Add the "tunnel_filter" command in testpmd to test the API of VxLAN
packet filter.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
The filter types supported are listed below for VXLAN:
1. Inner MAC and Inner VLAN ID.
2. Inner MAC address, inner VLAN ID and tenant ID.
3. Inner MAC and tenant ID.
4. Inner MAC address.
5. Outer MAC address, tenant ID and inner MAC address.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Add definitions of the data structures of tunneling packet filter.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add two commands to test VXLAN packet identification.
The test steps are as follows:
1> use commands to add/delete VxLAN UDP port.
2> use rxonly mode to receive VxLAN packet.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Implement the configuration API of VXLAN destination UDP port,
and add new Rx offload flags for supporting VXLAN packet offload.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Add two functions to support UDP tunneling port configuration.
There are "some" destination UDP port numbers that have unique meaning.
In terms of VxLAN, "IANA has assigned the value 4789 for the VXLAN UDP port,
and this value SHOULD be used by default as the destination UDP port.
Some early implementations of VXLAN have used other values for the destination
port. To enable interoperability with these implementations, the destination
port SHOULD be configurable."
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Replace the "reserved2" field with the "packet_type" field
and add the "inner_l2_l3_len" field in the rte_mbuf structure.
The "packet_type" field is used to indicate ordinary packet format and also
tunneling packet format such as IP in IP, IP in GRE, MAC in GRE and MAC in UDP.
The "inner_l2_len" and the "inner_l3_len" fields are added
in the second cache line, they use 2 bytes for TX offloading of tunnels.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The 1.7 DPDK_Linux_GSG document in MSWord has been converted to rst format for
use with Sphinx. There is an rst file for each chapter and an index.rst file
which contains the table of contents.
This is the first document from a set of documents.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
The packet passed to virtio_tx_route has been allocated
mbuf, so there is no need to allocate mbuf for it.
Use vlan offload to transmit vlan tagged packet.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
[Thomas: remove useless mbuf pool]
In switch_worker and virtio_tx_local, rte_vhost_enqueue_burst is called to
push host packets to guest VM.
Before enqueue packets to guest VM, vhost example uses configure-able retry logic
to wait for enough vring entries.
In switch_worker, rte_vhost_dequeue_burst is called to get packets from guest VM,
then virtio device will be bound to a queue in VMDQ for the first transmitted
packet.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
check_hpa_regions, fill_hpa_memory_regions and hpa memory region
data structure are added back from old virtio-net.c.
Add hpa (host physical address) region generation/destroy logic.
gpa<->hpa memory translation regions are generated at new_device,
when a virtio device is ready for packet processing.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Define vhost_dev data structure.
Change reference to virtio_dev to vhost_dev.
The vhost example use vdev data structure for switching related logic
and container for virtio_dev.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Those functions are integrated into the user space vhost library:
virtio_dev_rx, virtio_dev_merge_rx, virtio_dev_tx, virtio_dev_merge_tx,
copy_from_mbuf_to_ring, gpa_to_vva.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
This patch copies two files main.c/main.h from most recent vhost example
(before transforming into a library) as the base for new vhost example.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Link bonding broadcast mode requires refcnt parameter in the mbuf struct to
allow efficient transmission of duplicated mbufs on slave ports.
This patch disables broadcast mode when the complication option RTE_MBUF_REFCNT
is disabled to allow clean building of the bonding library.
A warning message notify user of disabling of broadcast mode.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Fix compilation warning 'missing-field-initializers' for some GCC and clang
versions introduced in commit 0c6bc8e due to the use of C89/C90 initializers.
Using C99-style initializers
Signed-off-by: Marc Sune <marc.sune@bisdn.de>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The previous implementation of rte_kni_alloc() was allocating memzones with a
name composed of a fixed string and the interface name. When an application was
allocating and deallocating multiple interfaces with different names, memzones
were quickly exhausted, even though memzones from deallocated interfaces were
never used anymore (unless an interface with the same name was re-allocated).
As a result, the application was unable to allocate more KNI interfaces with
different names.
This patch implements the KNI memzone pool in order to prevent memzone
exhaustion when allocating/deallocating KNI interfaces. It adds a new API call,
rte_kni_init(max_kni_ifaces) that shall be called before any call to
rte_kni_alloc() if KNI is used. The memzones are pre-allocated with interface-
independent names so that they can be reused.
