
A typo causes TX stats indices to be retrieved from RX queues.
Fixes: 7fae69eeff ("mlx4: new poll mode driver")
Reported-by: Nicolas Harnois <nicolas.harnois@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
CXGBE PMD depends on an alarm to periodically transmit any pending
coalesced packets and hence spins for a lock for each tx queue in the
alarm callback.
A better solution is to try to get a lock whenever possible, instead
of spinning for it.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Most dpdk examples and apps seem to initialize with a minimum of 128 rx
descriptors and 512 tx descriptors for queue setup. However, CXGBE PMD
enforces a minimum of 1024 descriptors. This causes the dpdk stack
to return -EINVAL because the apps do not request the minimum required.
The fix is to relax this enforcing in CXGBE PMD. A minimum of 128
descriptors seems to be a good number with the least impact on the
performance.
Fixes: 946c9ed956 ("cxgbe: get descriptor limits")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
The vector number may change during 'dev_start'. Before enabling a new vector mapping,
it's necessary to disable/unmap the previous setting.
Fixes: 7ab8500037 ("ixgbe: fix VF start with PF stopped")
Reported-by: Yong Liu <yong.liu@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The vector number may change during 'dev_start'.
Before enabling a new vector mapping,
it's necessary to disable/unmap the previous setting.
Fixes: fe685de2b1 ("igb: fix VF start with PF stopped")
Reported-by: Yong Liu <yong.liu@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
fm10k driver will meet compile error on non-x86 platforms due to
SSE instructions. Original implementation didn't have switch to
turn off vPMD.
The improvement introduces a macro to turn on/off vPMD functions,
it's on by default. On non-x86 platforms, it can simply be turned
off to fix compile issue.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
When the fm10k port is closed, both func tx_queue_clean() and
fm10k_tx_queue_release_mbufs_vec() will try to release buffer in
SW ring. The latter func won't do sanity check on those pointers
and cause crash.
The fix removed Vector TX buffer release func since it can share
the release functions with regular TX.
Fixes: fb9066e479 ("fm10k: reset and release mbuf for vector Tx")
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
vlan_tci should be copied from RX descriptor to mbuf,
and flag PKT_RX_VLAN_PKT should be set for every RX packet,
this patch fixes this issue.
Packets in fm10k device always carry at least one VLAN tag.
For those packets coming in without VLAN tag,
the port default VLAN tag will be used.
So in fm10k, always PKT_RX_VLAN_PKT flag is set and vlan_tci
is valid for each RX packet's mbuf.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
For i40e vf driver, should use I40EVF_WRITE_FLUSH to flush
configuration but not I40E_WRITE_FLUSH. This patch fixed this issue.
Fixes: be6c228d4d (i40evf: support Rx interrupt)
Reported-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
If DCB is not enabled, the BW info is not stored for VSI. This
patch fixes this issue by merging functions i40e_vsi_dump_bw_config
and i40e_vsi_get_bw_info together.
Fixes: c8b9a3e3fe (i40e: support DCB mode)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
When NVM version is updated to 5.x, DCB can not be configured. This
issue is because of the FW version validation is not correct.
This patch fixed this issue.
Fixes: c8b9a3e3fe (i40e: support DCB mode)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Yulong Pei <yulong.pei@intel.com>
As firmware does not support any link control from software driver
side, any phy config should be ignored as a workaround. Otherwise
the link might not be up again after binding back to kernel driver.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
It fixes the issue of not re-configuring hash enable flags (HENA)
if there is no key.
Fixes: d0a349409b ("i40e: support AQ based RSS config")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch removes the crc bytes from byte counter statistics.
Doing so fixes a bug that CRC bytes were included on TX but not
on RX, causing mismatch of bytes received / sent.
Fixes: 9aace75fc8 ("i40e: fix statistics")
Reported-by: Weichun Chen <weichunx.chen@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch removes the crc bytes from byte counter statistics.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch removes the crc bytes from byte counter statistics.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This fixes a bug added to em and igb drivers which causes the pci info
seen by the primary process to become invalidated by secondary process
startup.
This call was added after the process type check in the other drivers.
Fixes: eeefe73f0a ("drivers: copy PCI device info to ethdev data")
Signed-off-by: Jon DeVree <nuxi@vault24.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
When freeing the device it is also neccesary to free
rx_queues and tx_queues
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Issue: l3fwd app need the ptype in the mbuf to forward the packets properly.
But now some drivers like virtio driver and FVL vPMD will not set the ptype
in mbuf, so l3fwd cannot work properly on that kind of drivers.
Configure the vector PMD option as no for default as a work around for l3fwd.
After the l3fwd app can handle the undefined ptype or the i40e vPMD can
return the ptype, the option will be set as yes for default again.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Add a sanity check for number of tx descriptors requested during tx
queue setup. Return -EINVAL if the number requested does not meet
the tx descriptor requirements of the device.
Fixes: 80a1deb4c7 ("ethdev: add API to retrieve queue information")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
It prevents some drivers to load:
undefined symbol: rte_eth_dma_zone_reserve
Fixes: 719dbebceb ("xen: allow determining DOM0 at runtime")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Not all filesystems supply struct dirent d_type field, in which case
everything in the specified directory would go ignored. One such
filesystem being XFS which RHEL 7 defaults to... stat() the entries
instead.
Fixes: 9f8eb1d9ca ("eal: support driver loading from directory")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
The added error checking on plugin initialization in
commit 9f8eb1d9ca broke the ability of
loading plugins by their basename from default linker locations.
Only use stat() for directory discovery and leave error handling
to dlopen() to restore former behavior.
Fixes: 9f8eb1d9ca ("eal: support driver loading from directory")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
No need for those forward declarations (which breaks build when asking for
C++11 or adding pedantic flag).
Signed-off-by: David Marchand <david.marchand@6wind.com>
It does not build with every C++ compilers.
Reverts the _UNDERLYING_TYPE workarounds to prepare
for another fix in the next patch.
Fixes: 621389bbbe ("eal: fix C++ app build")
Signed-off-by: David Marchand <david.marchand@6wind.com>
CLOCK_MONOTONIC_RAW added in glibc 2.12, using this define in older
glibc versions cause compile error:
'error: identifier "CLOCK_MONOTONIC_RAW" is undefined'
This patch replaces "CLOCK_MONOTONIC_RAW" with "CLOCK_MONOTONIC" for
older glibc versions, versions that support "CLOCK_MONOTONIC_RAW"
will keep using this clock type.
Fixes: d08d304508 ("eal/linux: make alarm not affected by system time jump")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