Signed-off-by: Marc Sune <marc.sune@bisdn.de>
Acked-by: Helin Zhang <helin.zhang@intel.com>
An error has been introduced by commit 1f22652ca8
("fix perf regression due to moved pool ptr").
Fix the case where RTE_MBUF_REFCNT is disabled.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Only provide empty handler.
It can be completed to support filter features on fortville.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: remove unused empty functions]
Define a new API umbrella to configure any kind of Rx filtering.
New functions:
- rte_eth_dev_filter_supported
- rte_eth_dev_filter_ctrl
Filter types, operations, and structures are defined specifically in new
header file lib/librte_eth/rte_dev_ctrl.h.
As to the implementation discussion, please refer to
http://dpdk.org/ml/archives/dev/2014-September/005179.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
[Thomas: rename ops and remove unused types]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
i40e hardware supports RSS in VF.
It's now supported in this driver.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
To reuse code, 'i40e_config_hena()' and 'i40e_parse_hena()' and
their relevant macros need to be extern, and then can be used for
both PF and VF parts.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Forced type conversion is not needed to define a macro with
constant. The alternate is to let compiler use the default width,
or specify the width with suffix of 'U', 'UL', 'ULL', etc.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
The four-byte-key (fbk) autotest was allocating the keys to be used for
the test on the stack. When the number of entries in the table was
increased significantly, for example, to test larger hashes by increase the
value of ENTRIES, this array of keys was greater than that
allowed on the stack, and so caused problems, i.e. crashes and core dumps.
The solution is to have the keys dynamically allocated on the heap using
malloc. Now if ENTRIES is increased and we run out of memory we get an
error message instead of a crash.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The maximum mount contiguous memory regions for FreeBSD is limited by
RTE_CONTIGMEM_MAX_NUM_BUFS, a pointer to each region is stored in
static void * contigmem_buffers[RTE_CONTIGMEM_MAX_NUM_BUFS]
A user can specify a greater amount via hw.contigmem.num_buffers,
while the allocation logic will prevent this allocation from occuring the logic
in contigmem_unload() will attempt to free hw.contigmem.num_buffers and an
overrun occurs.
This patch limits the freeing to a maximum of RTE_CONTIGMEM_MAX_NUM_BUFS.
Signed-off-by: Alan Carew <alan.carew@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Commit fbde27f1 (get default Rx/Tx configuration from dev info),
introduced a bug, which caused memory corruption in dev_info.
To get RX/TX configuration, both rx/tx queue setup functions were calling
dev_info_get from PMDs, so dev_info structure was not being reseted
before being populated.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
With make 3.x, guides-% is matched instead of guides-%-clean.
Move the less specific target pattern (guides-%) at the end
to allow matching guides-%-clean first.
Reported-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add minimal configuration and index to validate new rules
inside "make doc" and "make doc-clean".
RTE_SPHINX_BUILD can be overriden.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
RTE_OUTPUT variable is always defined, unlike $O.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Since commit 13ce5e7eb9 ("virtio: mergeable buffers"),
this driver has the capability of receiving and transmitting jumbo frame.
So update max Rx packet length.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Tested-by: Jingguo Fu <jingguox.fu@intel.com>
At least on kernels 3.15 or newer, wrong compiler flags are set when building
kernel modules.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Linux kernel build system requires V=1 to enable verbose output, but
current DPDK framework just check if V is defined.
Fix: force V=1 when building Linux kernel modules if verbose output is
enabled.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It fixes the compile error as below on gcc version 4.3.4.
cc1: error: unrecognized command line option "-Wno-unused-but-set-variable"
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Zhaochen Zhan <zhaochen.zhan@intel.com>
Fix one issue in virtio TX: it needs one more vring descriptor to hold the virtio
header when transmitting packets, it is used later to determine whether to free
more entries from used vring.
It fixes failing to transmit any packet with 1 segment in the circumstance of only
1 descriptor in the vring free list.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
vhost lib is turned off by default.
vhost lib is based on cuse, which requires fuse development package
to be installed.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
[Thomas: fix build dependencies]
1) FIXME: concurrent calls to vhost set mem table from different guests
could cause mem_temp to be overrided.
2) TODO: cmpset cost quite some cpu cyles. Allow app to disable this
feature if there is no contention in real workload.
3) FIXME: fix scatter gather mbuf copy to vhost vring chained buffers.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
